Home theater

Get help with your Ray, Beam, Arc. Playbar, Playbase. How do you set up a Sonos 5.1 system and TruePlay it? Which Sonos product work with your TV? Get help with your home theater questions

  • 4,691 Topics
  • 25,408 Replies
Stanley_4
Stanley_4
solved this question

Sonos Era 300 placement for surround

I’d say place the 300s for optimum TV sound and add a stereo pair positioned to work for sitting at the table, or a Five if you can’t find p...
  • 0
  • 1
BJOutdoors
BJOutdoors
started this topic

Two independent systems

I have two SONOS systems. I would like to set them up to operate independently of each other. How do I do that?
  • 0
  • 15
AjTrek1
AjTrek1
started this topic

Arc Placement

Updated 9/14/23 to include Era 300’s as surrounds (which have upward firing drivers) that replaced Sonos One’s. All other information and gu...
  • 7
  • 22

4691 Topics

C
Church15Contributor I
asked in Home theater

Is it worth upgrading from Playbase to Beam Gen 2?

I have a Sonos Playbase, Sub and 2x Play 1s for my home cinema setup.  I’ve been curious about Dolby Atmos, which is compatible with my TV but not the Playbase. I get decent surround sound by using AirPlay but I was wondering if it could be improved by replacing the Playbase with the Beam 2nd Generation to get Dolby Atmos. Is it worth the upgrade? Thank you!

4
106rallye
18 days ago
A
achwedecContributor I
asked in Home theater

sound breaking every 30-60 sec after update to 16.1.1

Dears, I noticed severe quality degradation since system was updated to 16.1.1. Sound is breaking every 30-60 sec. Any solution here? My set: Beam 2 + MiniSub+ 2xOne

1
Airgetlam
19 days ago
M
metricrulerContributor I
asked in Home theater

Architectural 4.1.4

Hi all, So I have 2 front and 2 rear in wall architectural rectangular speakers and 4 in wall architectural ceiling speakers. This is for a TV setup. Originally I wanted a 5.1.4 setup but wanted to stay with Sonos for ease.I know I can set up the front and rears with 2 Amps and surround, making a phantom center. Is there any solution to add in the ceilings with another amp or two into this setup? Do I need to just get a receiver, and if I do will the phantom center be less effective? I'd prefer not to add an Arc because of the crowded look between the TV and mantle… but would consider it if it was the only solution.

2
M
19 days ago
F
Fabrice49320Contributor I
asked in Home theater

ray ne fonctionne pas sur TV

Bonjour la communauté, j’ai un système sonos s1 qui fonctionne bien et qui n’est pas compatible avec S2.j’ai acheté une Ray que j’ai branché sur ma TV avec un câble optique qui a fonctionné immédiatement.j’ai eu le malheur de vouloir la synchroniser avec le reste de mon système S1 ; je me suis rendu compte après coup que la ray n’était pas compatible ( uniquement S2)j’ai réinitialisé la ray en espérant tout effacer et la rebrancher sur ma TV et m’en servir que pour le son .depuis elle clignote en vert mais ne fonctionne plus ;pouvez vous m’aider SVP ?j’espère ne pas avoir tout planté    

1
Airgetlam
19 days ago
L
lbspotsContributor I
asked in Home theater

Sonos Beam with Samsung the Frame TV and Sonos One Speakers

I have two questions: I recently purchased a samsung the frame tv and have a Sonos beam sound bar. The sound bar is connected to the One Connect box and produces volume, but there is no way to control the volume using the Samsung remote. Can I change this?   I have two Sonos One speakers that are connected to my living room. I tried adding the beam to the same Sonos group, but I get an error that my app is not the right one. I’ve uninstalled the Sonos 1 and Sonos 2 apps about twenty times, and I cannot get the app to recognize the sonos beam at all?

5
Airgetlam
19 days ago
H
hernan.armbrusterContributor I
asked in Home theater

One of my two Sub always gets disconnected

I am a long term customer of Sonos. Currently I own more than 20 devices. In my home theater I have an Arc, two 300's, and two Subs, one of them is a Gen 1 and the other Sub is Gen 3. My Gen 1 Sub shows as "Not connected", and for a couple of years now… I tried resetting many times, changing positions, etc. I don't know what else to do. Any recommendations? 

1
Airgetlam
19 days ago
A
Alex1980Contributor I
asked in Home theater

disabling Beam and only enable Five and Sub while playing music

I would like to disable my Beam and only enable the 2 Five and my sub while playing music.an option should be added.a similar option is already available for the sub and the surrounds.

