Components and Architectural
Let's talk about Sonos Connect, Connect:AMP, Sonos AMP, and setups using Sonance architectural, or your own speakers and components.
- 2,116 Topics
- 16,199 Replies
Hello, I have a small issue. We have 3 amps on our system that should control 3 different areas with their own speakers.When we first set up the system the ‘Gym’ amp and speakers were on the app. However after we had some internet issues the ‘Gym’ amp/speakers now just copy whatever is being played on the ‘Reception’ amp/speakers. But as I said, the ‘Gym’ used to be it’s own individual area. It’s as if the ‘Reception’ amp now controls the speakers in the reception and the gym. But the gym should be controllable through it’s own amp. They are not ‘tied’ together (when you get 2 or more amps to play the same), it’s just the the gym has completely gone from the app, but as I said is till playing music!Any suggestions would be very appreciated!Cheers A
I have a Connect and Connect Amp. Both are connected to different mesh routers in different rooms (using Ethernet). Everything was working fine, until I installed a new mesh router a couple of days ago as the old mesh router was starting to give me problems. Now the app (Sonos S1) is able to find the Connect Amp. But is not able to find the Connect. I’ve tried to use “find missing product”, “add a new product to existing system” in setting, reset the Connect to factory setting, moved the Connect to the same room/router as the Connect Amp with no success. Any suggestion and help would be appreciated.Thanks!Sanjiv
So I recently upgraded my old connect to a Sonos Port. The port is connected to my receive and passive 5 speaker system for home theater. I however play music through it plus zone 2 are outdoor speakers. I’ve been toying with the idea of a turntable and would prefer to connect it to the existing port. At least until I get a new 5 (gen 1 currently) but I’m not doin that until I see the Optimo. I assume no issues with this but I could just plug the Line in to the port but still use it with the speakers? Not clear if it can run line in turntable (amp obviously included with turntable) and still power the receiver aspect?
I am looking to buy a SONOS Amp and have a couple of questions before taking the plunge…Firstly, I have a record player and CD player. Is there any way to connect both to the SONOS Amp as there is only one line-in connection? Can I get a spliter of some kind.andCan I use wireless headphone with the SONOS Amp?Thank youDMB
I recently upgraded my S1 Sonos system to S2 (removing two original Play:5 speakers, and adding a half dozen Ikea Symfonisk bookshelf speakers). Everything was, and still is, connected to SonosNet through a Boost wired to my router that I’ve had for some time. Everything works fine after upgrading the app and adding the new speakers, and all is still on SonosNet. To help ensure extended range and prevent dropouts, I purchased a second Boost last week to add wirelessly halfway through the house. However, I cannot get it set up. I plug it in, choose Settings: System: Add Product in the S2 app for Android, make sure Bluetooth is on on my phone, and then wait for the Boost light to turn from white to flashing green (set up) before I press the Bluetooth button on the Boost to make it change to flashing orange (connecting). The S2 app on my phone never recognizes it as it scans for products to add. I’ve tried this multiple times. The original wired boost continues to work (Sonos System Info
Hii know there have been some posts and discussions about connecting B&O speakers to TV via Sonos Port. I am looking for a simpler just strictly connecting Port to B&O Beolab 6000 speakers. And I can stream music from my phone to play on Port and my existing Arc. what cables do I need and what’s the easiest/simplest setup? TIA!
Hello. I have been having an issue with my Connect:Amp for awhile now. Every time I turn up the volume to about 65% it mutes and a white flashes on the amp. I have it wired to two pairs of Yamaha outdoor speakers with 130 watt peak power handling. One pair is located outside at my patio and the other pair is installed in my garage. To independently control the volume of the two locations I installed a Russound impedance matching volume control for each pair of speakers. I am thinking that the volume controls are what is causing the issue but not sure how to determine that for sure. Any help is appreciated.
We have a surround system in the living room comprising a Playbar, 2x Play:5s and a Sub. I realise that Line In is disabled on the Fives in this mode. However, if I buy an additional Play:Five to hook up to a turntable via its own Line In, can I still add it as a separate Room, and therefore broadcast to other speakers throughout the house? And if so, would either generation Five work?I don’t really want to go to the expense of adding a Port or Amp, but any other/better suggestions welcome! Thanks in advance (Please be kind to a newbie :-)
Hello, I have a client with two 70v in each of their restrooms that are run in series. We originally planned on using the Sonos speakers but were unaware of what’s currently there. Am I able to power 4 QSC AD-C6T speakers as shown below? Thank you in advance! I’m guessing that may run into issues with the fact that the output is stereo and that a Port is a better option but was hoping to not have to change our order. Thank you!
