Skip to main content
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

60 replies

cnewlanderAuthor
Enthusiast I
Nov 10, 2006 4:07 AM UTC
Remove the rubber matting.

http://farm1.static.flickr.com/105/293504580_14352dc606.jpg
Translate
cnewlanderAuthor
Enthusiast I
Nov 10, 2006 4:10 AM UTC
matting remvoed. Remove the six screws hold the upper and lower assembly piece together.
The screws at the top right and bottom left are longer then the other four.

http://farm1.static.flickr.com/106/293504579_d5d5a9efeb.jpg
Translate
cnewlanderAuthor
Enthusiast I
Nov 10, 2006 4:14 AM UTC
Carefully separate the pieces. You will probably want to turn the controller off before actually doing this.

http://farm1.static.flickr.com/107/293505010_7bdb3e0ad2.jpg
Translate
cnewlanderAuthor
Enthusiast I
Nov 10, 2006 4:15 AM UTC
The two assembly pieces are separated.

http://farm1.static.flickr.com/114/293505008_a7ca54d314.jpg
Translate
Graham - Sonos
Retired Sonos Staff
Nov 10, 2006 4:15 AM UTC
Do this at your own risk. You will no doubt void your warranty if you break something.


A good warning, and to clarify, you'll void your warranty even if you don't break anything.

-graham
Translate
cnewlanderAuthor
Enthusiast I
Nov 10, 2006 4:17 AM UTC
This picture shows the gasket. It is the small orange line around the perimeter of the bottom assembly. It feel like silcone and will probably take a very long time to dry out. If it does some rtv silcone from the local auto parts would probably work nicely if needed.

http://farm1.static.flickr.com/118/293504577_7180a6e169.jpg
Translate
cnewlanderAuthor
Enthusiast I
Nov 10, 2006 4:18 AM UTC
Now it gets interesting

http://farm1.static.flickr.com/106/293504576_6f38551031.jpg
Translate
cnewlanderAuthor
Enthusiast I
Nov 10, 2006 4:19 AM UTC
Battery unplugged.

http://farm1.static.flickr.com/111/293504574_94c8b591ba.jpg
Translate
Graham - Sonos
Retired Sonos Staff
Nov 10, 2006 4:20 AM UTC
Here is a picture of the battery i found from the last CR100 i assembled... its soft sided and can easily be damaged if bent, caught on an edge etc. If the skin is punctured the battery could overheat or malfunction.

[FONT=Times New Roman][SIZE=3]
[/size][/font]
Translate
cnewlanderAuthor
Enthusiast I
Nov 10, 2006 4:21 AM UTC
Close up of the battery plug.

http://farm1.static.flickr.com/105/293504573_abd3a43d05.jpg
Translate
Show more replies
Terms & ConditionsAccessibility statement