I've read conflicting conversations about this, so...
Can I get a 5.1 setup with the Sonos Playbar + Sonos Connect Amp + 3rd-party In-ceiling Passive Speakers + 3rd-party Active Subwoofer? Is it as simple as connecting the 3rd-party passive in-ceiling speakers to the speaker posts of the Connect Amp and the 3rd-party active subwoofer to the Sub Out on the same Connect Amp?
If so, will Trueplay Tuning work in this configuration?
Sonos Playbar + Sonos Connect Amp + 3rd-party In-ceiling Passive Speakers + 3rd-party Active Subwoofer in 5.1?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
No sorry, you cannot do this because the subwoofer port on a Connect:Amp is inactive when that C:A is being used for surrounds. This is not Sonos deliberately disabling it, but because surround speakers connect to the Sonos system as 'satellites' to the Playbar, which runs the show.
However, I think the new Sonos Amp will change that, and should be rolling in to the store soon. I know it no longer needs to be connected with an ethernet cable, I'm just not sure if it will feed a 3rd party subwoofer.
TruePlay tuning will not work with any non-Sonos speakers in the "room". Sonos has said that they're working with Sonance and that you'll be able to TruePlay when there are Sonance speakers connected to the Sonos Amp.
TruePlay tuning will not work with any non-Sonos speakers in the "room". Sonos has said that they're working with Sonance and that you'll be able to TruePlay when there are Sonance speakers connected to the Sonos Amp.
![Almost Famous Badge](https://uploads-eu-west-1.insided.com/sonos-en/attachment/0d3eb367-17d2-434c-9a60-cf14ab281f02_thumb.png)
What about the Sonos Playbar + Sonos Connect Amp to the 3rd-party In-ceiling Passive Speakers + Sonos Connect to the 3rd-party Active Subwoofer? Can I get a 5.1 setup with this?
![Almost Famous Badge](https://uploads-eu-west-1.insided.com/sonos-en/attachment/0d3eb367-17d2-434c-9a60-cf14ab281f02_thumb.png)
TruePlay tuning will not work with any non-Sonos speakers in the "room". Sonos has said that they're working with Sonance and that you'll be able to TruePlay when there are Sonance speakers connected to the Sonos Amp.
Woah, curious where you've read that the new Sonos Amp will allow 3rd-party speakers and a 3rd-party sub connected to the same Sonos Amp in a 5.1 setup. Do you have a link to where it says the new Amp will do this?
Also curious to know how the Sonos Amp can detect Sonance speakers vs other 3rd-party speakers.
What about the Sonos Playbar + Sonos Connect Amp to the 3rd-party In-ceiling Passive Speakers + Sonos Connect to the 3rd-party Active Subwoofer? Can I get a 5.1 setup with this?
Here is the definitive answer from Sonos staff member Ryan S, on another thread:
'The Sub can only be bonded to a single Sonos room. A single Amp or a pair of them will count as a single Sonos room, so you can't bond multiple Sonos Subs to it. If you're using a single Amp, you can bond a Sonos Sub with it, and use the subwoofer output to connect a non-Sonos subwoofer as well. I believe they'll both use the same crossover frequency settings. A Sonos Amp that is being used as the rear speakers for a home theater setup (with any Sonos player) has the subwoofer output disabled.'
'The Sub can only be bonded to a single Sonos room. A single Amp or a pair of them will count as a single Sonos room, so you can't bond multiple Sonos Subs to it. If you're using a single Amp, you can bond a Sonos Sub with it, and use the subwoofer output to connect a non-Sonos subwoofer as well. I believe they'll both use the same crossover frequency settings. A Sonos Amp that is being used as the rear speakers for a home theater setup (with any Sonos player) has the subwoofer output disabled.'
The reason for this is simple. Amps are two channel devices with a crossover to the subwoofer out. The subwoofer in a 5.1 setup is its own channel. There is no way to combine the 1 distinct sub channel with 2 distinct surround channels and route them to a 2 channel device without ruining the mastering of the soundtrack.
There you go, more information from folks smarter than me :)
If you're looking for data about the upcoming Sonos Amp, read this thread:
https://en.community.sonos.com/announcements-228985/introducing-sonos-amp-6812069
If you're looking for data about the upcoming Sonos Amp, read this thread:
https://en.community.sonos.com/announcements-228985/introducing-sonos-amp-6812069
![Almost Famous Badge](https://uploads-eu-west-1.insided.com/sonos-en/attachment/0d3eb367-17d2-434c-9a60-cf14ab281f02_thumb.png)
Are you one of the Sonos engineers or are you basing this knowledge simply from the fact that the specs and back labeling of the Connect Amp doesn't say "LFE"? If so, and that labeling is correct, then the new Sonos Amp also isn't LFE for the Sub Out. Dang...looks like I'll have to tell one of my clients that their expensive Klipsch sub is now useless and they'll have to get the Sonos Sub.
All Sonos staff are identified as such on here. None of the replies on this thread is from Sonos staff (except the bit I quoted from Ryan S).
Does anyone know if I can use a non Sonos sub connected to a Connect Amp and use is in a surround system? Not connecting anything else but the lfe channel on the Amp.
Not to my knowledge, no. There's no way to send the LFE signal to a CONNECT:AMP specifically. In a normal 5.1 system that contains a CONNECT:AMP, it is only being sent the surround signal.
What about the Sonos Playbar + Sonos Connect Amp to the 3rd-party In-ceiling Passive Speakers + Sonos Connect to the 3rd-party Active Subwoofer? Can I get a 5.1 setup with this?
That’s not necessarily true. Any sub with a built in low pass filter can connect to the component outputs. This is a pretty common feature for powered subs.
I basically have exactly the setup that he described and it works well.
AMP, CONNECT:AMP, and CONNECT are different products. It’s unfortunate that their names are similar.
With respect to CONNECT, one can send it’s output to a generic powered subwoofer and to an external generic amplifier, however CONNECT’s outputs do not include any high or low pass filters. Some generic subwoofers provide both filters, some provide only a low pass filter, while others don’t include any filters. For best overall sound, only mid and highs should be delivered to the satellite speakers while only lows are delivered to the subwoofer. Otherwise, there will be some overlap in the range covered by one or both sets of speakers.
With respect to CONNECT, one can send it’s output to a generic powered subwoofer and to an external generic amplifier, however CONNECT’s outputs do not include any high or low pass filters. Some generic subwoofers provide both filters, some provide only a low pass filter, while others don’t include any filters. For best overall sound, only mid and highs should be delivered to the satellite speakers while only lows are delivered to the subwoofer. Otherwise, there will be some overlap in the range covered by one or both sets of speakers.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.