Skip to main content
Flaku
Trending Lyricist I
Dec 4, 2020 8:33 AM UTC
Answered

PS5/SONOS ARC/X900. lpcm not loud enough

Lpcm sound is considerably quieter than Dolby Digital plus 5.1 or other modes, annoying

 Is that normal or not?

Or maybe work in progress?

Is lpcm the best option for my setup , gaming on ps5?

Thanks everyone for helping in advance

Peace 

Dawid

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Rowena B.
Rowena B.Answer
Retired Sonos Staff
Dec 8, 2020 8:03 PM UTC

​Hi @Flaku, 

Welcome to the Sonos community and thanks for reaching out to us. Let me share some information to help you out. 

LCPM ​is an uncompressed audio format that provides high-quality audio to our eARC supported home theater devices. It supports up to 8 channels (5.1 and 7.1 surrounds are the most common). Getting audio depends on the physical source device playing the content and the format or output must be set to one of our supported home theater audio formats. Some players and game consoles use DTS audio format which is not supported by Sonos. Some have the ability to transcode DTS into a format that Sonos supports, such as Dolby Digital 5.1. You may also check this article about unsupported audio on home theater speakers for reference.

To take a look at your Sonos system, it would be great if you can submit a diagnostic and include the confirmation number in your response. I'd appreciate it too if you can provide us the make and model of your TV so that we can look up the information.

If you need help with any other information, please be sure to let us know. We’ll wait for your reply.

Help others find useful content by clicking the like button and selecting the best answer to your question.

126 replies

Corry P
Sonos Staff
Jun 2, 2021 7:55 AM UTC

Hi @renexxxk 

If apps on your PS5 are a lot quieter than your TV apps, perhaps you should be asking Sony for a fix?

The Arc is not going to think “he’s playing it from a PS5, I think I’ll be quieter than usual”. It plays the feed it’s given. As it plays the feed from the TV apps without issue, it’s working correctly.

If the PS5 is not responsible for the lowered volume, then your TV is.

I truly do understand the frustration you’re probably feeling, but in this case there is nothing that we can do. I recommend you stick to the TV’s apps, if the PS5 doesn’t have a setting that will fix the issue.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Headliner II
Jun 2, 2021 10:04 AM UTC

Hi @renexxxk 

If apps on your PS5 are a lot quieter than your TV apps, perhaps you should be asking Sony for a fix?

The Arc is not going to think “he’s playing it from a PS5, I think I’ll be quieter than usual”. It plays the feed it’s given. As it plays the feed from the TV apps without issue, it’s working correctly.

If the PS5 is not responsible for the lowered volume, then your TV is.

I truly do understand the frustration you’re probably feeling, but in this case there is nothing that we can do. I recommend you stick to the TV’s apps, if the PS5 doesn’t have a setting that will fix the issue.

 

Maybe the issues do lie elsewhere but the sound comes from a Sonos speaker which is in the chain.

When we contact these large companies, its always 1st line support who treat you like an idiot and think its just an issue with your TV and go through all the bog standard stuff like resets and so on.

If a company like Sonos contacted Sony, they might take the issue more seriously.

i do understand that some issues do not lie with the Sonos but surely as a large company you could make an effort to work together to highlight an issue.

Translate
Corry P
Sonos Staff
Jun 2, 2021 11:17 AM UTC

Hi @ledzep1 

I understand your point, but the issue may be due to the TV not being physically able to passthrough LPCM and so it encodes it to Dolby Digital (which may include volume adjustment or dynamic compression at either the compression or decompression stages), or it could just be due to a setting on the TV. Without any details (or diagnostics) it’s impossible to determine. In most cases we recommend getting in touch with our technical support team first, so we can confirm the issue or fix it, but if an Arc works with one source correctly then it works as it should and any other issues must be induced either at the source or the TV, assuming all codecs remain the same.

However, it’s generally customer contact volumes that drive a company to implement changes. Regardless of the level of skill/knowledge of a support agent, the details of the issue are recorded for data analysis and trends are flagged, so just getting in touch and explaining the issue should be enough for this to work. If Sony (just for example) came to us and reported a compatibility issue with a combination of our and their products, but not a single customer of ours had reported any such thing, I can’t see us considering it a priority. If it was a TV model yet to be released, then I’m sure we’d work together prior to the product launch, however.

