Skip to main content
  • Community
  • Get help and assistance with your Sonos system

Get help and assistance with your Sonos system

Having trouble with your Sonos system in any way? Ask your questions here, and receive answers from other Sonos owners. The more detail you can provide, the better.

27637 Topics
D
D.Frazier24Contributor III
asked in Advanced setups
Router/Connect:Amp placement

In short, I'm building a new home and I just want to make sure that everything is done accordingly. Originally I was going to store my Fios Quantum router on the first floor with the rest of my connect amps. I've since scratched that idea and I'm planning on running cat6 from Fios ONT box to the router on the first floor, and then running a separate cat6 back to my basement where my CONNECT:AMPS will be placed and plugging it directly into only one of the amps triggering SonosNet. There will also be a separate cat6 coming from router and plugging into a 16 port unmanaged switch which will liven up the rest of the cat6 connections in the house if that changes anything. So, is it all right if my CONNECT:AMPS are down in the far corner of my basement approximately 35 feet from my router on the first floor? I also plan on having a CONNECT next to my router on the first floor which will plug into my receiver. Should I plug the CONNECT into the router as well? I will also have one more

4200
D
7 years ago
B
brombiContributor I
asked in Advanced setups
Can I use the 5ghz net instead of 2.4ghz?

I recently bought the play 3 and everything about it is amazing, well almost everything. I live in a place with a lot of different wifi networks, and the 2,4ghz network gets very crowded. It gets very laggy when I switch songs. I have 100mb/20mb internet.

57957
K
7 years ago
D
D.Frazier24Contributor III
asked in Advanced setups
Multi Room Audio Set Up Help

I'm going to try and keep this short. I'm building a house which will have 3 floors and stand at 7,000 square ft. I plan on using 3 CONNECT: AMPS, CONNECT and a PLAYBAR/SUB which will get me to 5 total zones through out the house. Two of the CONNECT: AMPS will be located with the CONNECT next to my Verizon Fios router on the first floor. My 3rd connect amp will be located on the second floor of the house with my PLAYBAR. This is how I picture the configuration, and please tell me if there is a better way to do this. FIOS ROUTER —> TP-LINK (SG-108) 8 PORT GIGABIT SWITCH (1ST FLOOR) —> 2 CONNECT: AMPS/CONNECT FIOS ROUTER —> TP-LINK (SG-105) 5 PORT GIGABIT SWITCH (2ND FLOOR) —> 1 CONNECT: AMP/PLAYBAR/SUB Will this work? Is there a better way to set this up? Both switches will provide a hardwired connection to other devices in my home as well (TV's, game systems, etc.) I'm also planning to have 2 additional wired access points throughout out the house to make up for any dea

7706
K
7 years ago
N
NVAContributor I
asked in Advanced setups
Sonos on a wired layer 3 network

If I want to connect my Sonos components with a wire, can Sonos communicate via a layer 3 network or must it be layer 2 (same subnet)

9124
N
7 years ago
S
Shawn_AVIDContributor I
asked in Advanced setups
BOOST Mode - Can you connect more then one wired Sonos device?

I started working for a home theater / home automation installation company a few months ago and we install a lot of Sonos. Sonos is a pretty solid product but, we still run into some strange network issues every once in a while. I was originally told that Sonos creates it's own wireless mesh that it uses to communicate from device to device. Now my background is in networking and I am from the school of thought that anytime you can hard wire a device instead of using WiFi you do it, to reserve the limited airspace for your mobile devices, that are not practical to have hard wired. The standard practice when setting up these sonos systems has been to usually have all of the Sonos Connects and or Connect Amps all centrally located in a network rack and distribute speaker wire to each room, usually using a set of in-wall or in-ceiling speakers. Now having several Sonos all wired to the network as well as creating their own wireless network is concerning due to the potential for a swi

49606
ratty
7 years ago
M
Mack1979Contributor II
asked in Advanced setups
Google wifi and 3rd party router

I have Sonos working fine with my existing network, and I use HomeSeer home automation to control it (things like announcing when someone unlocks the front door). The wifi is terrible in our house, so yesterday I installed Google WiFi to have the mesh network so we can seamlessly move between them. Now I cannot work out how to have both HomeSeer (running on PC on original network) accessing Sonos AND have it working from my phone (on the wireless). If I set Sonos up wirelessly it works fine, and is visible for control for my phone, but Sonos desktop and HomeSeer cannot see it. If I set Sonos up wired (original network) then Sonos desktop and HomeSeer can see it, but the Sonos app on my phone insists it doesn't exist. Google WiFi won't work in bridge mode and still have the mesh network. My phone (on the wifi) is able to connect back to my main PC (HomeSeer runs on 192.168.1.3@1000), so it looks like it is open in one direction, or has the right port-forwarding set up, but I can

