Skip to main content
Contributor I
Dec 29, 2020 12:48 PM UTC

Restart Sonos Beam

I have set up my Beam with my Samsung tv and everything works perfectly except one thing! 
 

I have connected the Beam to the tv with HDMI arc and, as mentioned the tv sound comes through the soundbar perfectly. I also can control volume with my TV remote control. 
 

My problem is that after I turn the TV off and come back to it the next day and turn it back on to he TV reverts to using its own speakers. If I power off the Beam and then back on it reconnects and all is fine again, I don’t want to have to turn the Beam off and on every time though.

 

Have I missed something simple??

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

10 replies

buzz
Grand Maestro
Dec 29, 2020 1:50 PM UTC

Which model TV? Is there an option to turn OFF the TV’s own speakers?

Translate
Senior Virtuoso
Dec 29, 2020 1:54 PM UTC

Do you have the Beam set to TV Autoconnect?

Translate
Contributor I
Dec 29, 2020 1:58 PM UTC

TV Autoplay is selected in the app. I don’t see an option called “auto connect”

Translate
Senior Virtuoso
Dec 29, 2020 1:59 PM UTC

Sorry - I meant Autoplay. Try toggling it off and then on again. 

Translate
Contributor I
Dec 29, 2020 2:00 PM UTC

The tv automatically selects the “receiver” output for sound when the Beam is turned on. It seems to forget and reverts to its own speakers. 

Translate
Contributor I
Dec 29, 2020 2:01 PM UTC

Am trying toggling of and on and will report back. If I just turn the tv off and back on it is still connected. It only seems to disconnect if tv has been off for an extended period of time (eg. Overnight)

Translate
Contributor I
Dec 29, 2020 2:02 PM UTC

It is a Samsung tv from about 2013/14. One of their early smart TVs

Translate
Airgetlam
Dec 29, 2020 11:44 PM UTC

Check the TV for software updates, then reboot the TV by unplugging it from the wall for two minutes. 

The TV is failing to reconnect CEC clients, for some reason. It isn’t, unfortunately, something that can be fixed from the Sonos side of things. 

Translate
Bruce
buzz
Grand Maestro
Dec 30, 2020 1:42 AM UTC

then reboot the TV by unplugging it from the wall for two minutes. 

 

The “two minutes” (or more) is important because these TV’s store enough energy to keep the electronics ‘live’ for a while. If power is restored before this stored energy runs out, the set will effectively not reboot.

Translate
Airgetlam
Dec 30, 2020 2:03 AM UTC

And frankly, as buzz suggests, two minutes may not be enough, depending on the TV and the capacitors inside… but it’s probably a safe bet. If it were me, I’d figure out something else to do, like load the dishwasher while the TV a a unplugged, and give it a good ten minutes. But I’m paranoid  

It all depends on the TV. 

Translate
Bruce