Advanced setups

Dive into complex and advanced Sonos topics here. Got a cool Sonos 'hack' to share? Want to set up Sonos with a third party? This is the place to talk about the stuff Sonos staff can't support.

  • 113 Topics
  • 602 Replies
AjTrek1
AjTrek1
started this topic

Sonos and Mesh Networks Can Play In The Same Sandbox

HIMesh Networks do work with Sonos as long as you choose components designed to work as a Mesh. Let me explain….The PRIMARY function of a Me...
  • 7
  • 19
H
Hamzalakhany
started this topic

how to calculate how many speakers needed for outdoor space?

I am planning to get sonos speakers for outdoor area. I have a pool area and garden at a total of 5-7000 sqft. I was planning to get 1 amp w...
  • 0
  • 2

113 Topics

T
th5467Contributor I
asked in Advanced setups

Speakers don't work since adding a network switch

Have 2 Sonos Ones that have worked well wirelessly for years. I have some devices in my house I prefer to hardwire and need more ports so added a network switch to the router. Now the speakers don’t work/connect. The Sonos speakers are the only wireless devices in the house that don’t work now. Spent over an hour on phone with Sonos, restarting, removing, reconnecting, etc. No success and they were unable to help me. Said to call my internet provider for help configuring the router settings (who wants to charge for support with no guarantee of success).Any suggestions for how to configure router settings?

14
controlav
10 months ago
V
ValvequeenContributor I
asked in Advanced setups

sonos network still allowing guest access

I have Sonos and it is on its own network yet guests are now accessing my system from the guest network. If they are on Wi-Fi they can access my Sonos system. This is new and something I can’t figure out how to fix.  any help is appreciated. I have a netgear orbi system.

4
Ken_Griffiths
10 months ago
M
Martin_63Avid Contributor I
asked in Advanced setups

Is Technicolor CGA4236 compatible with Sonos?

Hello,Do you know if the router Technicolor CGA4236 should be compatible with Sonos?When I add an ethernet switch and connect a Sonos device to it the connection is disconnected. Thank you in advance. Kind regards,Martin

1
Sotiris C.
10 months ago
J
janejContributor I
asked in Advanced setups

Sonos on separate VLAN on unifi

I have read lots and lots of posts on this but many of them are old posts.  I have tried many things but still no luck.  I have my sonos boost wired to a port on my ubiguiti switch which is setup to use a separate VLAN than the rest of my network.  All my speakers are connected to the boost wireless through the Sonosnet.  After two very frustrating days of trying to get all the sonos stuff moved to the new VLAN, I finally called support.  The guy right away had me uncheck Multicast Enhancement and Multicast and Broadcast Control.  That seemed to work to get the speakers setup on the sonosnet with the boost and be visable from my iphone when on the same wireless network as the speakers.  However, if I am not on the same wireless network, the Sonos app cannot see the sonos system.  I have tried entering Firewall rules for various ports from all the threads that I have read but still nothing.  I am wondering if I have the Firewall rules setup correctly.  I am fairly new with unifi, so sti

9
J
5 months ago
AjTrek1
AjTrek1
posted in Advanced setups

Sonos and Mesh Networks Can Play In The Same Sandbox

HIMesh Networks do work with Sonos as long as you choose components designed to work as a Mesh. Let me explain….The PRIMARY function of a Mesh network is to extend the coverage of your Wi-Fi across your home wherein a single router fails to do so. A Mesh network properly configured should consist of a Primary Router (Main Node) connected to your ISP modem. If the ISP modem is a combo router/modem then it should be set to Bridge mode.The device or devices used to extend the network are called Satellites (Secondary Nodes). The nodes used to extend the network should be of the same brand/model designed to work as such for the best performance. The secondary nodes can be full blown routers themselves; but when used as secondary nodes cease to function in the same manner as the Main node. Devices of a different brand/model can be used as secondary nodes as long as they are certified for compatibility to be used as such with the brand of your Primary router/Main node. Think oranges and tange

