Advanced setups

This is the place to troubleshoot your Sonos hacks, advanced setups, and third party integrations. Be mindful of your products warranty, and that Sonos staff can't always assist in an official capacity here.

  • 1,912 Topics
  • 12,540 Replies
D
DorianBriand
started this topic

Era 300 placement for surround

Hello everyone,I would like to have your opinion and your suggestions on the future placement of my Era 300 which I will receive shortly. I...
  • 0
  • 9
Corry P
Corry P
solved this question

Sonos and Mesh network

Hi @Bourney Welcome to the Sonos Community!I believe that system will work with your Sonos without issue, yes.Please note that when you add...
  • 0
  • 3
ratty
ratty
solved this question

Two systems on one wifi network, with only one phone controller?

As you perhaps realise, one set of speakers would need to be factory reset and then set up afresh as a ‘new system’ while the other set is t...
  • 0
  • 14

1912 Topics

A
AnnelutherContributor I
posted in Advanced setups

Poor sound quality with turntable and preamp inputs

I have a Fluance turntable connected to a Fluance preamp to a Play 5. When both input cables are plugged into the preamp, the sound quality is horrible - we can’t hear vocals at all. When we unplug either the red or the white input cables on the preamp, the sound quality improves but we’re missing a lot of base and it’s a little hollow.  We’ve changed the RCA cables and I’m going to try a different preamp. We’ve also changed the line level on the Sonos app and it didn’t help significantly. Any other suggestions??

10
A
1 year ago
L
Lewor87Contributor I
asked in Advanced setups

Adding a CD player to setup

Hello  Bit of a novice here. I currently have a Sonos amp with a pair of passive speakers wired up, a turntable, two Sonos ones and a five. I'm thinking of adding a CD player into the mix. Would I just need an RCA switch to link it up to the amp so I can just switch between the turntable and CD player? I've tried an old CD player but the sound is distorted as hell but I'm thinking that's just because it's been stored in the loft for about 7 years and probably faulty😬.  Thanks in advance

5
E
1 year ago
Senoj
SenojContributor I
posted in Advanced setups

Struggling to point music on a USB drive attached to my AirPort Extreme to my Sonos app

I am struggling placing the correct network path string from my MAC into the music library (in the Sonos wizard) to USB drive attached to my AirPort Extreme. The string I am using is as follows copied from the location in the network.   afp:// AirPort Extreme._afpovertcp._tcp.local/Music/MusicI have successfully added the same disk and library when the USB Drive is connected directly to my Mac .   

2
Senoj
1 year ago
E
ellebatxContributor I
asked in Advanced setups

Windows PC Audio Output with Sonos One Bluetooth speaker

I am trying to use my speaker (sonos one) to listen to audio from my computer.   I can connect it just fine in bluetooth - but it wont recognize it as an audio devices.  I have Lenovo PC wih windows 11 - are there known bugs with this type of connection?  (I know the speaker is pretty old)

4
jgatie
1 year ago
C
CedricMusicContributor I
asked in Advanced setups

Nest Wifi Pro and Sonos

Hello,I’ve moved to a Nest Wifi Pro mesh network. Whereas I previously didn't have any issues with the earlier Nest mesh network, I can't seem to connect my speakers wirelessly using the S2 mobile app. From the research I have done, it seems like Sonos don't like networks where the 2.4 and 5 GHz bands aren't split, like with the Nest Pro. My current solution is to use the controller app on a Windows PC, and wire the speakers. I have gotten rid of my Sonos Bridge a long time ago, but a bridge which could be accessed wirelessly to talk to wired speakers would also have been a good solution I guess. Any way, it would be nice if the setup process could be changed so the speakers can connect to a wireless networks where the bands have not been split.

5
G
1 year ago
R
RosieHPContributor I
asked in Advanced setups

One Sl + Roam with different wifi

Hi thereI’m looking at getting a multi room set up in my house.I’ve already had lengthy emails with Sonos and also my own research re: compatibility/wifi etc. I’m with Virgin and have super speedy internet (for work) so internet strength and reach around the house isn’t an issue. My problem is that are internet is dynamic (I think that’s the right term). I’ve looked into getting a mesh system however I’ve read that this could decrease my internet strength plus it feels a little out of my technical ability to set up unless someone can strongly recommend one that they know works with VM and Sonos specifically and Isn’t crazy £££s I’ve decided to go down the route of plugging one Sonos SL into my router and then having another two then on other rooms.  My question is, if I were to also get a Roam to use in the garden/bathroom would this be able to connect to the other speakers as a multi room speaker or because it’s connected to my wifi rather than the route SL it would run separately and

4
R
1 year ago
R
RonPaul21Contributor I
asked in Advanced setups

PC to projector to Beam not playing through surround speakers

I have a PC with my RTX 3090 hooked to a Benq TK700Sti. I then have the eARC returned from the projector to the Beam, Sub, and two One SL.  In the sound settings in windows, it senses that the max number of channels is 6, and also shows several supported formats, which includes Dolby digital 5.1. Additionally, I am able to go through setup and select correct correct positions and even enable the 5.1 setting. Everything seems like it should work.  The problem is that when I actually try to test the speakers, the left and right channels are the only ones that play sound. If I click on the symbol of any other channel in the testing diagram, no sound plays. Also, if I play Netflix or something, the Sonos app says it is playing in stereo PCM.  The 5.1 setup is identical for my Apple TV 4K and my PS5, and I get proper Dolby Digital 5.1 with those.  Any idea what the problem could be?

