Components and Architectural

Get help with Sonos Connect, Connect:AMP, Sonos AMP, and setups using Sonance architectural, or your own speakers and components.

  • 4,442 Topics
  • 25,396 Replies
Stanley_4
Stanley_4
solved this question

Sonos Port 12V trigger input

@Jamie A I think they are asking about the trigger cable, not audio.I haven’t used one since I scrapped my ZonePlayer but I think it was a 3...
  • 0
  • 9

4442 Topics

S
stadbContributor I
asked in Components and Architectural

Connecting old hifi components to Sonos (via Port?)

I am about to ressurect my old hifi system (turntable, CD player, amplifier, passive speakers) in one of my rooms. I have Sonos components in the other rooms of the house. I’d like to be able to:continue to play music from my turntable and CD player through my old amplifier and speakers stream music from Sonos to my old amplifier and speakers send music from my turntable and CD player to the Sonos components in other roomsThe amplifier (Mission Cyrus 1) has inputs: phono, CD player, aux, video, tape; and a tape output.Reading around, I think what I need to buy is a Sonos Port, and connect it as follows:Leave turntable and CD player, and passive speakers, connected to amplifier as before Connect Port IN to amplifier tape out Connect Port OUT to amplifier tape inputI then select tape input on the amplifier if I want to stream through my old amplifier and speakers. To send music from turntable or CD player to my other Sonos components, I select the appropriate input on my amplifier, selec

9
R
5 months ago
P
PiGiContributor I
posted in Components and Architectural

New App. Can't connect to system

Updated to 80.00. Can’t connect to my system (1 Play:1 two Play:3 in stereo; Boost; iPhone 15; iPad pro). Resetted everything and reinstalling. Initially worked, but after a while couldn’t connect anymore. Very disappointed. My system can’t play now.

1
Airgetlam
3 hours ago
W
Willbot79Contributor I
asked in Components and Architectural

Sonos amp

Hey Everyone, Sonos !Just updated app on iPhone 15 pro max to version 80.00.00.I have a sonos amp s2 with third party passive speakers and sub.Worked a treat before I updated today. My problem is that when I go into adjust sub audio/level it does not respond..what so ever.Toggle on/off… no difference with sub audio. It worked great prior to update, I have Jensen floor standing speakers with a 8 inch Yamaha sub (rca).Have tried everything. Any solutions ?Thanks in advance

1
Airgetlam
3 hours ago
E
EndremuContributor I
asked in Components and Architectural

How to connect 6 speskers to amp

Hello!How do I Connect 6 speskers to one amp? The banana plug seems to small to attach 3 cords each… 2.5 cord dimension

2
Airgetlam
3 hours ago
B
britcowboyEnthusiast II
posted in Components and Architectural

Sonos is forcing people to buy new hardware as they've broken the Connect:Amp and they refuse to fix it

Hi, I'm recreating this thread, as the discussion wasn't finished, but it was locked. I also wanted to make it obvious this is a Sonos issue, not a client environment issue. https://en.community.sonos.com/components-and-architectural-228999/connect-amp-keeps-dropping-out-audio-6885634/index2.html I've been following this for a while because I've been having the same issues, and when I spoke to support they said the connect amp can't cope with modern software and that I should upgrade to the amp, which is clearly unacceptable. This has been confirmed by people in that original thread who have been told the same thing. BillJanzen“FWIW, these issues seem to have occured after the June 2023 software update to S2 version 15.5. Interestingly, there is an alert posted in the release notes of the 15.6 update released July 25, 2023 about adjusting how older Sonos products use their internal memory. See below (copied from https://support.sonos.com/en-ca/article/release-notes-for-sonos-s2):  Aler

246
K
11 hours ago
S
ShapesContributor I
asked in Components and Architectural

sonos connect glitching

My Sonos connect has been operating without any issue now no matter the audio source, the music is glitching like a scratched cd. I have tried changing my modem channel and the Sonos channel like the wifi interference advise but still no change.

10
S
13 hours ago
R
Rojo1971Contributor I
asked in Components and Architectural

Can I connect Speakers on Bridge mode on Sonos Amp?? For example for a Subwoofer?

Can I connect Speakers on Bridge mode on Sonos Amp?? For example for a Subwoofer to get more power?

4
Stanley_4
15 hours ago
M
MikiHContributor II
asked in Components and Architectural

Is a minimum system possible with Port and two One's?

Is it possible to listen to Apple Music with a set of Port and 2 One’s only?  

