Skip to main content

Hi,

 

I'm sorry to bother community but there is no way to get direct feedback from Sonos on a given issue.

I'm using Spotify and it never works on Sonos system more than few hours (or days when I'm lucky).

 

I have 1 beam + surround play:1, 1 Play:3, 2 Play:1. My router is an Asus rt-ac68u with PPPOE connection from ISP (down 300M, up 50M). All Sonos products have been set with fixed IP on the Asus. Asus WiFi channel is 3 while I've tried all channels on Sonos (1,6,11. Currently it's 6). The Beam is wired with a brand new Cat7 cable. On the Asus I can connect to Spotify through my OnePlus (WiFi) or my Windows 10 (wired, cat7 cable) without any lag or issue.

 

Every time I want to use Spotify I have either “Spotify lost connection" or “cannot connect to Spotify" or “buffer is insufficient", in short it's never working smoothly . I already tried most of the given solutions given, I can't believe that it is not working while my connection is very good and my network clean.

 

Please help me. Diagnostic1311873851

Asus WiFi channel is 3 while I've tried all channels on Sonos (1,6,11. Currently it's 6).

Therein could be your problem. Channel 3 overlaps badly with channel 6, injecting interference into both. Only use ch 1, 6 or 11 -- with a 20MHz channel width. These are the (nominally) non-overlapping channel choices in the 2.4GHz band.

Asus WiFi channel is 3 while I've tried all channels on Sonos (1,6,11. Currently it's 6).

Therein could be your problem. Channel 3 overlaps badly with channel 6, injecting interference into both. Only use ch 1, 6 or 11 -- with a 20MHz channel width. These are the (nominally) non-overlapping channel choices in the 2.4GHz band.


Thank you for the advice Ratty. That didn't change the situation at all, only one song ok and then issues again.

Terms & ConditionsCookie settings