958110
M
7 years ago
A
adhodgsonContributor I
posted in Advanced setups
Sonos with newer whole house wireless system

Hi Guys, I have the following setup: Living room with Playbar connected to router. Office between living room and bedroom containing 2 Play:5 speakers connected via Sonos wireless. Bedroom containing 2 Play:3 speakers connected via Sonos wireless. With this setup streaming Internet radio and Spotify through the system works but when streaming content from the TV via optical via the Play Bar, I get timeouts on the Play:3 speakers. I am wondering whether using one of the newer whole house wireless kits like the Devolo Giga Gate (I already must use a home plug wireless extender to get wireless extended through the walls of the house) would make any difference rather than using the Sonos wireless? The Giga Gate device has wired access on the other side of the bridge, which I would be using on one of the Sonos units. My thinking is that the wireless on the Giga Gate may be stronger than the wireless on the Sonos. Anyone tried to use a similar device? I also want to ge

5156
A
7 years ago
D
DaklathenContributor I
asked in Advanced setups
No sound from PC -> HDMI Receiver -> Playbar, help please

My set-up that works: PC and Wii U plugged in to my Toshiba TV which has an optical out leading to my playbar which is set-up with satellite Play:1 speakers. I only receive 2 channel stereo using this set-up, and that is the configuration my PC video card is sending to my TV. After searching around I realized I needed an HDMI switch and audio de-encoder to get surround sound to work properly (5.1) so I go a Prosumer UltraHD HDMI 3x1 Swtich with MHL/ARC/Advanced Audio. This is a de-encoder/swtich combo. http://smile.amazon.com/gp/product/B00MSAU8XO?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 Configuration that doesn't work: PC/Wii U -> HDMI Swtich -> HDMI out to TV/Optical Out to Playbar However, now that I have set it up, my PC still shows only 2.0 stereo output as my only option and NO sound is playing through my playbar. From research so far all I can surmise is that my video card is reading the EDID from the TV saying it can only output 2.0 sound since that is all the

13855
L
7 years ago
NatK
NatKContributor I
asked in Advanced setups
Sonos Play 1 New wifi Password

Help! Pretty new to Sonos. I have a Play 1 and changed my wifi password. I have standard set up. As per video clip on Sonos site I plugged in Ethernet cable and then went onto Sonos app, settings and advanced settings is not there! So cannot go any further to reset my password. Any ideas????

8267
Stuart_W
7 years ago
J
Jost L. HansenContributor III
asked in Advanced setups
3 (or more) Play:1 in one room without stereo pairing

Hi, I have 14 Play:1 hanging in a large room. Right now they all are in their own "Room" and then I have put all rooms in one group. But I would really like to have another setup: One room with 3 speakers One room with 5 speakers Three rooms with 2 speakers And then group all 5 rooms. The three rooms with 2 speakers would normally not be a problem, but when I put 2 speakers in one room they are getting stereo paired and I don't want them to be paired because they are not hanging so it makes sense to make them stereo paired. I haven't tried to put a third speaker in a room because of the stereo pairing, so I don't know what happens when I do that. Can I make the five rooms with out stereo pairing the speakers? Thanks in advance Jost

194318
V
7 years ago
P
PurplePlanContributor I
asked in Home theater
Maintain 5.1 Surround & Fill Open-concept Room with SONOS Sound?

Just set up SONOS PLAYBASE, 2x Play:1, and a Sub at one end of an open-concept living room/dining room/kitchen area of house. It rocks! Well, at that end of the space. Not so much at the middle and other end of the space. Which is the kitchen; so cooking's no fun. Any suggestions how best to fill the whole open-space with sound, while maintaining the 5.1 sound stage in the "living room" side of the space? Thanks much! ??

6732
P
7 years ago
T00LF00L
T00LF00LProdigy I
asked in Advanced setups
Will Sonos work with Luma wifi?

Luma wifi is about to be released and looks like a great product. Can Sonos and Luma both create mesh networks that work together or will there be interference? I assume they will work, right?! A wifi mesh will be on a different frequency than the Sonos mesh, right? Luma looks like the solution many of us could use if it works as effectively as Sonos does with its own mesh. Opinions? Mesh.