6
M
1 day ago
R
RedEndContributor I
posted in Components and Architectural

Is there a product enhancement roadmap - why should i invest more in the product if i cant see the future?

Have just spent many thousands of dollars on a full home SONOS setup?Many said it was simpler and easier… however is it better ?  Multiple ARCs , AMPs , Subs and 8 pairs of high end 8 inch speakers. I have kept my previous full multi-room, multi-source home audio solution. The best thing i did was not to throw it out.Have managed to setup the two side by side throughout the house, the sound quality of the SONOS when trying to drive the new speakers is noticeably poorer compared to the previous 10 year old solution i was looking to replace/upgrade.So the question begs with a software driven solution. When will you be upgrading and improving? This is after all one of the main advantaged of been software and app driven. Should I continue to invest in the product suite…. your call !   

8
106rallye
2 days ago
J
J123456Contributor I
asked in Components and Architectural

Sonance In Ceiling Speakers

Is it only the 6.5" version of these that can be pivoted

4
J
2 days ago
P
plHammerContributor I
asked in Components and Architectural

In-Ceiling Speaker Placement

Hello, I have a new single story ranch home that I want to equip with in ceiling Sonos speakers. Looking for some guidance on 6” or 8” and what is the optimal number of speakers + placement in order to cover the living room, kitchen area, sunroom, and all 3 bedrooms.  For the living room I already have Sonos Arc, sub, and 2 One SLs (might need to move these to another room for lack of where to place cleanly without cables showing).I appreciate all suggestions!  

2
Airgetlam
3 days ago
M
mcloveaudioContributor I
asked in Components and Architectural

How can I connect Sonos Port to Crown XTI 4002 amplifier?

I heard it is possible but I just do not know how even with googling. Can someone please help me how I can connect a Sonos Port to Crown XTI 4002 Amplifier? The amplifier only has Speakon connections and XLR connections and connections for banana plugs.   

3
M
3 days ago
A
ACOK123Contributor I
asked in Components and Architectural

Sonos Amp Won’t Power On

My Sonos Amp won’t power on. I have 4 amps and the other 3 are working but my 4th won’t power on. I have unplugged and let sit for a while and tried it again but no luck. I used a power cord from working amp and still wouldn’t power on. I tried holding the back button while unplugging and plugging back in and still no power. Need help!

2
A
3 days ago
J
JohnXContributor I
asked in Components and Architectural

Sonance outdoor speaker Keep blowing

I have a sonos amp connected to Sonance outdoor speakers.  The speakers have both stopped working (only the tweater is working on each speaker). This is the second time in two years that the sonance speakers stopped working.   1. I have reset the amp2. Checked wiring3. Had sonos customer service perform diagnostics over the phone (listening to speaker).  He said the amp is working properly, this is a speaker issue.4.  I talked to Sonance customer service.  He said that the speakers are definitely blown.  He said this is NOT a common problem they see (and they put tons of them in marine environments).  He said that he thinks this is a sonos amp problem and while sonos amps can over power these speakers, properly functioning ones should not.  So, below is a review of my system. The outside zone consists of one sonos amp powered through a surge protector, 30 feet of 16-4AWG, Oxygen free, CL3 and burial rated wire to each speaker with only the black and red leads connected. The speakers ar

2
Stanley_4
4 days ago
A
AliInPhxContributor I
asked in Components and Architectural

In-Ceiling Speakers - No amp

Does SONOS have in-ceiling speakers that connect wirelessly and can be paired?  Would be easier than trying to run cable from the ceiling location back to an amp over 40’ away.  This would need a local AC supply to keep it charged in the ceiling, but I can’t seem to find a product like this on the website.

6
buzz
4 days ago
T
Tbonew7Contributor I
asked in Components and Architectural

Sub & Amp set up

I have a Sonus sound bar linked to the Arc on the TV.I have now got a Sonus Amp which needs adding to the system and the amp is going power the rear surround speakers.A few questions.What is the best way to wire the sound bar and the Amp? TV only has 1 x ArC connection? (I can get HDMI to both the sound bar and the Amp.)Once the above is confirmed is it a case of configuring the system on the Amp?Regards,Tony 

1
jgatie
5 days ago
B
Big Bull
asked in Components and Architectural

Connect Amp keeps dropping out audio

Hi I have 4 Connect Amps that have been working fine for some years but just recently they are dropping the Audio for a few seconds which is very annoying. I have spoken to Sonos Support on a few occasions and done everything they have suggested to fix this which they say is WiFi Interference such as switching channels etc but still have problems. This happens on any music source but I have noticed when the speakers go silent the sound levels are still going up and down on the app as if its playing the audio in other words not muted, not sure if this helps identify the problem. I am getting to the point now where soon these will be removed as they just aren't worth the hassle. I have seen a few threads where people have had the same problem but the only answers I have seen are contact Sonos Support.Has anyone had this problem and got a viable solution??????Some posts suggest an issue with S2 being introduced so does anyone know if this is a problem??