6
jgatie
19 days ago
S
StrayCat17Contributor I
asked in Home theater

Cant Adjust Volume - No Current Suggestions Work

A few months ago we added a Sonos Arc to our LG G3 TV.  It worked great except that volume control only worked on the TV remote, but not the cable remote.  Then one day the volume control suddenly stopped working on BOTH remotes. So I can hear the volume but I cannot adjust it except by getting up and doing it by hand.  I’ve tried the LG Magic Remote specific instructions listed elsewhere, but they make no difference (when they even match what’s on my tv).   I’ve tried resetting the remote, making sure CEC is enabled, and changed just about every setting on my TV, but none of it makes a difference. Getting increasingly annoyed.

9
buzz
19 days ago
C
Coline POUGETContributor I
asked in Home theater

one SL

Bonjour je viens de réinitialiser mon enceinte one SL car j’avais changé de wifi. Mais maintenant dans l’application j’ai un message sur la connexion: un câble ethernet connecté à votre routeur est nécessaire pour désactiver le wifi.hors je suis en wifi et je ne veux pas désactiver le wifi, mon système est bloqué et je ne peux me servir de mon enceinte, une idée?

1
Airgetlam
20 days ago
A
AfteraffectContributor I
asked in Home theater

switching between home theater and listening to music (on phone)

Hi I am looking to buy the home theater package with era300 speakers and Arc. One thing that's important to me is being able to switch from home theater setup connected to TV and then listening to music in stereo via the app with just the two era300 speakers (via the Sonos app on phone) with ease.  Is this easily. Any responses greatly appreciated 👍

6
A
20 days ago
G
Gman1341Contributor I
posted in Home theater

Connect a Sonos soundbar to a Sonos Amp and a Sonos Port

Hello, I have a client who is already in the Sonos system. He has a pool house with a TV and wants to add a soundbar. He would also like to play the TV to 2 speakers mounted on the pool house and possibly to the speakers around the pool. Not all the time but likes the option. I was going to suggest a Sonos soundbar for the TV. Then a Sonos amp for the 2 speakers on the pool house and a Sonos port to connect to the amp for the speakers/sub around the pool. Will this work? Can the TV audio going to the soundbar connect to the Sonos Amp and the Sonos Port through to the mesh network? Can you group and ungroup the speakers through the app?I would probably leave the pool house speakers and the pool speakers permanently grouped or bonded and add or subtract the TV soundbar when needed if possible. Let me know if this is possible and if I’m going in the right direction.Thanks

7
buzz
20 days ago
R
RexstricklandContributor I
posted in Home theater

Connecting Sonos Ray with Denon AVR-S970H 5 ceiling speakers and sub

I just bought a Sonos Ray to compliment a newly purchased Denon AVR-S970H, five in ceiling speakers and a sub woofer.  I cannot figure out how to incorporate the newly bought Ray into my existing surround sound set-up.  I tried connecting the optical cord to the AVR, but both optical ports on the AVR are input, not output.I am not an audiophile, so I need some help.  Both Sonos and Denon CSR’s were not helpful.Can I connect the Ray to the AVR via HEOS or Wi-Fi?Any assistance would be appreciated.  Thank you!

3
R
20 days ago
R
Ralph999Contributor I
posted in Home theater

Connection of Hearing Aids

This may not be directly related to the Sonos product but I am hoping one of the Sonos community has had the same issue and been able to resolve it.I have Oticon Minirite 1 hearing aids that use a streaming device to connect to the optical output on a TV to stream the audio from the TV to the hearing aids via bluetooth.I have an LG G3 TV and a Sonos Beam Gen 2 soundbar.If I connect the Beam Gen 2 via the eArc connection the TV locks out all other audio outputs (bluetooth and Optical). The result is I can’t have my hearing aid streamer and the soundbar connected at the same time.I have contacted LG and everything they recommended I try didn’t work. In the end they advised that this is how eArc works as it is the best audio output so all other outputs are disabled.I have an older LG that has Arc and if it is connected to a soundbar all other outputs still operate.Has anyone had the same experience and found a resolution?ThanksRegardsRalph

8
R
21 days ago
N
Nico33Contributor II
posted in Home theater

Sub or sub mini and where to place

Hi,Any recommandations between the Sub & Sub mini to add to Beam and 2 era 100 ?Also where to place ? In front, side, back ?Thanks for the help

