Talk Sonos Products
What Sonos product is best for you? How do you expand your Sonos system? Have a Sonos tip or trick to share? Show off your setup and your products here.
I am using a Sonus ARC Sonus Sub TV: LG 65UN6955ZUFWhen I turn on the TV using the Streaming box (AT&T) remote which also controls my Sonus ARC, there is no sound from the Sonus ARC.I then to power everything down, and then power up. Then the sounds come from the Sonus ARC.I power down with the remote The following day I need to go through the same process to get sound out of the Sonus ARC. How can I fix this??
The Sonos EQ setting are very nested with in the application it feels. They require multiple button presses to access which is annoying to say the least. The Bose application has a simple floating bubble located with in the application that has your connected device in it. When pressed you have instant access to EQ and other features for that device. Something similar in the Sonos App would be nice to see.
sound goes in and out when connected to sonos arc HDMI when I first turn on Samsung Frame tv. I have to unplug the HDMI cable for a few minutes and then plug back in for it to work properly. only happens when I turn TV off and then later come back and turn TV on.
My family installed Sonos in a condominium complex that provides high speed Wi-Fi. The signal is strong enough to support Sonos, keep the music streaming (for the most part) but when we want to change the volume or the song we often have to reconnect our phones through the network and then to the Sonos (first world problems I know). Would a Sonos boost or any other product (remote or something I’m overlooking) help this issue? I am essentially looking for something to stay connected to my network so I can control the app?
I've just upgraded from the Connect to a Port so I can use the new Sonos app across all my devices. I think I'm probably OK to live without the buttons on the old Connect but it would be great if the Status Light on the Port showed white when it was playing but turned off when it's not playing. There only seems to be an option to have the Status Light on or off in the app. - but that seems to be irrespective of the status of the Port. So I might be missing something but in normal use it doesn't seem very useful... Also since I'm playing through an amp Onkyo TX-NR696 (which turns on when I play from Sonos) I'm left wondering what happens when I turn the amp off. Does the Port keep playing? Maybe that's a philosophical question but it would be great if when I turned the amp off, that the Port knew and would stop playing and the Status Light would go out to show that.I'm not sure of the power consumption difference between playing and sitting idle but I know my old Connect would get
I have tried both sonos apps and neither work. When I press the app to launch it, all i get is the splash screen and that is it. No errors no nothing . The splash screen is all I get. I just got a new phone running iOS 14.2 and installed the apps from my backup of the old phone. Allow Network access is on for both app versions. What the heck do i do now.
feature request: when moving SUB in settings to another room. Settings made for the sub should be remembered
Hi i have a requestas a userI wish to move my sub from one room to another without losing the settings I made for it in the first placeso I do not have to set it up the sub level every time i move it to another room.Background:our Living room is big I have a soundbar where my sub normally is connected to, but when i want to hear Music i normally move the sub to my 2 play5s. I do this a lot and i found that it could be nice i there where an option where my first settings for the sub was remembered(make it optional) hope you understand my request Else feel free ti contact me.
Equipment Playbar, Subwoofer, 2x Play:1 connected to Panasonic TV 55FZ800 - All configured correctly and working. TV speakers disabled. Sonos S1 controller (due to old AMP and Play 5 in system). My issue is with the intermittent operation of rear speakers when watching sport highlights on TV.When there is studio chat this plays from Playbar only but when the chat continues and they shows some game highlight, the rear speakers kick into life and play both studio commentary and (artificial) crowd noise from the game. Does anyone else experience this and find it annoying? Is there a solution to it? Thanks in advance all for your help. Merry Christmas
I still don’t have any sonos product but I’m thinking about buying some of them for my house. I want to buy a pair of outdoor speaker and conect them to Amp and my turn table for my terrace. My question is, can i have a Five speaker inside my house and group it with amp in order to listen the same inside and outside? Thanks
Excuse the perhaps silly question but I’m stumped. If I have the Sonos Amp, and the Rega Planar P1 turntable (which has no preamp), how can I get them working with my Sonos Five to play my records? Any advice is massively appreciated! Thank you.
I’ve got Playbar and two Play 1 set up as sorround. Right sorround keeps dropping off. Multiple factory reset , connecting to ethernet has not helped at all. I then took this to sonos support and spend over 2 hours on chat / phone call / remote session giving access to my computer. my router settings chagnes multiple times , router rebooted multiple times. All Sonos rebooted multiple times , ungroup sorround and regroup it. But nothing helped. It’s only with Right side sorround speaker the problem. After spending much long time on my computer thru remote doing commands / pings / changing IP settings Sonos engineer just does not want to give up and looking at me as if one trying to score free speaker. With sonos I would expect some trust in customers and be fair just replace the bloody faulty bit , why piggy bank on customers to figure out issue with your software while in this case it’s evident hardware is at fault.
I have a surround system in my media room with a beam, sub, and two sonos 1’s as rear speakers.I also have one in my bedroom, and 1 in the kitchen. These are used very rarely, so I want to add them to the media room. So, I went into my app, and renamed the bedroom to media room, and kitchen to media room- now there are two media rooms in the app. How can I add the two sonos one’s as front left, and front right in the media room? Why does this have to be so difficult. arrgh!
I have a Sonos beam and sub connected to my TV, plus a mix of One SLs and Symfonisks in other rooms. I notice that when I group my kitchen speakers with the Beam and Sub for TV watching, the kitchen is delayed slightly, creating an very slight echo. I have already reduced the latency on the system to 70ms. I would love to be able to introduce a slight delay (30ms?) to the TV so that the Beam and Sub could be in perfect sync with the Kitchen speakers. I understand that this would affect lip sync on the Beam with the TV, but I am willing to accept this. I think it would be a great option.
Login to the community
Log in or register to reply
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.