19
S
2 months ago
IanJShaw
IanJShawAvid Contributor I
posted in Advanced setups

Wi-Fi recommendations for 20+ player setup

Question: Do I need “high end” wifi infrastructure for 21+ players? Background:I’ve been a Sonos advocate and avid user since the ZP-80 was launched in the UK.  I now have 21players spread across an old four-bedroomed property playing mostly streaming services and line-in from a turntable.I’ve lost count of the number of times I’ve switched between wired+sonos net and wi-fi installations.  Neither has been particularly stable with players regularly disappearing, playback dropping out, long pauses adding players to groups etc.A few years ago I settled on a wi-fi setup as I’d rolled out a BT Whole Home wi-fi extender setup and had good wi-fi coverage in every room and a large chunk of the garden.  Certainly everywhere I have a Sonos player.  (Also, it’s not practical to wire more than two Sonos players without the kind of upheaval I’m not really up for).All players report “Good” or “Excellent” wifi connectivity in the Sonos app.  The BT Wi-Fi discs are connected to a TP-Link Archer VR280

9
IanJShaw
10 months ago
S
Smokey RowContributor I
asked in Advanced setups

Connecting Play:1 to new wifi

Hi all. I have a Sonos Play: 1 system at my house. I recently purchased a new router (a Netgear Nighthawk C7000), and I am having trouble getting my Sonos to connect. I follow all the steps on the Sonos app, and at the end I get an error message saying there was a problem trying to connect. No other information is given. Does anyone know how to solve this issue?

3
Airgetlam
10 months ago
E
ElTytyContributor III
posted in Advanced setups

groupe

BonjourJ'ai 3 sonos era100Je veux diffuser en bluetooth sur les 3 mais je ne peux pas grouper les 3.Comment faire ? Merci

3
106rallye
10 months ago
R
RuneslothContributor I
asked in Advanced setups

network problem

My samsung phone and the Sonos system is on the same network but won't connect. A router restart will fix i but only until the next day / or if i leave and come back. Once i restart the router everything i fine, but only temporary. Ant good Ideas? Is it the phone or.router?

5
Airgetlam
10 months ago
M
mattyp11Contributor I
asked in Advanced setups

Orbi network connection issues

I’m not particularly tech savvy so apologies in advance for any confusion on my part.  I have a Netgear Orbi router with two different RBS50 satellites in my home, as well as several Sonos speakers throughout the house and a connect AMP that is wired to outdoor speakers on my back patio.  I recently set up an Orbi outdoor satellite to enhance my wifi signal outside.  At first, everything worked swimmingly and I had no issues connecting to my Sonos system while outside. However, I recently had to restart my modem + router, and ever since then the Sonos app cannot detect my system when I am outside.  I am still getting perfect wifi signal (which I assume is due to the outdoor satellite I added) but for whatever reason my Sonos system cannot be found.  Or, on occasion, it finds a couple of the indoor speakers but cannot find others, including the Connect AMP (which is particularly frustrating because that is what powers my outdoor speakers, as I noted above).  Any help in getting this iss

1
Corry P
11 months ago
J
jjensen9971Contributor I
asked in Advanced setups

SONOS ARC | LG OLED65C8PUA | Apple TV 4K (2nd generation) 2021 (A2169) - NO ATMOS

NO ATMOS SoundProducts:SONOS ARC LG OLED65C8PUA Apple TV 4K (2nd generation) 2021 (A2169)Cable setup:  ARC via HDMI cable into LG HDMI ARC input Apple TV via HDMI cable into  LG HDMI (standard) input Apple TV Settings:Audio format / Immersive Audio ATMOS setting = greyed out NOTE: LG OLED65C8PUA TV does NOT have eARC. Can I ghet ATMOS with these products?  IF YES - detail cable setup and/or Apple TV Audio settings Thank you. Moderator Note: Modified in accordance with the Community Code of Conduct.