4
Schlumpf
21 days ago
melvimbe
melvimbe
posted in Home theater

Arc 2 Speculation

https://www.techradar.com/televisions/soundbars/why-the-sonos-arc-2-is-my-most-anticipated-tv-upgrade-of-2024 I ran across this article and thought it was interesting.  I am generally skeptical that an Arc 2 will come out any time soon, but the projected features are interested, and perhaps worthy of a discussion.1 - wireless content.   I think this is a bit more complex that the author states.  Not only does the TV or projector need to send the audio data (and control) wirelessly to soundbar, but it would need to have in built in controls over the timing to make sure audio and video are in sync.  An HDMI dongle might be able to do this, but it would have to be on the source side, meaning you can’t use your smart TV apps for it, meaning you’ve still got to have wires.I tend to think wireless content is overrated anyway.  The TV and the soundbar both need power cords, and I don’t think 2 cords is significantly better over 3.2- smaller size.  I am not bothered by the Arc size.  If your T

14
controlav
21 days ago
Y
Yeti BashTrending Lyricist I
posted in Home theater

Beam Gen 2 Popping/Crackling On Video Start/Stop

Hi all,I recently replaced my Beam Gen 1 with a Gen 2 and, since then, I have noticed a popping/crackling sound whenever I start and stop videos on my Apple TV. I observed this behavior in Netflix and Prime. This issue did not happen at all with my Gen 1, and all of the equipment and chords are the same. Equipment SettingsApple TV 4K, Model A1842Video > Format > 4K SDR Video > Match Content > Match Dynamic Range > On Video > Match Content > Match Frame Rate > On Audio Format > Change Format > Off Audio Format > Dolby Atmos > OnSony BRAVIA XR A80JAudio > Sound mode sync > On Audio > A/V sync > Auto Audio > eArc mode > Auto Audio > Digital audio out > Auto 1 Audio > Dolby Digital Plus output > Dolby Digital Plus Audio > Pass through mode > AutoHDMI Cables are High Wings 8K UHD - https://www.amazon.com/dp/B08KSY32VR Has anyone else experienced this type of issue with the Gen 2?Thanks,Kevin

14
Y
21 days ago
M
MurasgulAvid Contributor I
posted in Home theater

LG - sonos arc occasionally no sound

Hi everyone, so I still have an issue with my LG C2 in combination with my Sonos arc. The arc occasionally stops playing sound. Before it only happened after switching from HDMI source (with Dolby enabled ps5 or Xbox) back to an internal app like YouTube. Problem is solved by changing the sound source on the tv (hdmi to tv speaker to hdmi). But now I’m surprised that even when I watch a tv show on the internal app of the tv itself, it still happens occasionally. When I’m watching a tv show in stereo or 5.1, when the next episode is loaded after the one I was watching was finished , there is no sound. The same trick as before solves the issue. The HDMI inputs have never been turned on in this case. All my setting are correct. I use passthrough and eArc. I have read every topic here and Reddit but couldn’t find a solution. Sonos sends me to LG and LG tells me silly thing like turning of auto power sync etc. Doesn’t solve the issue. Anyone else having this problem? If not, I’m starting to

7
M
22 days ago
D
dmoran15Contributor I
asked in Home theater

Sonos Beam Gen1 and eARC with TCL 55P638K

Hi, I just changed my Sonos Beam from a Samsung TV ( sorry forget the model ) where the Beam worked seamlessly in that I could use Alexa to adjust volume on the TV etc. I moved the Beam to another property on a TCL 55P638K that has eARC. When I connect in the HDMI cable to the eARC port on the TV and then into the Beam and try to do the setup in the app it is telling me it doesn’t see a connection to an eARC port. I did a full reset of the Beam a couple of times and have also tried a Firestick in the eARC port and it is at least showing the pic and TV sound. The cable is the same cable I was using at the other property so I suspect it is not a cable issue although I do need to validate that. That said I’m fairly certain that is not the issue as I literally moved from one location to the other. Any suggestions welcome before I purchase the optical cable to HDMI adaptor and try that method ?Thanks,Dave. 

3
Corry P
22 days ago
B
Bootneck41Contributor I
asked in Home theater

LG magic remote not connecting to Playbar

I have read pretty much all the remedies on the forum on how to link the lg magic remote to the playbar via the optical output, but nothing works. I have been in touch with the SONOS help line and they have been through the procedure with me, but in the end admitted defeat and said I should speak to LG. I have tried resetting the remote for Philips, Bose and several other manufacturers. I have got to the point where I think I should get a new remote - or a new sound bar- but wondered if there were any suggestions as to what remote to buy. At the moment I have to control the sound through the Sonos app.