277230
2
7 years ago
J
Jost L. HansenContributor III
asked in Advanced setups
14 Play:1s do not start at the same time when changing songs

I have 14 Play:1s (yes, I know it's an unusual* set up :-) that don't start at the same time when I put a new song/playlist on. There's general no delay when the song shifts to next song in the same playlist, even though I've heard some of the speakers stop playing and then start playing again a few seconds later. Is it my network causing this or is it because I have 14 speakers? I read somewhere that changing the audio compression could make a difference, but should it compressed or uncompressed? (my logic says compressed, since the files are smaller then?) I have also a Sonos Boost (not connected at the moment though). Could a Boost help? Any other things I could try? In general it's not the biggest problem, but it sounds a bit weird when some of the speakers don't play a sound. But since the speakers are in cafe* we put on a song when, with a little announcement in the start, when we are going last round in the bar. And this announcement is cut off for some of the speak

5518
J
7 years ago
J
Jost L. HansenContributor III
asked in Advanced setups
Using a travel router (or "normal" router") on a wired only LAN to connect to Sonos

Hi, I have a shared Wi-Fi (where you log in with through an log in splash screen on the browser, not typing in a password) and wired only LAN. I can't use the the Wi-FI, because it's shared and I don't want anyone to be able to control the Sonos and I can't make the Sonos log on the Wi-Fi because of the browser login function). So I have to use the wired LAN, but I need WiFi to control the Sonos from my phone. In threads where people are asking for password protection for their Sonos, they are suggested to use a travel router, so they have their own wi-fi. Can I use the travel router solution for this and plug it to the wired LAN? Or can travel routers only attach them selves to a Wifi? If so would a "normal" router that can make its own wifi work? (it's first time I hear the term travel router, so I actually don't if a travel router just is a "normal" router but smaller". Bonus info: In my situation I have to use a Sonos Boost (I have 16 SONOS:1s) and that have to be wired to

10115
J
7 years ago
C
ChilliMintLabsContributor III
asked in Advanced setups
Play sound via API

Is there anyway to send a .wav file to a player remotely and make it play it?

29702
Jine
7 years ago
S
Stig_03Contributor I
posted in Advanced setups
Rear Surround Speakers Issue / Remedy

I LOVE my entire Sonos system and only have one issue. I'm watching a stream on youtube for music that definitely doesn't have surround sound.. Which is completely fine. However, I have a PLAYBAR up front, a sub and two PLAY1's as the surrounds. Its extremely annoying that because theres no surround sound, the PLAY1's do NOTHING. Why can't they just replicate what the PLAYBAR plays?? I don't care if its not surround sound but I desperately want all 3 speakers and the sub to go at once. Its so quiet without the PLAY1's. They're extremely impressive I definitely notice the minute they aren't working. My current way around this is to remove the two play ones as surround's, group them as a room of their own, then group them to the sub and PLAYBAR. This is incredibly annoying! Then as soon as the stream is done I need to go back and set up the entire surround system again to work with my xbox. Is there a different way around this is am not aware of? And yes I have put the rears as FULL s

7093
S
7 years ago
J
Joshua_14Contributor I
asked in Advanced setups
Network traffic flow and source?

I'll shortly be having two separate WAN uplinks at my house - one 4G with an associated cost per GB, and the other, uncapped ADSL. I'm load balancing with a Draytek 2925 and routing policies to decide on which uplink to use based on the source and destination IPs. My question with regards to Sonos, what is the source IP? My setup is... 1x Boost 3x Wired Connects 7x Wireless speakers (SonosNet, no Wifi), one of which is a stereo pair. I want to send Spotify streaming up the ADSL uplink, but Tidal up the 4G uplink for the sonos players. I don't want to create a policy based only on the destination, as from my phone I want to sent Tidal over the ADSL uplink (since my phone is syncing, rather than streaming, and I don't care how long it takes) Which source IPs should I use to assign the rules to assign the rules to? Am I right in thinking if I use an IP range including the boost and the wired players only, that would catch everything?

5714
J
7 years ago
B
BobbyNContributor I
posted in Advanced setups
Sonos / Echo

I'm a heavy Sonos and Echo user. I have 5 Echo's (each room) and Sonos in 5 rooms. Would be happy to help with Beta if needed.

5306
S
7 years ago
D
DarkjamziContributor I
asked in Advanced setups
Sonos Play1 and Zipato

Hi, just got started with Sonos and have a question/problem. I integrated the speaker with my Zipato home automation system, so it can play files when an event occurs. My first project was to make a doorbell. I saved an MP3 file on my network server, and when someone presses the doorbell, this should play. This works OK, until I play another song/file. Then when someone rings the doorbell, the doorbell file plus the other song/file starts to play. It seems it is building a queue, and when an event happens, instead of just playing the file, it plays that queue. The command I send is: x-file-cifs:\\My Passport\Files\Doorbell\doorbell.mp3 Any idea how I can prevent a queue forming or playing when I just want it to play 1 file? Thanks for the help!