Having said that, I will see what I can do to raise this issue internally for investigation.

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Headliner II
Jun 2, 2021 11:53 AM UTC

Hi @ledzep1 

I understand your point, but the issue may be due to the TV not being physically able to passthrough LPCM and so it encodes it to Dolby Digital (which may include volume adjustment or dynamic compression at either the compression or decompression stages), or it could just be due to a setting on the TV. Without any details (or diagnostics) it’s impossible to determine. In most cases we recommend getting in touch with our technical support team first, so we can confirm the issue or fix it, but if an Arc works with one source correctly then it works as it should and any other issues must be induced either at the source or the TV, assuming all codecs remain the same.

However, it’s generally customer contact volumes that drive a company to implement changes. Regardless of the level of skill/knowledge of a support agent, the details of the issue are recorded for data analysis and trends are flagged, so just getting in touch and explaining the issue should be enough for this to work. If Sony (just for example) came to us and reported a compatibility issue with a combination of our and their products, but not a single customer of ours had reported any such thing, I can’t see us considering it a priority. If it was a TV model yet to be released, then I’m sure we’d work together prior to the product launch, however.

Having said that, I will see what I can do to raise this issue internally for investigation.

 

Thanks, Also the other recent thread I posted similar about the LPCM 7.1 output issue on LG oleds, where all 5.1 audio is output as multichannel pcm 7.1, when the devices are connected direct to an LG oled and passthrough is set on the LG

Such as Xbox series x set to uncompressed 5.1 outputs as multichannel pcm 7.1

or

Apple 4k tv all DD 5.1 audio is output as multichannel pcm 7.1 

 

Clearly an issue LGs side it seems, but I have got nowhere with them to get the issue raised and fixed, many others have same problem. Perhaps Sonos could nudge LG to investigate.

Translate
Airgetlam
Jun 2, 2021 3:42 PM UTC

Not sure Sonos has a lot of clout with LG, to be honest. Sonos doesn’t purchase their TVs in large numbers, nor is there any revenue sharing between the two companies. As he suggested, it’s likely that individual voices such as yours carry as much, if not more weight, since you’re a paying customer, and a voice that may affect other purchasers.

That being said, I suspect Sonos does pass on some level of data to them. How much it is valued is anyone’s guess. 

Translate
Bruce
Lyricist II
Jun 14, 2021 4:04 PM UTC

Hey, I just wanted to flag this since I have the luxury of owning both a PS5 and Xbox Series X, an Apple TV 4K, and a LG CX and Sony X900H. I've hooked up all items to Arc + Sub + SL Ones, and have tested Sony’s Atmos sound bar too.

It doesn’t matter which TV, or which console, but outputting to LPCM 5.1 shows up as Mutichannel PCM 7.1 in the Sonos app… and sounds noticeably softer/muted compared to Dolby bitstream.

But flip side, moving to Dolby bitstream on either device ends up resulting in some sort of audio delay. That delay seems like it’s more on the console makers; I don’t have this issue with Apple TV or either devices. And both TVs support eArc and have passthrough enabled. But Multichannel 7.1 and LPCM sound issues are clearly a Sonos issue.

Translate
Enthusiast I
Jul 28, 2021 8:09 PM UTC

It looks like the latest update has improved the 7.1 → 5.1 down-mixing issue, but the volume issue still remains.

I understand the idea that lpcm is just passed through to the dsp/amplifier without decoding, but there has to be something going on that is incorrect. I shouldn’t have to raise the volume 2x/2.5x on lpcm when compared to a dolby-encoded track. Almost to the point of the track clipping in order to output the same audible magnitude.

Translate
Enthusiast I
Aug 1, 2021 8:09 PM UTC

Hi @jkossis 

What are you basing your statement that LPCM will be quieter than Dolby Digital off of? If anything, LPCM is more likely to have greater depth/fullness/loudness, as it is a lossless format (Dolby Digital is lossy).

