Anyone updated any idea what it does?
14.19 update
Userlevel 6
+11
Page 1 / 2
Looks like another speaker update needed even though the app hasn’t updated. Anybody know what it does?
+1
My Beam (gen1) ha perdido graves y presencia. Al principio, pensé que estaba escuchando el sonido del altavoz de un monitor delgado. ☹️
A mí me pasó lo mismo, el bajo aumentó ligeramente pero el sonido empeoró, suena encajonado
Olvidé mencionar que también el volumen ahora es más bajo incluso al 100% en mi haz gen1
It sounds like you may perhaps have an hardware issue, as the overall volume-level for the Beam should not have altered.. perhaps best to submit a System Diagnostic report and speak to the Sonos Support Staff via this LINK. I have a Beam (Gen1) setup with two Ones and a Sub-Mini and it sounds really good and certainly goes louder than I would ever need it to.. we only ever use a volume no more than 40% and less in most cases.
—
Parece que tal vez tenga un problema de hardware, ya que el nivel de volumen general del Beam no debería haberse alterado... tal vez sea mejor enviar un informe de diagnóstico del sistema y hablar con el personal de soporte de Sonos a través de este ENLACE. Tengo una configuración Beam (Gen1) con dos Ones y un Sub-Mini y suena muy bien y sin duda suena más alto de lo que nunca lo necesitaría... solo usamos un volumen de no más del 40% y menos en la mayoría de los casos.
Muchas gracias, en cuanto llegue a casa será lo primero que haré
My Beam (gen1) ha perdido graves y presencia. Al principio, pensé que estaba escuchando el sonido del altavoz de un monitor delgado. ☹️
A mí me pasó lo mismo, el bajo aumentó ligeramente pero el sonido empeoró, suena encajonado
Olvidé mencionar que también el volumen ahora es más bajo incluso al 100% en mi haz gen1
It sounds like you may perhaps have an hardware issue, as the overall volume-level for the Beam should not have altered.. perhaps best to submit a System Diagnostic report and speak to the Sonos Support Staff via this LINK. I have a Beam (Gen1) setup with two Ones and a Sub-Mini and it sounds really good and certainly goes louder than I would ever need it to.. we only ever use a volume no more than 40% and less in most cases.
—
Parece que tal vez tenga un problema de hardware, ya que el nivel de volumen general del Beam no debería haberse alterado... tal vez sea mejor enviar un informe de diagnóstico del sistema y hablar con el personal de soporte de Sonos a través de este ENLACE. Tengo una configuración Beam (Gen1) con dos Ones y un Sub-Mini y suena muy bien y sin duda suena más alto de lo que nunca lo necesitaría... solo usamos un volumen de no más del 40% y menos en la mayoría de los casos.
+1
My Beam (gen1) ha perdido graves y presencia. Al principio, pensé que estaba escuchando el sonido del altavoz de un monitor delgado. ☹️
A mí me pasó lo mismo, el bajo aumentó ligeramente pero el sonido empeoró, suena encajonado
Olvidé mencionar que también el volumen ahora es más bajo incluso al 100% en mi haz gen1
My Beam (gen1) has lost bass and presence. At first, I thought I was hearing sound from a thin monitor’s speaker. ☹️
Ok, so Ive refreshed TruePlay. More bass (a bit too boomy), less presence still. Sound is still not as good as before.
Based on the responses I decided to upgrade and agree everything sounds better.
Based on your post I bit the bullet and updated
My fives and sub for music I had to increase sub level but left eq the same sound OK
My HT setup I haven't noticed any improvement as yet but it's early days 😊
Bottom line it's not worse 👍
Concur, updated after others confirmed it was 'safe'. Sub3 does appear a little more punchy than before. Volume on Arc retained, together with the Enhanced Clarity profile, which I'm still not a fan of.
That's a shame the Arc keeps the enhanced clarity profile, guess it's here to stay for an little while at least. Wish they would just make the speech enhancement option toggle this profile on/off (off being 14.10).
I'm going to hold fire on updating for a whole yet in case any new bugs rear their head.
+1
In my case I have a beam gen1 + 2 one Sl and the sound coming from the 14.19 is not to my liking, it lost clarity and I noticed a slight increase in bass
+1
¿Alguien actualizó alguna idea de lo que hace?