Hi team,I have an S1 system with a Sonos Bridge and 5 amplifiers connected to my own ceiling speakers. I am thinking of upgrading to S2. There does not appear to be a S2 bridge type of component on offer. What is the best S2 configuration to drive the exisiting speaker sets please? Am I to assume that each of the new S2 amps is also sort of a “bridge”? Do you still support a Sonos specific wireless network or do you rely on my own WiFi? Thank you very much for your support Dimitrios
I have a vintage stereo system with RCA jacks for input and output. A Yamaha CR 1020 receiver connected to a pair of JBL Century 100 speakers is what I want to hook up to the Sonos Port or other music streamer. I do not wish to upgrade any of my components, I have a Marantz 2270 still in the box as a backup. And the speakers work fine for my 68 old ears.I plan on using the RCA output of the Sonos Port to stream music to my current stereo system and using the Sonos Port RCA inputs from my system to power other Sonos speakers in other rooms of my home. I have the Sonos Port connected to my Stereo now and it sounds as good as my CD player and turntable.My question is what is the kHz and bitrate output to the RCA outputs on the Sonos Port? I think the digital outputs on the Sonos Port are 24-bit/44.1kHz. Does anybody know if the RCA outputs are the same?
proposed setup below - can you advise on how to make this happenroom dimensions 6.49m x 3.71m (24sqm) - TV half way on 6.49m wallhead height for watching TV about 1m - soundbar to be positioned on TV at about 1m heightTV LG arc hdmigoing for sonos beam gen 2 as not needing upward firing speakers skyQ box considering an hdfury arc to earc adaptor - are other models available??assume i purchase adaptor, what make and length of hdmi cables should i consider.How will the SKy Q box be connetced
I’m ignorant when it comes to sound and may have purchased the wrong thing. I have a Fluance turn table that does not have a built in preamp. I also have a Yamaha receiver is used to use to play it with in wired non-Sonos speakers. I now have two Sonos Ones I’d like to use for the turntable. Do I have the right equipment? I’ve tried to search for the right cord configuration and I cannot get it to work. Any guidance is greatly appreciated. Thanks!the back of the Yamaha is as follows.
Just started with Apple GarageBand music production software. Bummed to learn that I can’t use my Submini and pair One SLs as my “studio speakers” because of Airplay latency. If I connected the Mac Studio via HDMI to Sonos Amp to then play through to the Submini/pair One SLs, would that solve the delay problem? I’m thinking it would not, because even from the Sonos Amp, I’m then dealing with “streaming” via wifi and I’ll have the same delay.Any ideas? Thanks!
So I’ve just now started investing in Sonos but I have this home surround I want to be able to use with sonos multiroom and also maybe use as tv Audio and perhaps connect more sonos speakers to work with it … but mainly connect to sonos multiroom so I can listen to music with all my other sonos devices. What do I do? And also can I add sonos speakers to my tv setup?
Bonjour, Je possède un ensemble de composants fonctionnant sous SONOS S1, donc une télécommande CR200 qui depuis 2 semaines ne semble plus charger la batterie, j’ai acheté une batterie compatible neuve pour CR200 et cette nouvelle batterie ne charge pas non plus sur le socle de charge du CR200 J’ai tout débranché , nettoyé les contacteur , remis l’ancienne batterie , puis la nouvelle, il y a un voyant lumineux orange ou rouge qui clignote en haut à gauche du CR200 , parfois j’ai accès à la CR200 pendant quelques minutes ou heures, parfois ça ne charge pas, que ce soit avec l’ancienne batterie sonos d’origine, ou la nouvelle batterie. Merci de votre aide, je trouve cette remote CR200 toujours très pratique et fonctionnelle et qui me permet d’éviter d’allumer un téléphone, ordinateur ou tablette à chaque fois que je veux changer de musiques ou de volume de son. AngeMod Edit: Google Translate- Hello, I have a set of components running SONOS S1, so a CR200 remote control which for 2 week
I recently moved into an home that has wiring and in ceiling speakers for a multi room audio system. I’d like to be able to stream music to these speakers without going to the cabinet to turn on a receiver, etc. I was thinking a Sonos Amp looked like a good option, but I'm far from a home audio expert so i’m hoping to get recommendations from those that know. Below are the existing components the home has, would a Sonos amp have enough power to play music on both the main floor and the basement speakers? My fear is buying a Sonos amp which isnt cheap and then finding out it doesnt have the necessary power - then I’m stuck. Any help is appreciated!2 - Sonance VP60R speakers - Main Floor1 - 100 Watt Slider Volume Control, Impedance Matching - Main Floor2 - Sonance VP60R speakers - Basement1 - 100 Watt Slider Volume Control, Impedance Matching - BasementWired back to a mechanical room where there is a Episode EA-MR-HUB-1x8 distribution hub.
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.