Skip to main content

My TV is mounted on the Sanus Swivel TV Base. The metal baseplate is a tad over 1/4” thick, and I am not sure there is enough clearance under the midsection of the arc. In other words, I am worried that the baseplate might bump into the underbelly of the arc.

Check out https://www.sanus.com/en_US/products/mounts/wstv1/ and 

https://www.sanus.com/assets/products/wstv1/documents/WSTV1_TD_191014.PDF for reference.

Given the dimensions in the PDF above, what is the “underbelly clearance” in the middle 27” of the arc?

Happy Holidays!

Bruce.

Hi @press250, 

Thanks for reaching out to the Sonos community and for letting us know about your concern. Let me share with you about the Sonos Arc placement.

The Sonos Arc requires a minimum of 5.5 inches on the front and sides of it, with at least 2 inches between the backside of the Arc and the TV when in a tabletop orientation. If wall-mounting, it is recommended to have a clearance of at least 5.5 inches between the TV and Arc. You may also check this thread Arc Placement that might help you out. 

Please let me know if you have any further questions or concerns, we’ll be glad to assist you. 

Your in luck. I have the exact same set up, using a 65CX and an arc. The only advice I can give you, is ensure you have close to 20” of depth for the console that the flat panel base is sitting on.  Ps: it’s fifty bucks cheaper CDN at Costco 

Terms & ConditionsCookie settings