5340
D
7 years ago
K
kdbama1Contributor I
asked in Advanced setups
Playbar and external speakers

I have a sonos playbar connected to my TV through an optical chord. The apartment I moved into has speakers built into the wall with the copper wiring. I just went to Best Buy and bought a receiver and the Sonos connect (Not connect:amp) based on the sales guys advice. I want to be able to play TV sound through the playbar and external speakers simultaneously. Is this even possible or was the Best Buy guy wrong. Do I need the connect:amp? Or is this impossible?

6682
K
7 years ago
airforceteacher
airforceteacherHeadliner I
posted in Advanced setups
Multiroom Bluetooth receiver

So, my plans are coming to fruition and I'm closing on a house next week. It's likely to be the site of many get together so plus my own relaxation times, so I want maximum flexibility on sources. I will have Sonos in every room and the pool area, so I want people who visit or come to parties to be able to connect their own devices, without downloading the sonos app. I know of and own a few Bluetooth receivers that will output via analog to an input on my receiver or on one of my Sonos Connects (I'll have three.). But, if someone connects to a Bluetooth receiver in the living room, and walks to the patio or another room, they will exceed the distance, music will break up, the champagne will stop flowing and the magic ends, etc, etc. Is there a multiroom or multiple antenna Bluetooth solution, where one receiver has a much wider range, or multiple receivers are ganged together to one output stage, similar to multiple wifi access points in an enterprise solution? Ideally, I can give

6475
Legnum Nick
7 years ago
R
rbrown3rdContributor I
posted in Advanced setups
Harmony Hub Clock Activities

I created 9 separate activities for the 9 daylight hours from 9 am to 5 pm. Each activity was created for the Harmony Hub using hourly audio files uploaded to Amazon Music and then saved as favorites on the Sonos app. I named each activity and set a start time for each hour and a stop time one minute later. Now I have a quiet meditative Tibetan gong that announces the passing of each daylight hour using my Sonos System. My problem is that if I am listening to Sonos and the hourly Harmony Activity plays, it ends and does not return to the Sonos music I was listening to. Is there a way to configure the Harmony Activity in such a way that it plays my hourly time chime and then returns to the music that was previously playing or at least restarts the previous music?

4706
R
7 years ago
A
Anonymous
asked in Advanced setups
Sonos and Samsung SmartThings Future

Hi I am building a home automation system using Samsung SmartThings, Philips Hue lights and just bought a 2 x Play 1's. I was really hopeful that the introduction of Sonos would add a lot of value, but unfortunately I'm quite disappointed. Whilst not the fault of Sonos as such; I (and many other people in the community) were hoping for a lot of power with what is considered basic functionality. For example; whilst with SmartThings I can send a single song or Text to Speech (TTS) command to play to Sonos I can't: 1. Send a song/TTS and have Sonos resume a track that's currently playing 2. There is some basic ability to resume a song but at best it will start from the beginning; most of the time it starts playing back a totally different song 3. There is no ability to dynamically create a group outside of the Sonos app. As I said; this isn't totally Sonos' fault; but there are a lot of people desperately hoping for the situation to improve. From what I hear from Samsung, they are pulling

853819
C
7 years ago
A
ant2001Contributor II
posted in Advanced setups
REST API for interacting with sonos (node.js based)

Hi I have written a node.js program that exposes a REST API for interacting with sonos. It was inspired by the program written by jishi, but it is implemented in a very different way and is not compatible with his code. It implements most features available from the controller, as well as a few that are not (such as iplayer radio on demand searching and playback). However it is not designed to be used as a replacement for the controller, but as a way to integrate sonos easily with other systems and home automation setups The code and more information on it is at https://github.com/antxxxx/sonos-swagger-api

59111
chicks
7 years ago
A
AustinsonosgigapowerContributor I
asked in Advanced setups
Trouble with AT&T gigapower router

Anyone else having a problem with AT&T Uverse Gigapower and Sonos? They use the PACE 5268ac gateway/router from Arris. The Sonos will work but it seems that the Sonos might be taking the whole network down every 2 to 3 days. Basically, things will be working normally for a few days and after a few days, everything stops working and the only fix is to reboot the Pace router. I have many Sonos devices - a few Play5's, two Playbar's, a sub, some Play3s and am Amp. I use the old Sonos Bridge for Sonosnet and the Bridge is directly connected to the Pace gateway/router. I looked up the specs of the Pace router and there is no indication that the router supports spanning tree protocol (STP). https://www.arris.com/globalassets/resources/data-sheets/5268ac.pdf Does anyone know if I'm looking in the right place as I troubleshoot the problem? Are there any workarounds? I'm planning on connecting a few more of the Sonos devices via Ethernet - specifically the Amp and one of the Playb

22657
E
7 years ago
Terms & ConditionsCookie settings