Skip to main content
Contributor I
Dec 23, 2021 4:36 PM UTC

Make Sonos Beam bar Gen2 working with Projector Optoma EH330UST

I have a Beam bar to watch movies. I have replaced my TV by a projector (beamer) Optoma EH330UST. 

I’m not able to get the sound in the soundbar. 
The projector has (2) HDMI 1.4a, 1 with MHL 2.0 . Not sure how to make it act as a HDMI ARC. 

Or If a HDMI splitter exist to separate the image and the sound. 

 

If you have any ideas, please send them :) 

 

 

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

5 replies

ratty
Dec 23, 2021 4:39 PM UTC

You can’t ‘make an HDMI act as ARC’. It either is or isn’t.

As you surmise, you’ll need to split the audio and video. Send the audio to the Beam, the video to the projector. Get an HDFury Arcana. 

Translate
LogreenAuthor
Contributor I
Dec 26, 2021 1:25 PM UTC

Hello, 

 

Is there anything else that “HDFury Arcana“ in a lower budget but still working to split? 

Translate
ratty
Dec 26, 2021 1:32 PM UTC

Yes, you could strip the audio from the HDMI and output it over optical. Then use the Beam’s optical-HDMI adapter. There are many cheap devices which will de-embed the audio to optical.

You would however be limited to Dolby Digital 5.1 on the Beam. No DD5.1+ or Atmos.

Translate
LogreenAuthor
Contributor I
Dec 27, 2021 3:41 PM UTC

HDFury Arcana is the best solution and the easiest? 

Translate
ratty
Dec 27, 2021 3:45 PM UTC

Arcana is the most comprehensive solution and, once configured, works well. 

If you want something cheap and simple, get an HDMI extractor that outputs audio over optical.

Translate