95
106rallye
6 days ago
L
Lo38Contributor I
posted in Components and Architectural

renseignements

Bonjour aux utilisateurs français de produits Sonos j’aimerais acheter une platine vinyle et aussi ressortir mes ce donc acheter également un lecteur cd. Quelle est la meilleure solution de configuration , acheter le sonos port? Comment relier tout ça ? Merci pour vos réponses Laurent  Moderator Note: Added Translation by Google Translate- Good morningto French users of Sonos productsI would like to buy a vinyl turntable and also take out my CDs so also buy a CD player. What is the best configuration solution, buy the sonos port? How to connect all of this? Thank you for your answersLaurent

1
Airgetlam
6 days ago
D
DjchebaContributor I
asked in Components and Architectural

Truplay Compatibility passive speakers

What is the best Trueplay-compatible passive in-wall speaker?

1
Schlumpf
6 days ago
B
BuggameContributor I
posted in Components and Architectural

Connect Amp - line out mod (can/has it been done)

I have a few Connect Amps. I would like the flexibility to use them simply as Connect modules. Has any done a mod to take line out connects from the unit? TIA

5
Stanley_4
6 days ago
D
DrewsaContributor I
posted in Components and Architectural

Eversolo DMP 8 connection to SONOS AMP?

Hi - I noticed a small chat on this topic, however I’m not sure what the outcome / solution was? Has anyone successfully connected the EVERSOLO DMP A8 Music Streamer / DAC / Pre-Amp to a SONOS AMP either via HDMI or other outputs from the DMP A8 to the Sonos AMP? Please help…I can’t be the only one wondering about this? Thanks. 

13
D
7 days ago
E
Echobase47Contributor I
asked in Components and Architectural

Questions about Port + Turntables and Amp

Hello: I’m trying to understand if connecting a pre-amp powered turntable to a port will enable me to play vinyl across my current system. Entertainment roomArc Amp (aux disabled) 2 pair Sonance in ceiling speakers connected to Amp as surrounds.  1st gen sub3 other RoomsSonos Play:1i had to disable my Amp’s aux port for surround to my ceiling speakers, and am curious if hooking a turntable up to a port and connecting that to my system will deliver sounds across this system and other rooms. sorry if this has been answered. 

1
Stanley_4
7 days ago
C
CHIZZLETrending Lyricist I
posted in Components and Architectural

Sonance architectural

Just hooked up a Sonos Amp with a couple Sonance architectural ceiling speakers. Sounds like absolute garbage. I had an am/fm alarm clock back in the 80’s that sounded better. What gives?

26
buzz
8 days ago
B
BayHawkesContributor I
asked in Components and Architectural

need a set up for living room and patio

Hello!  I need Sonos suggestions for the following requirements.Music for my living room that opens into a patio and pool.  So, i need to play music in my living room only sometimes, sometimes only outdoors in the patio and sometimes both.  There’s not TVs involved.So, ideally in the living room i need an amp and speakers. it’s a large space and i wouldn’t mind ceiling speaker solutions.  is a soundbar a good idea with a sub and satellite ceiling speakers?  is there a limit to how many speakers i can add?  For the patio i need weatherproof speakers for sure.  will the same amp be able to power all the speakers?Any suggestions would be appreciated.Thanks!

2
Stanley_4
8 days ago
R
Recidivist13Contributor I
asked in Components and Architectural

Issues with Denon AVR X4000 connecting to Sonos Connect

Hi, this is doing my head in, can't seem to get the Denon to push out sound to my new second hand Sonos Gen 1 stuff. I've got a Sonos connect, 2 x Play 5 (gen1) speakers. trying to hook up old Denon TT, CD, Tape and DVD deck through my denon amp to the new speakers. previously had passive speakers that worked fine. I can get turntable to play if I bypass everything and use 3.5mm jack from small pre amp and it sounds great, but I want it all to go through the AVR. Any help appreciated 

10
R
8 days ago
Terms & ConditionsCookie settings