Using a Turntable with Sonos

Userlevel 5
Badge +3

Thinking about getting a turntable setup with your Sonos system and wondering where to start? We've got you covered.

If you're looking for a quick overview before you dive into the details below, check out the info we have over on our blog and on our website here.


Before getting started, we need to ask a simple question— Does my turntable need a phono preamp?

Although some turntables have a built-in phono preamp, most of them don’t. Turntables output their signal at phono level, which is a low, quiet signal rated in millivolts. A phono preamp converts the audio output to line level, which is a louder signal rated in volts. If your turntable does not have a built-in phono preamp, you’ll need to place one between the turntable and Sonos player.

We don’t recommend any phono preamp in particular, but we’ve heard great things about the Music Hall Mini, U-Turn Pluto, and Bellari Rolls VP 29.

Your audio receiver may have a phono input, which means you can wire the turntable directly to the receiver. To pass the analog signal along to Sonos the receiver should have a Tape/CD Out, Rec Out, or Zone 2 Out. (Note: additional configuration may be required to trigger the audio output on the receiver)

Which Sonos player do I need?

There are five Sonos players that have a line-in port— the Connect, Connect:Amp, Sonos Amp, Sonos Port, and Play:5. While all four can be used with a turntable, they each have a different application. The Connect is perfect if you already have an amplifier and a set of third-party speakers that you don't want to part with. You'll want to use a Connect:Amp or the new Sonos Amp when you already have a pair of third-party speakers but lack an amplifier. Our Play:5 is an all-in-one speaker with the amplifier and speakers all housed in a compact, solid enclosure. Now, no matter which player you plan on using, you'll have the ability to send the music to all of the other Sonos speakers around your house and at the same time. We get it, just because your collection sits in one room, that doesn't mean you have to.

For those just getting into vinyl or looking to upgrade, we now carry the Pro-Ject Essential III Phono in our online store for the US. This is a great turntable that includes a built-in phono preamp so it can be used out of the box with a Sonos Amp, Sonos Port, Play:5, Connect, or Connect:Amp right after the initial setup. We also have the newer Pro-Ject Debut Carbon Sonos Edition and some more options here. We know that Record Store Day is approaching so for those of you in the U.S. looking to upgrade your table, get a new Play:5, or both, we have a set that may interest you.

To connect the Play:5 to your turntable or phono preamp, you’ll need a 3.5mm male to RCA cable, which is more commonly referred to as an RCA y-cable. The y-cable will connect to the RCA Out on either the turntable with a built-in phono preamp (shown below) or the RCA Out of the standalone phono preamp. The 3.5mm end will then be connected to the Line-In port located on the back of the Play:5. Although they are not seen all that often, there are some phono preamps that include a 3.5mm out. In this scenario, you’ll want to use an aux cable, which is 3.5mm male to 3.5mm male.




After the Play:5 has been set up, you’ll want to make sure to tweak the line-in settings. Trust me, I know the excitement of getting a new turntable setup and the first thing you want to do is drop that needle but reviewing the details below will help save time and answer a lot of questions you may find yourself asking. These settings are available for all of the Sonos players with a Line-In connection.

To make these adjustments, we’re going to use the Sonos app on a mobile device and head to More > Settings >  System > (Play:5 name) > Line-In.

To start, you can set the Line-In Source Name. This is used to specify what kind of device is connected to the Line-In port. By default, there isn’t an option for a turntable, so I recommend setting a custom name. The source name is then what’s displayed when selecting Line-In as an option under Browse > Line- In > Turntable: Den

The Line-In Source Level is extremely important, so make sure that if you’re skimming this thread just for info on settings, pay attention to this paragraph. There are two common reasons why music can be barely audible after getting a turntable setup with Sonos. One reason, the turntable doesn’t have a built-in phono preamp (covered above) and the other is because the line-in level is set too low. The line-in level is the voltage in which the signal is going to be detected and the higher it’s set; the louder audio will be. By default, Line-In is set to level two, which isn’t very loud for a turntable. Each class of audio equipment is different and therefore the output impedance will vary from device to device, so make sure to consult your product’s manual. Ideally, you’ll want to set the line-in level to match the output of your phono preamp according to the principle of gain staging. Since most phono preamps don’t have a very high output impedance, you should be able to set line-in all the way to ten if you don’t hear the audio clipping.

The line-in voltage levels are below:

2.2V - Level 1
2.0V - Level 2
1.8V - Level 3
1.6V - Level 4
1.4V - Level 5
1.2V - Level 6
1.1V - Level 7
1.0V - Level 8
0.8V - Level 9
0.6V - Level 10

These adjustments can be made under More > Settings > System > (Play:5 name) > Line-In > Line-In Level.

The Autoplay Room setting, which is turned off by default, automatically triggers Line-In as the preferred source for audio playback in a designated room. This means that whether music is already playing or you’re just getting ready to kick back and sink into an album that, once the needle meets the groove, autoplay will take care of the rest. Additionally, when autoplay is enabled, the designated speaker will drop out of a group it may be part of unless Include Grouped Rooms is enabled.

While the autoplay feature is great, it won't be ideal if you’re dealing with a cartridge that is a bit noisy, there is trouble getting a solid ground connection, or if there are power fluctuations from the outlet being used. This can cause music to abruptly stop when streaming from an online music service or local source.





General Troubleshooting


Audio Dropouts




A simple but often-overlooked reason you may hear audio dropping or skipping is due to the turntable and speaker(s) being on the same surface. While it may be aesthetically pleasing or the only option in a tiny room, a turntable is designed to measure vibrations, so any other external vibrations may induce skipping or distort the music. Again, if keeping them on the same surface is the only option, you can use foam or other absorptive material under the turntable or speakers to help.

One of the main causes for audio dropping during playback is wireless interference. