Working now! "the issue is that the IR signal comes from the one connect box and not the remote."
Ok I have a 2019 Q8 Samsung.  I only use the streaming interface on the tv.  There isn’t a one connect box.  How do I set up the remote to work? Â
Â
After you go through the initial remote set up you can’t try it a fourth time.  After the third time of telling it that it didn’t work it asks for the model number of your home theater system.  I put in Playbar and then go through the same three set up attempts again.Â
Â
It ridiculous to spend this much money on a sound system to have to do all of these work around a to get it to work. Â Â
Just ran into this issue after unplugging tv and soundbar due to relocating. Here's the fix for my Samsung One Remote not controlling volume, but it still showed a visual response on tv.
Instructions on Samsung TV:Go to Sources -> Universal Remote -> New Device
Select Device Type: Home Theatre System
Select Brand: Sonos
Select Home Cinema Configuration: Optical
Start "Power Test" and now hit "No" (unsuccessful) until the 2th power test, then select Yes (home theatre system turned on/off).
This was the fix for me! Hope this helps!
I FINALLY got my 2019 Q80R Samsung One remote to work my Sonos Playbar’s volume and mute functions. Similar instructtions to those above by MNS1974 with a few changes (2019 model TVs?)
Instructions on Samsung TV:
Go to Source → Universal Remote → New Device → Home Theatre SystemÂ
Select Brand: Sonos → Select/Search… This is where it gets weird - search for “Playbar” but it never worked for me when I selected “Playbar” from the list but DID when I selected “PBAR1USBLK” from lower in the list. Once selected, choose “Optical” as connection type.
Start "Power Test" and hit "No" (unsuccessful) until the 2nd power test (2019 TVs only give you 2 attempts - not 4...), there select Yes (home theatre system turned on/off), then “Done” and after that, it worked.
My Playbar was purchased new in early 2019 and is updated to current update level, so I can’t say what the difference is between “Playbar” and “PBAR1USBLK” in the list, only that “Playbar” never worked.
Â
Hopefully this will help someone. I was frustrated for months attempting to get this to work until I stumbled on the alternate “PBAR” choice.
Cheers,
C
Hi
i havs tried all of the suggestions above. The pioneer solution worked but then it stopped working a few weeks ago. I have a frame 2019 model. My connect box is in a different room so there is no line of sight. Can anyone help?
//hasse
I just went through this process many times and it does not work with my new 2019 Samsung Frame (model: QN65LS03RAFXZA). I followed af2k’s awesome workaround by pretending the soundbar is a Samsung model and setting the Sonos manually which worked perfectly.
Â
Another note: I was on a call with Samsung support and they are useless. They don’t even know how their device works and insist that the remote only uses IR for power signals and nothing else.
af2k is spot on. i just got a new 82” Samsung Q7DR. Contacted Samsung support and they told me that the TV would not control volume using an optical connection. Was coming here to post that info when I saw his instructions. Works to a T except the App Instructions are different now. But, find the Remote Control in your app and delete the old one. When it detects the new one it will find the Samsung Optical and all of a sudden, I can control the volume of the Samsung TV while using its apps.
I recently purchased a Q80T and when I setup the Beam, I didn’t have to do anything special to control the volume with the Samsung remote; it worked automatically with the Beam.  I used the Sonos app to optimize the Beam for my environment.
I have a beam and a 2016 Samsung TV.  I cannot get the two to communicate at all via the Sonos One Remote - sounds works but no volume control with the remote.  I tried the 4 times.  I tried twice.  No Beam model number.  And no Samsung One Connect, this was model was before that.  And Samsung is no help.  They just say the Beam is not compatible with Samsung.  Any help?
It worked for me only after switching off the IR-repeater setting from the Sonos app
any progress on this SONOS?
Hi folks,
Thank you for reaching out to the Sonos community. We really appreciate your time and effort in bringing this concern to us. Let me help you with this.
The following steps below will guide you to configure your Samsung One Remote to control your Sonos home theater speaker. If your TV uses an external IR emitter, make sure it’s within line of sight of your Sonos home theater speaker before you begin.
1. Go to the Home menu on the Samsung TV, scroll left, and select Sources.
2. Select Universal Remote. If this is your first time setting this up, you will be asked to set up your Universal Remote. Select Start.
3. Before we add the Sonos home theater speaker, you will first need to complete the remote set up for your cable, satellite, or Blu-ray player. Select New Device and choose the device you’re adding.
4. Once you’ve added your other devices, select New Device, then Home Theater System.
5. Type “Sonos” in the search box, select Sonos from the results, then select Optical for the input.
6. You will be asked to do a power test. Select the Power Test button. When it asks you if it worked, select Yes and then Done.
7. Go back to the Universal Remote setup menu and select one of the other input devices you've added, like a cable box or Blu-ray player. Select the other input devices and choose Use with Home Theater. Do this for all of your active inputs.
Your Samsung One Remote will now output IR and is ready to work with Sonos. Here’s a helpful video about it. Follow the steps in our article on setting up a TV remote with Sonos to finish the process.
If you experience any issues following the steps above, please contact Samsung support for further assistance with setting up the Samsung One Remote.
Please feel free to reach out in the future if you have any other questions. You're always welcome here.
Just ran into this issue after unplugging tv and soundbar due to relocating. Here's the fix for my Samsung One Remote not controlling volume, but it still showed a visual response on tv.
Instructions on Samsung TV:Go to Sources -> Universal Remote -> New Device
Select Device Type: Home Theatre System
Select Brand: Sonos
Select Home Cinema Configuration: Optical
Start "Power Test" and now hit "No" (unsuccessful) until the 2th power test, then select Yes (home theatre system turned on/off).
This was the fix for me! Hope this helps!
After searching around for longer than I want to admit, this worked the first time! Thank youÂ
The above steps (using Samsung, 4th power test etc) all worked for me, for about a week… and then turned the TV on today, remote not controlling so is. No indicator light flashing on the playbar, but does show up display on TV. Anyone have this issue, where it was once working, and then suddenly stops and can’t resolve using previously successful solution?
Hi
Quick question. Can you control volume of playbar via Samsung one remote when tv is off ?(music playing when tv is off)
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.