10
E
1 year ago
D
Dashore90807Contributor I
asked in Advanced setups

Fitness room sonos setup

I would like to add additional sonos products that will allow audio output in my fitness room. Currently my setup includes arc, sub 3, 2 era 300 speakers and an port in the family room. I would like to tie in an sonos speaker and/or soundbar or other product that will allow me to play the audio from my treadmill and rower. Also to play audio from the TV and DVD player. All while being connected to the main sonos system. What would be the sonos product or products that can cover my fitness room needs. Thank you

3
melvimbe
1 year ago
Y
youn1033Contributor I
asked in Advanced setups

Sonos/Sonance Garden Series + Outdoor TV Compatibility

Hello,I have a Sonos/Sonance Indoor/Outdoor setup consisting of:Living Room - Sonance In-Ceiling Speakers + Sonos Arc Soundbar + Sonos Sub + Sonos Amp Kitchen - Sonance In-Ceiling Speakers + Sonos Amp Backyard - Sonance Garden Series 8.1 System w/ SR 2-125 AmpI have a Russound Speaker Selector and Sonos Port which allow me to combine all of the above to play the same audio in any combination (or different audio through different sources). We have an outdoor television which we would like the ability to run audio through the (SGA) Sonance Garden Series (even if we can’t tie it to the other Sonance In-Ceiling or Sonos Arc Soundbar), but have run into a number of issues. 1st off, utilizing the RCA connections and an adapter which shows on the Sonos app as a “Line-In” connection, the latency is unbearable (even after maxing out the adjustment on the TV), and when connecting it to the Sonos Port, there can only be one input connected at a time, making it impossible to toggle between the SGA

7
S
11 months ago
G
g4driverContributor I
posted in Advanced setups

Same Room...Different Sonos equipment for two setuup? One Music Only / One Video Only

I listen to music probably 80% of the time, compare to 20% watching movies or streaming video, and just trying to figure out the best way to setup my den.  I know this community has better solutions than me so I’m here asking for your thoughts and help.Current Setup:ARC + Sub-Mini (for movies)Sonos Ones Gen 1 (music only)Sonos Amp (that I haven’t hooked up and had for about 16 months till in the box)75” SamsungGen 3 Sub arrives tomorrow and my ERA 300s next week.  This setup got delayed and I should have disconnected all the Russound equipment when I bought the ARC and at least used the Sonos Amp to drive 4 speakers. Was planning to use the Sonos Amp to drive two Jamo in one wall di-pole speakers (Model SU631K4). Currently the room as no surrond speakers as I starting removing all Russound configured devices, the 7.1 Integra Stero, and all the rack mounted items which are all idle along with the Klipsch speakers in the built in cabinet. The five non-sonos speakers in this room are all

7
melvimbe
1 year ago
C
ceemohreContributor I
asked in Advanced setups

Getting setup with older turntable and amp

I’ve just gotten my dad’s old music setup and am really excited to get it all set up. He’s passed along his turntable and amp, both just over 20 years old and in great condition. The only thing I don’t have is a speaker. I’m looking to get started with the Sonos Era 300, but I wanted to see how people connect their older devices to current Sonos products. Currently, I’m thinking it’s: connect the turntable to the amp, connect the amp to my analog-to-digital converter, and connect the converter to the Sonos speaker. Is there something I’m missing? I’m really not looking to replace anything; I just want to be sure I have the right pieces to press play and enjoy some music. 

1
bockersjv
1 year ago
D
DraddyContributor I
asked in Advanced setups

what happens if I wire in only 5 speakers to an Amp?

Hello! My outdoor space has an amp and 4 Sonos architectural/outdoor speakers installed.  I really need just one more speaker, but 6 would be too much (from a visual/ symmetry perspective)  I know an amp can drive 6 architectural / Sonos speakers, but what happens if I only plug in 5? Does that create an imbalance issue with the ohm load? Thanks!

3
Stanley_4
1 year ago
B
Bmw330racerContributor I
asked in Advanced setups

Add Additional Speaker

Hi. I have an Arc, Sub and 2 One surrounds.  Sometimes when watching TV I am in my kitchen and would like to know if I can add another speaker that would play the entire audio track so that I can hear the sound from what is on TV better without having to turn up the overall volume too much.Thanks!Marc

2
Airgetlam
1 year ago
J
joness6Contributor I
asked in Advanced setups

S1 and S2 Systems Concurrently

I was an early Sonos adopter and have a perfectly functioning system including a number of original Play 5 devices. As a result, I have never upgraded to the S2 operating system. I would now very much like to buy a Beam Gen2, but see that that requires S2.  However, having set the beam up, i hope that I would actually need to control it with anything other than the to standard remote control.  considering this, is it possible to continue running my S1 system in the house, but set up the beam to run independently as a to speaker only?Thank in advance of any advice you can provide..   

