I have a decent understanding of TCP/IP networking, but am by no means an expert. I have recently upgraded from consumer grade router to pfsense+unifi switch and AP config. I have designed my network so that I have 3 separate segregated networks, on different VLANs. MAIN LAN, IOT LAN, GUEST LAN. Like many other folks before me, according to the hours I have spent reading forums, I am having an issue getting APP on MAIN to work with SONOS on IOT. Every one of my other 7 smart device work just fine, with Avahi mDNS/DNS-SD reflector, but not SONOS. I have been playing with IGMP Proxy as suggested on many forums and still nothing. Why is this so complicated? From what I have read to date, there are enough people experiencing issues, that I would say warrant either a more standardized operation, or at least a Note on procedures to get this functioning. (Understanding that they cant be so specific as everyone owns a different type of network setup). With security becoming more and more important, configurations such as mine are becoming more and more common. Either a more standardized operation, or posted procedures, would eliminate a lot of frustration both from customers, and SONOS. No??
At the moment I am making do with temporarily moving to IOT network to control SONOS, but that will get old quick. I shouldnt have to redo my entire firewall config, and risk security, just to make these devices work.
And to see directive to search Google, just makes it that much worse.
These are higher end products, and deserve higher end customer service.
Any assistance, and time saving, SONOS can provide would be GREATLY appreciated.
Best answer by rattyView original
Sonos was designed for single-subnet home use, but it can be made to work between subnets. See https://en.community.sonos.com/troubleshooting-228999/multiple-subnets-vlans-and-sonos-workable-clavister-solution-30950
See if that works and then you can start tuning down the ports, IPs on the home side as needed.