Not sure what's the deal here. I have dolby Atmos for home theater enabled. If I select any other settings, no issue.
Sonos Beam 2 audio blips in forced atmos in windowss with LGC9
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Userlevel 7
Are you playing actual Dolby Atmos content?
Make sure the TV is set to these settings:
HDMI Input Audio Format: Bitstream
Digital Sound Output: Pass Through
eARC Support: On
![Carving it out I Badge](https://uploads-eu-west-1.insided.com/sonos-en/attachment/5c110f10-f355-4814-9f4a-4da0a0ef737f_thumb.png)
I think that's what it is, but I'll double check.
![Carving it out I Badge](https://uploads-eu-west-1.insided.com/sonos-en/attachment/5c110f10-f355-4814-9f4a-4da0a0ef737f_thumb.png)
Yes all settings are set to that already
Userlevel 7
I would only use the “Dolby Atmos for home theater” setting when playing actual Dolby Atmos content.
You can also try disabling the eARC Mode setting on the TV. It is only necessary when playing lossless audio.
![Carving it out I Badge](https://uploads-eu-west-1.insided.com/sonos-en/attachment/5c110f10-f355-4814-9f4a-4da0a0ef737f_thumb.png)
I use Dolby Atmos for home theater at all time. C2 with arc no issues. CX with Onkyo Klipsch system, no problem.
I've used C9 with Onkyo, no problem.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.