Play:3 adequate for TSF, or Play:5?



Show first post
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

36 replies


So, I'm definitely looking to a stereo pairing of the 3s. What I'm wondering is whether or not those same 3s can be used as my stereo paired surrounds in the 5 channel (not true, of course because the Beam is only a simulated center) HT setup I have with the Beam, Sub, and stereo paired play 1s.


The bolded statement is incorrect. The beam has a dedicated center channel, same as the playbar and playbase. It's the Sonos amp that has a simulated center channel.

To answer the question though, yes, two play:3s can be used for rear surrounds in place of your current play:1s. (I would not call it a stereo pair though)


In other words, could I replace the current play 1s I'm using as surround with the paired 3s? Additionally, could a different group be created whereby the 3s could either by used by themselves for music or as the surround pair in the HT group?


No, you cannot bond a pair of speakers as surrounds (whether play:1s, play:3s, play:5s, Sonos Ones, or powered by amp) and use them as a stand alone stereo pair room. You can configure them to full stereo, along with the beam/sub for music source, just not by themselves. Of course, you can reconfigure them as a separate room, then back as surrounds as you wish, but this is a 5 minute or so task to perform.
Badge +7
Wanted to circle back with an update. Found a 3 in the used/like-new marketplace, should be delivered later this week.

Prior to its arrival, looking for additional clarification on possible configuration. As you may recall, the original contemplation involved a stereo pair of 3's versus a single 5. Believe (at least for now) I've simmered down on the 5, if for no other reason than the prohibitive cost.

So, I'm definitely looking to a stereo pairing of the 3s. What I'm wondering is whether or not those same 3s can be used as my stereo paired surrounds in the 5 channel (not true, of course because the Beam is only a simulated center) HT setup I have with the Beam, Sub, and stereo paired play 1s.

In other words, could I replace the current play 1s I'm using as surround with the paired 3s? Additionally, could a different group be created whereby the 3s could either by used by themselves for music or as the surround pair in the HT group?

Hopefully this isn't as clear as mud, not thinking very well this morning.

Cheers!
Badge +7
Was medically discharged from basic in '96, so no AAFES privileges for me. That's a great price, though. There's no shortage of used listings online since the discontinuation notice, so maybe I'll be fortunate enough in that marketplace.

Play:3 stereo pair seems to be the route I'll most likely go here.
Unfortunately, it's been 40 or so years since I had access... and we never lived on base, as my father was a contractor.

That's an impressive price, though. I wonder how many they have in stock. I bet I could sell them at higher prices on ebay 🙂
Userlevel 6
Badge +15

And of course, as several of us have mentioned, it's not as easy to get a second PLAY:3 these days, so that may ultimately be the deciding factor.


If you have access to the military exchanges, I still see them in the store and online at aafes.com, priced at $229
Badge +7
Makes sense, would likely check the used local marketplace if I opted for another 3. Not one for extremely low end, so if that's the selling point (mainly) of the 5, acquiring another 3 for a stereo pair might have more merit.
Well, if the choice was between a single PLAY:5, and a pair of PLAY:3s, I'd do the PLAY:3s for sure....if you could get a second PLAY:3. I much prefer separation on the stereo. I've got both speakers, and I do like the extra bass provided by the PLAY:5, but the PLAY:3s as a stereo pair in my bedroom get daily use, and I've got no complaints.

It really breaks down as to what's important to you. If you prefer more bass, then the PLAY:5 will give you that. If you prefer more separation in your stereo field, then the pair of PLAY:3s gives you that.

And of course, as several of us have mentioned, it's not as easy to get a second PLAY:3 these days, so that may ultimately be the deciding factor.
Badge +7
I fear two 5's would overtake that space, and I'm not sure I can justify the cost. That is, of course, unless there's a significant difference in sound at the lower volume register of a 5 versus the mid-volume of a 3 (or 3 stereo pair).

To be honest, I'm probably just salivating over the 5 because they sound great in a much bigger space. It's one of those "not sure I need it, but it sure would be nice to have" scenarios in which we often find ourselves, you know. 🆒

Been leaning toward the 3 stereo pair, and I'm sure I can find one reasonably priced online. But it's still not a final conclusion at this point. Anyone else have an opinion?

Thanks for the feedback, guys!
Userlevel 7
Hi spydrwebb

The Play 5 IMO will definitely fill the space however, you would get better stereo separation if you can locate another Play 3 (as suggested by melvimbe) and set them as a stereo pair. Of course two Play 5's would be the ultimate.

Another reason to consider upgrading to a single or dual Play 5's is that they are Airplay2 compatible. They are also moisture resistant. Having lived in Michigan myself I know how basements can get a bit humid in the summer unless properly ventilated. The Play 5 also has a Line-in to accommodate other stand-alone sources.

Feel free to post back with additional questions. Cheers!
Badge +7
Yes, Total Square Feet. Sorry if that led to any confusion. I'm in a builder arena and sometimes forget others may not use the same vernacular.
TSF = Total Square Feet?

Assuming that's the case, yes, I think upgrading to a play:5 is justifiable. Peronally, I'm a fan of stereo over a single mono speaker, so I'd probably look to get a used play:3 to pair with my current play:3 to fill the space.