3
J
1 year ago
D
Ducks vs WombatsContributor I
asked in Advanced setups

Sonos system using 400 megabytes of bandwidth

Seriously, 400 MB, according to speed tests. I am getting gigabyte scale fiber optic Internet from CenturyLink, but the huge draw of the Sonos system is causing dropout when the fiber bandwidth dips.System: 4 sonos 1s, 2 sonos 5s, 1 sonos move. Streaming mp3s from Airplay on my Mac Mini M1 desktop.The Internet suggested changing the Wi-Fi channel that the Sonos operates on, but in my android control app, it only lists one channel (11), and there's no option to change it.What is going on here?

2
Ken_Griffiths
1 year ago
P
PhaTeaContributor I
asked in Advanced setups

verizon 5g wireless internet

I just switched to Verizon wireless 5g ultra (not fios) and now can not get my sonos one (gen 2) or play bar to connect to wifi.  Can anyone help?

1
Ken_Griffiths
1 year ago
K
kickmeContributor I
asked in Advanced setups

Routeur ASUS GT-AX11000 pro

hi i just acquired asus router GT-AX11000 pro and i can’t connect my playbar, sub or play:1 with it.https://support.sonos.com/fr-fr/article/asus-rt-and-ax-series-compatibility not work 2.4 /5ghz agregate or separatlywhen i try to connect sonos products i just have message “sonos can’t join”.on my FAI box no issues. any suggestions ?thanks.  

1
Ken_Griffiths
1 year ago
H
HamzalakhanyContributor III
posted in Advanced setups

how to calculate how many speakers needed for outdoor space?

I am planning to get sonos speakers for outdoor area. I have a pool area and garden at a total of 5-7000 sqft. I was planning to get 1 amp with 3 pairs of sonos architectural sonance outdoor speakers and a 6.1 sonance garden series with sonos amp.  how should I calculate if that is enough or not? Is there a thumb rule to calculate? 

2
F
5 months ago
A
anim8rixContributor II
asked in Advanced setups

Ethernet wired Connection vs WIFI

I’m wondering how much of a difference it makes to connect some or all of my Sonos Speakers via ethernet instead of connecting over Wifi (for reference, I have an Eero mesh network that supports WIFI 6). It will take me some work to run cables to where my speakers are which is why I want to hear people’s opinions before making the effort. My reasons for asking are 1) I have a record player going to a latest gen Five and would like to stream to the rest of the apartment without echos. 2) Same issue with an arc when I’m watching/listening to TV through HDMI input (i.e. I want to hear the TV in my bedroom while doing chores). The apartment isn’t separated enough such that when there is a delay from one speaker to the next you will often here the echo. If you use ethernet, do you get any lower delay options in the app vs when connected via WIFI?  Another question (and I assume this isn’t possible but would be nice if Sonos would allow it)… is there a way to connect two speakers together wi

3
UKMedia
1 year ago
F
FloydianChemistContributor I
asked in Advanced setups

Sonos Port with NAS Drive - any additional subscriptions/kit required?

Hello,I think I know the answer to this but I’m just wanting to be very sure before making an expensive decision. I currently have a very 1990’s hifi system - CD player, amp, passive speakers. I love this but want to be able to play my large digital stored music library too. So I think I have settled on using a NAS drive with a Sonos Port, which I’ll then hardwire to my amplifier, but also have some Sonos speakers around the house too. This way, I can still run my CD player and TV into my amplifier (something which is more of a problem if using e.g. a Brennan B3 due to lack of line-out!).Anyway, with regards to a NAS drive - I just want to check if all I will need to pay for/add to my system is the NAS drive (enclosure plus HDD’s of course) and the Sonos equipment. Am I right in thinking the free Sonos app will access the NAS and provide the interface to browse through the music stored on it? Or will I also need to use e.g. Plex (either free or paid subscription). From what I’ve gather

3
F
1 year ago
S
SteveB118Contributor I
posted in Advanced setups

mobile WIFI -EE

Does anyone know if my Sonos products. IE playbar play ones and sub will work on a mobile wifi instead of getting broadband. I’m looking at the pay as you go EE  wifi things. Moving house soon and don’t want to be tied in a contract. Your feedback will be much appreciated. Steve

8
J
1 year ago
Terms & ConditionsCookie settings