En mi caso tengo un haz gen1 + 2 one Sl y el sonido proveniente del 14.19 no es de mi agrado, perdió claridad y noté un ligero aumento de graves
+1
My Beam (gen1) has lost bass and presence. At first, I thought I was hearing sound from a thin monitor’s speaker. ☹️
The same thing happened to me, the bass increased slightly but the sound got worse, it sounds boxed in
Have you submitted a system diagnostic within 10 minutes of experiencing this problem, and called Sonos Support to discuss it?
There may be information included in the diagnostic that will help Sonos pinpoint the issue and help you find a solution.
When you speak directly to the phone folks, they have tools at their disposal that will allow them to give you advice specific to your Sonos system and network.
My Beam (gen1) has lost bass and presence. At first, I thought I was hearing sound from a thin monitor’s speaker. ☹️
Based on the responses I decided to upgrade and agree everything sounds better.
Based on your post I bit the bullet and updated
My fives and sub for music I had to increase sub level but left eq the same sound OK
My HT setup I haven't noticed any improvement as yet but it's early days 😊
Bottom line it's not worse 👍
Concur, updated after others confirmed it was 'safe'. Sub3 does appear a little more punchy than before. Volume on Arc retained, together with the Enhanced Clarity profile, which I'm still not a fan of.
Userlevel 6
+11
Based on the responses I decided to upgrade and agree everything sounds better.
Based on your post I bit the bullet and updated
My fives and sub for music I had to increase sub level but left eq the same sound OK
My HT setup I haven't noticed any improvement as yet but it's early days 😊
Bottom line it's not worse 👍
Userlevel 4
+5
Based on the responses I decided to upgrade and agree everything sounds better.
Just updated to 14.19. I noticed a volume increase and Mini Sub enhancement with a profound sounding bass on a lower volume level.
It also sounds more full all the way around!
Same here, especially on PCM output, volume is now closer from Dolby digital output, it seems.
Just updated to 14.19. I noticed a volume increase and Mini Sub enhancement with a profound sounding bass on a lower volume level.
It also sounds more full all the way around!
I’m running a sub gen3 - the bass has improved and sounds more full and punchy (more “oumph”) after this update.
Anyone with beam 2 , sub 3 and 2 sls ?
Any change on this side sound wise ?
My setup consists of Beam gen1, Sub gen3 and 2x Play1 (the very first model). I noticed a increase of sub output volume. The bass felt more punchy even on low volume. I’m using standard settings (level 0 on bass, treble and sub level, and 50% volume limit) w/o Trueplay. Before sub volume was very weak even when running on 14.18 (that was supposed to fix the sub issue according to Peter Pee).
Userlevel 4
+5
Dare not update and will wait for Peter Pee’s review first 🤞🏻
14.19 does fix PC based controller volume control broken by 14.18 but did NOT fix the known zone sync progressive deterioration issue. With the 14.18 release some zones will fall out of sync after an hour or so when grouped together. Un-grouping will temporarily fix this but not for long. Escalation team has acknowledged this but NO information on when it will be addressed. 2 steps forward, one back yet again :-(
+20
It’s new, although I get a HD icon for CD quality tracks from my NAS.
Userlevel 7
+21
I see a HiRes label when play a local flac file. Is that new? Don’t remember seeing it before, although HD and HD ultra have been there for streamed music for a while.
Anyone with beam 2 , sub 3 and 2 sls ?
Any change on this side sound wise ?
Userlevel 6
+11
Just updated to 14.19. I noticed a volume increase and Mini Sub enhancement with a profound sounding bass on a lower volume level.
It also sounds more full all the way around!
I can confirm this… Sub Mini sound quality increased much for me in combination with Beam2 and OneSL Rears. Bass is more intensive and high range bass frequency is present now.
Not much use to those of us not using sub mini more concerned about the arc sound quality being affected myself
But glad it is working for you👍
Userlevel 7
+14
Just updated to 14.19. I noticed a volume increase and Mini Sub enhancement with a profound sounding bass on a lower volume level.
It also sounds more full all the way around!
I can confirm this… Sub Mini sound quality increased much for me in combination with Beam2 and OneSL Rears. Bass is more intensive and high range bass frequency is present now.
I turned off Auto-Update after last experience with 14.12. Now’ll wait till Peter Pee test it and give it go.
Page 1 / 2
Reply
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.