Skip to main content
SarahN
Local Superstar
Jul 6, 2023 8:38 PM UTC

BT Smart Hub 2 possible issues

Hi

Is anyone in the UK who has a BT Smart Hub 2 having any issues with speakers disappearing or showing as not connected in the app? I’m having this issue lately both on my Android phone and iPad. I noticed the BT hub had an update at the end of June so don’t know if BT have messed it up again.
 

My SonosNet speakers are fine and if my wifi speakers connect to the Wi-Fi disc on my landing they are fine in the app. If and when any show as not connected in the app, I know they are actually connected though, as if any music was queued on them, I can still manually press the play button and they will play. So it seems like a communication issue between the app and the router. Very frustrating indeed. 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

21 replies

Senior Virtuoso
Jul 6, 2023 10:01 PM UTC

Uneducated Brits ;)

😀😂

At least we can pronounce both the i’s in aluminium. 😜

Translate
SarahN
SarahNAuthor
Local Superstar
Jul 6, 2023 10:02 PM UTC

Uneducated Brits ;)

😀😂

At least we can pronounce both the i’s in aluminium. 

Haha, good comeback! 😂

Translate
Can you have too many Sonos speakers? 🤔 😆
Ken_Griffiths
Jul 6, 2023 11:11 PM UTC

Thanks @Ken_Griffiths 

I have only had this issue in the past week or 2 hence why I thought it could be that recent software update. SonosNet is an advantage with the silly BT routers!

It will be interesting to see if your daughter has any issues with her Era 300 in the app.  The annoying thing is the speakers are clearly connected to the network ok - they just don’t show, or show disconnected in the app!

Yes, that sounds rather like an SSDP ‘device discovery’ issue. One answer is to ‘bridge’ the BT router and simply use it as a modem and just put your own router off that ISP provided device, or another option is to switch off the BT routers WiFi adapters and use your own WiFi mesh hub system, bridged to the BT router instead and use that WiFi network in AP (access point) mode. Both types of setup will come at a cost of course, but more often than not, will resolve the device discovery issue. A third option is to consider switching ISP provider. However…

Sometimes it can be the mobile Sonos controller device that’s having a difficult time discovering the Sonos products on the local network subnet …and that’s most often due to security software running on the mobile/tablet, such as VPN client/Firewall/Antivirus software etc. so it’s worthwhile just seeing what happens when trying a different Sonos controller device, just to eliminate it being the mobile controller before looking at the other options mentioned.

Translate
Ken_Griffiths
Jul 6, 2023 11:26 PM UTC

@SarahN,
Just to also say if using SonosNet, then ensure the BT router is not using the same WiFi channel. Also set the BT routers 2.4Ghz band to a non-overlapping channel 1, 6 or 11 and switch the channel-width on that band to 20Mhz only (highly recommended) as that greatly reduces interference. You can leave the 5Ghz band alone and if the issue persists, then just as a temporary measure you could consider switching off the routers 5Ghz band and just put all on the 2.4Ghz band - that tends to solve the discovery issue with some BT routers, but it’s not an ideal long term method to use.

Some users believe too that it’s worthwhile reserving all Sonos IP addresses in the routers DHCP reservation table - it’s worth doing, but it is optional.

Hope the suggestions help.👍

Translate
SarahN
SarahNAuthor
Local Superstar
Jul 7, 2023 5:59 AM UTC

@Ken_Griffiths  - thanks for your replies 🙂

So regarding SonosNet, I do keep any eye on the 2.4 WiFi channel and make sure it’s set to a different one to my own router and my very nearby neighbour. Like I say though, I never have an issue with my SonosNet speakers.

Not sure I fully understand your points about using my BT Router as a modem only - sorry I’m not very technical about these kind of things. One thing I do know though, is that if any of my WiFi only speakers are connected to my BT WiFi disc upstairs (this is the black disc that BT make to use off the BT HUB router), then that also is OK for some reason………..

Regarding the controller device, it isn’t that as this problem happens with both my Android phone and my iPad.

The update on the BT hub was done on 29/06 and I think that might coincide with this issue but I cannot be sure.

Oh the other thing I did last night was to change the Wireless Mode to Mode 2 - I did used to have it set to this but a few weeks ago, I changed it to Mode 1. Maybe this will help? 

Translate
Can you have too many Sonos speakers? 🤔 😆
Ken_Griffiths
Jul 7, 2023 8:21 AM UTC

I’m not sure what mode 1 and 2 are that maybe something that BT use - ISP provided routers are very rarely the best equipment to use and some have what is called Bridge or Modem mode where the router behaves like a modem and passes the WAN connection along to your own router … if you decide to go down that route at any point in the future. This forum link explains a little more about the process…

https://business.forums.bt.com/t5/Blogs/Advantages-of-using-bridge-mode-on-BT-Smart-Hub-2/ba-p/88650

Translate
SarahN
SarahNAuthor
Local Superstar
Jul 7, 2023 8:32 AM UTC

Thanks @Ken_Griffiths 

Translate
Can you have too many Sonos speakers? 🤔 😆
Corry P
Sonos Staff
Jul 7, 2023 8:55 AM UTC

@Corry P - as you’re in the UK, do you have any info on this?

Hi @SarahN 

It has been a while, but as far as I remember, Mode 1, 2 and 3 refers to WiFi 802.11 b, g or n, respectively. We used to set it to Mode 2 for the best operation, though that was before Sonos started making better use of 5GHz.

I also remember having to turn both UPnP options off.

Regarding firmware versions/changes, however, I am not up-to-date.

I do agree with @Ken_Griffiths, however - if you pay about £50 or more for a router, you will get better results than from using a free router. If you have BT extenders, however, the answer may be a bit more convoluted, but a proper mesh system will likely perform better (BT Wholehome is not a “true” mesh system).

I hope this helps.

 

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
SarahN
SarahNAuthor
Local Superstar
Jul 7, 2023 9:05 AM UTC

Thanks @Corry P  - I have just turned off the UPnP thingy.

I will leave the Mode set to 2 I think as since doing that, it seems more stable (that could of course be a coincidence) 

Translate
Can you have too many Sonos speakers? 🤔 😆
Belly M
Jul 7, 2023 9:43 AM UTC

Just to add if you have BT’ digital voice and a phone plugged into the router then you are stuck with using the supplied BT trash until such time you move ISP.

Translate