As I stated: 

Differing content can often be mastered to different volume levels, and when a change in encoding is involved, this is even more likely as the sound track will be adjusted to best fit the parameters and abilities of the codec. Technically, however, LPCM isn’t a codec (it’s uncompressed) and is in fact how all digital equipment handles sound internally - at some point, regardless of any formats/codecs/channels being used, everything is converted to LPCM before being passed to the digital amplifiers inside all Sonos speakers/Amps. Included in the decoding process of Dolby Digital and Atmos to LPCM is a volume boost/range compression. As LPCM isn’t processed (decompressed) like a codec, there isn’t the same opportunity for this to happen. When LPCM is played, you get the closest to the original track possible - the data on the source is relayed directly to the amplifier after mixing.

You are correct - LPCM from the source will have greater depth (dynamic range), which is exactly why it sounds quieter - there’s less compression. This has nothing to do with algorithmic data compression, but auditory dynamic range compression instead. With less compression there is a greater range in volume level between something quiet and something loud. A cinema would not dream of compressing this range, but watching movies at home is a different matter. When there is no compression, you’ll need to turn up the volume to hear quiet vocals, and then explosions are really loud - something a cinema desires, rather than tries to avoid.

I did say “in general”. There’s no technicality that says LPCM is quieter compared to other formats - I’m just saying that it’s something you’re likely to perceive, as opposed to the opposite.

 

@Corry P,

I am sorry for the delay in my response, but this doesn’t quite add up.

Perhaps for a lossy compression (Dolby Digital or Dolby Digital+) this would hold, but not for something that is losslessly compressed (Dolby TrueHD). Whether a Dolby TrueHD track is decoded at the Sonos level, at the receiver level (in a non-Sonos environment), or at a media player level, the auditory fidelity of the resulting LPCM should be 100% equivalent. The reason for a data-compressed codec like TrueHD is simply for saving disc space, but since it is lossless, the auditory dynamic range is not compressed. If Sonos is taking the liberty to add more volume boost/range compression in a Dolby TrueHD track, they are doing something beyond the intent of the codec and deocder that Dolby provides (and perhaps even the creator’s intent). Of note, this isn’t in reference to Atmos metadata. I understand that is lost in standard Dolby TrueHD → LPCM decoding. Simply talking about ear-level channels here.

tldr; Decoded Dolby TrueHD should sound 100% equivalent from a fidelity perspective, regardless of what device has done the decoding to LPCM. And right now, it does not. And it’s not close.

Translate
Corry P
Sonos Staff
Aug 2, 2021 10:11 AM UTC

Hi @jkossis 

tldr; Decoded Dolby TrueHD should sound 100% equivalent from a fidelity perspective, regardless of what device has done the decoding to LPCM. And right now, it does not. And it’s not close.

There is no reason for LPCM to sound equivalent to Dolby TrueHD - it doesn’t contain vertical channels, nor does it have Atmos 3D positioning data. What happens to those channels and that data depends entirely on which device decodes the stream to LPCM.

 

Translate
"Common sense is the collection of prejudices acquired by age eighteen." - Albert Einstein
Enthusiast I
Aug 2, 2021 12:10 PM UTC

Hi @jkossis 

tldr; Decoded Dolby TrueHD should sound 100% equivalent from a fidelity perspective, regardless of what device has done the decoding to LPCM. And right now, it does not. And it’s not close.

There is no reason for LPCM to sound equivalent to Dolby TrueHD - it doesn’t contain vertical channels, nor does it have Atmos 3D positioning data. What happens to those channels and that data depends entirely on which device decodes the stream to LPCM.

 

@Corry P

I acknowledged this in my previous reply:

Of note, this isn’t in reference to Atmos metadata. I understand that is lost in standard Dolby TrueHD → LPCM decoding. Simply talking about ear-level channels here.

I am not considering the vertical/height channels, or the Dolby Atmos 3D object positioning. Simply the conversion of the (up-to) 7.1 ear-level channels. Dolby TrueHD existed as a codec long before Dolby Atmos was born, with the later being an extension on top of the former. Take for example the movie It's A Wonderful Life. It has a Dolby TrueHD 2.0 track.

There is countless literature online detailing how when decoded, Dolby TrueHD (and DTS-HD MA for that matter) should sound equivalent from an audio and fidelity perspective to LPCM. They exist simply for saving data (not dynamic range) space on media.

I cannot stress this enough: There should be no fidelity difference between decoding at the Sonos/receiver level and decoding at the Apple TV 4K (as an example, could be another Dolby-certified decoder) level for anything without atmospheric audio.

Translate