1
Corry P
1 year ago
S
Stanley0609Contributor I
asked in Advanced setups

set up

I have the Playbar and 2 0ne SLs in my living room. I have a Beam and 2 One SLs in my bedroom. I have my living room set up on my app on my phone. But I can not figure our how to get my bedroom on my phone. Speakers in bedroom all work. I go to "groups" in the app and it's not lit up and when I click "groups" it tells me that this is only for systems with multiple rooms. Can anyone help me? Because I am planning on getting a Sub for my living room and then in my basement, I plan on getting the Arc with a Sub to go with my 2 One SLs in my basement and want to be able to control them all from my phone if need me. TIA

2
Mr. T
1 year ago
M
MikexContributor I
asked in Advanced setups

sonos connect to external dac

I'm new to streaming and would like to know how to wire up a sonos connect to an amplifier and an external (separate) dac

1
Corry P
1 year ago
F
firstnamemillsContributor II
asked in Advanced setups

Port + Beam + Receiver | TV Audio

My Equipment: Sonos BeamSonos PortTurntable (w/ amp)Yamaha Receiverw/ Bose bookshelf speakers (pair)My Setup:I have my TV connected to a Sonos Beam on one side of the room, and on the opposite side of the room, behind the couch/TV against the wall, I have a turntable connected to a receiver with two bookshelf speakers.  I use that setup to listen to my vinyl records and I use my Beam to watch TV and stream music digitally.My Goal: I bought the Sonos Port with the understanding that it would allow me to do both by combining the two on the Sonos network. Ideally, I’d like to connect the Port to the receiver/turntable so that I can listen to vinyl AND digital audio through the receiver’s bookshelf speakers AND Beam. Given that, I was under the impression that I would then be able to apply the same concept to TV audio, where the bookshelf speakers act like two surround sound speakers…. Is that not the case??? If so, what setup would I need to achieve this? 

3
jgatie
1 year ago
G
Glennigan56Contributor I
asked in Advanced setups

new Sonos amp on S2 app

I have an old  system on the S1 old app and want to replace my amps slowly and so I’m setting up a new amp on the s2 app.  It installs ok but I can’t see the amp in the app and no matter what I do it still doesn’t  appear.   cam both amps co exist in the sane WiFi ?  I thought they could as long as they are on the different apps.  I even installed under a different email to make sure that wasn’t causing the issue 

2
G
1 year ago
J
JonlwContributor I
asked in Advanced setups

music and tv - one sub

I have a room which is mainly used for music with 2 ‘fives’ and a sub. I have recently added a beam for the occasional use TV.I don’t want to use the five’s as surround, so keeping the music part separate. Am I better linking the sub to the beam and joining the two ‘groups’ when playing music, or leaving the sub with the five’s and just have the beam for tv use only?benefits / drawbacks of either option? thanks! 

4
J
1 year ago
S
surround5.1macContributor I
asked in Advanced setups

Beam to Mac studio

Hello,Beam (gen 2) + two Play One connected to Mac Studio via HDMI.Problem is that there is a lag in the sound when viewing Youtube, would take few mins to hear the sound, also viewing movies the sound is not in sync.would appreciate any suggestions, thanksCheers

2
S
1 year ago
D
DainiusContributor I
asked in Advanced setups

How do I set up a second system in a second home?

I want to set up second Sonos system in our vacation house, uaing same account. Where could I find a step-by-step guide to do this? And, does Sonos app recognizes aystems accordimg to WiFi I am connected to?

1
jgatie
1 year ago
P
Peter BombergContributor III
posted in Advanced setups

Can Sonos Amp or Sonos Connect be used as a stereo pair?

I don’t want to use the Sonos speakers and I have a couple places I can’t run speaker wire so I am looking to set up a Sonos Amp or a Sonos Connect as a dedicated left and a dedicated right, I know you can do this with some of the speakers but can you with a Sonos Amp or Sonos Connect?

3
Airgetlam
1 year ago
C
Crash67Avid Contributor I
posted in Advanced setups

is this a known issue with eero and sonos?

I experienced a sudden loss of my entire system (running fine for years...running on eero mesh for  about a year) that was resolved after a two hour tech call (kudos to tech “Aevo”….not an easy ticket) but resolved by doing something contrary to solutions i have read so I am asking if this is a new issue (post recent eero update) or known.  Description follows: I have a large system (14 devices) that suddenly stopped working and could not re-connect.  After routine reboots of all network components (modem, switches , eero hub), none of the devices on the system could be seen.One of my playbars was hard wired and that is the way I have run the system for years (I converted to eero mesh about a year ago and system worked fine until last night). However the playbar suddenly refused to register..  Aevo (sonos tech) and I resolved it by disconnecting the hard wired device and putting the whole system on wireless. I suspect this issue had something to do with a eero update but i am not at al

3
Ken_Griffiths
1 year ago
G
GypsycatContributor I
posted in Advanced setups

playlists

I am so incredibly confused. I own a lot of my own music stored on devices. Setting up playlists with YouTube is easy. Transferring it all to play on my two speakers set up as stereo is ridiculously confusing. The Sonos app is very UNFRIENDLY and completely bewildering. I'm not stupid. But the designers of this set up are STUPID when it comes to user interface. I welcome any advice....thanks.