14
P
22 days ago
F
FixMyTVAudioContributor I
asked in Home theater

Sonos AMP no longer working with Samsung Frame TV (2022)

My Samsung Frame TV is suddenly no longer able to play audio through my Sonos AMP connected via HDMI ARC. It was working fine yesterday and had worked largely without issue for ~2 years.I have a Samsung Frame TV (2022) with the following details:Model Code: QN65LS03BDFXZA Software Version: T-PTMAKUC-1622.4, BT - SI have a Sonos AMP with this info:Sonos OS: S2 Version: 16.1.1 (build 78152020) Hardware Version: 1.24.1.17-1.2I have the Sonos AMP connected to the Samsung TV’s HDMI ARC port (HDMI 3) and have been able to play audio from the TV and a connected Apple TV device without issue for almost 2 years. It was working fine yesterday. Today the TV is no longer recognizing the Sonos AMP as an audio output option and I am limited to the built-in TV Speakers.From the Sonos App on my phone, if I go to the AMP and click on TV Setup, then click Continue, then click Connected to ARC, then click Test connection, I get an error of “CEC not connected.” In troubleshooting, I have noticed that if I

4
Corry P
22 days ago
K
KcjefffContributor I
posted in Home theater

Feature Request -DTS decoding for discs with Master Audio, DTS:X, and DTS:HD

How do I make a feature request? I love how great my surround setup sounds with Dolby Atmos, but it’s really disappointing not to have DTS decoding for discs with Master Audio, DTS:X, and DTS:HD.  I assume this is just a licensing cost decision but for the premium we pay for Sonos, I’d expect it to be supported (and did when I purchased).  Thanks

1
N
22 days ago
P
Pawalsh93Contributor I
asked in Home theater

TV connection Issue

I have had my Sonos Arc for a few years now and it has been perfect.  Today when I turned on my Tv I wasn’t getting any audio at all.  I unplugged both the Arc connection and the power for a few minutes and tried again, still nothing.  To make sure it wasn’t the speaker I tried playing music through the Sonos app.  Works great, but still not working with the TV as the source. It’s an LGCX tv.

4
P
23 days ago
M
Murray MuzzaContributor I
asked in Home theater

Era 100 dropping out while watching tv

Hi all,I’ve just connected 2 x Era 100s to my Beam (Gen 1). (In the TV room)They work perfectly for music. When I watch a tv program, the Eras intermittently drop out. Not both at the same time though, so you get this annoying left ear, right ear thing that happens when watching a show. I experienced the same problem when I tried using my Move or Roam with the Beam. They both drop out while watching tv.I ended up putting a One in place of the Move and that solved the problem.I’ve been using a Five and a One with my Beam - and I haven’t heard a ‘drop out’ while watching TV. So I figured the power cord just made the difference. I decided that the portable speakers just don’t connect that well to the Beam for tv audio. (Never had a problem when listening to music though). So, with my new Era 100s - I didn’t think I’d have the ‘drop out’ problem as they are wired to a power source. Does anyone have advice on why the Eras would be dropping out on tv audio - but not for music?Thanks. Muz

5
M
23 days ago
M
Mikey67Contributor I
posted in Home theater

Beam to older aquos sharp 70” arc TV.

My tv is older but has hdmi1 arc connection.  I’m only getting stereo pcm from any source I watch. Hulu firetv apple.  Just tried optical hdmi connector.  Still same.  I was sure it was a tv setting issue but idk.  Help!!

23
controlav
23 days ago
J
jvahContributor I
posted in Home theater

Sonos Arc with Samsung QE65QN90A TV + Apple TV

Hi everyone, I’m really considering upgrading my old Samsung soundbar to Sonos Arc (+Sub and Ones as surround speakers). When reading discussions here I stumbled upon a lot of threads regarding problems with Samsung TV’s and the Sonos Arc regarding Atmos, 5.1, sound cutting out etc. Some of the threads were quite old so I was wondering if someone with a similar setup could confirm if problems have been patched or if there are still problems with the functionality. I really wish to upgrade but at the same time I’m a little afraid to invest and then end up with the setup not working as intended… My setup would be as follows:Apple TV 4K 2nd gen—> Samsung QN90A (2021) with HDMI —> Sonos Arc with HDMI eArc Could someone comment if they still have problems with a similar setup? Thank you very much in advance!!

5
D
23 days ago
Terms & ConditionsCookie settings