3
buzz
1 year ago
F
FMAContributor I
asked in Advanced setups

trueplay unbalances the sound to the left

Hello,I have a problem with the trueplay function. I have 2 sonos play 5 gen2 in stereo and when I activate the trueplay, the sound volume is unbalanced towards the left. I have redone several calibrations. Separate the stereo. Nothing works. By deactivating trueplay everything is back to normal except the sound quality.... I have read that other users had the same problem. Any solutions to come? sincerelly

2
Ken_Griffiths
1 year ago
H
hros10Contributor I
asked in Advanced setups

connecting Sonos Ray to a TV without an optical output

Hi,I’ve seen a similar question with a suggestion of using an hdmi-to-optical adapterthe relevant pages from my tv manual: pg1, pg2, pg3 Are there any downsides to using an hdmi-to-optical adapter? latency issues? sound quality issues? Is there a recommended converter, or anything I should be aware about in the specs or just buy the cheapest converter?Lastly, the need for complex connections got me rethinking the suitability of Ray. The TV in question is in the kitchen and is not used for viewing movies, but only broadcast tv (mostly news). The TV internal speakers seem adequate, and I have a couple of Sonos One SL in the kitchen for music.My plan was to connect the Ray to the TV and move the One SL that is next to the TV to a room that does not have a Sonos speaker. This way listening to music in the kitchen would be with the Ray and the One SL, and the TV’s sound would be enhanced.Since the connection to the TV is going to be complicated, I think it would be easier (and slightly chea

11
Airgetlam
1 year ago
G
GedNzContributor I
asked in Advanced setups

2 sonos systems on one account

Hoping someone can help me here. I have a two level home with an apartment downstairs. they are on separate wifi networks. I have added devices downstairs to that network. Can I now create a system on the upstairs network and add devices to that  All under my one user account. Got me stumped, when I go upstairs and connect to  new network It tells me my system and phone are on different networks.  Which is correct!So how do I create new system for upstairs?ThanksGed

9
Corry P
1 year ago
J
jrwaldorfContributor I
asked in Advanced setups

Sonos One Won't Drop a Router

For my Sonos OneWhen I drop a router (the xFinity box) through a hard reset.Then add a router (Google Mesh)Go through the full setup - doneThen when I try to play anything on the Sonos One, it reverts to the router that I just dropped.Appreciate any guidance. 

2
P
1 year ago
M
MmccarContributor I
asked in Advanced setups

multiple connection issues since the recent update

Very disappointed.  Connection to PANDORA constantly dropping.  Using TuneIn radio is impossible.  All happening free last weeks update.   any suggestions… or perhaps acknowledgement that the app is broken would be appreciated.

1
jgatie
1 year ago
N
Nelson MinarContributor I
posted in Advanced setups

A fix for Samba and Ubuntu 22.04 / 22.10

Several folks have noticed that their Samba server stopped serving files to their Sonos v1 Music Library after upgrading to Ubuntu 22.04. After a whole lot of tinkering I found a fix:add “unix extensions = no” to the global section in the smb.conf file. That’s needed in addition to enabling SMB or NTLM v1 protocol, something that’s been necessary for a couple of years now.I have a couple of links with more info and will post them as a reply.

2
B
1 year ago
P
pierrebandoContributor I
asked in Advanced setups

surround sonos one SL buzzing when powered on

Hi,i just added two Sonos one SL and a Sub mini to my gen 2 Beam. It « works » except that when powered on, the two one SL are quite loudly buzzing constantly which is pretty unpleasant. i did a diag : 1035931804is there anything wrong with the speakers ?thanks and regards,pierre

3
Earquake
1 year ago
K
KokdjenmContributor I
posted in Advanced setups

Comment profiter du débit nécessaire pour le Dolby Atmos et DTS à partir de PC

Je possède un système Sonos (Sub + Beam 2 + 2 Sonos 1) connecté à un ordinateur de type PC sous Windows 11. La prise HDMI du PC est déjà utilisée pour la diffusion de l’image via mon vidéo projecteur. J’utilise donc la prise Optique de ce dernier pour le son. Prise optique insuffisante en terme de débit pour le dolby Atmos et le DTS. Quelle solution se présente à moi pour profiter pleinement de toutes les technologies audio ? (Ma réfexion du moment : Si la seule solution est l’acquisition d’un Sonos Amp, la revente du systeme intégrant le coût du Sonos Amp m’offre un large panel de produit)

1
Airgetlam
1 year ago
Terms & ConditionsCookie settings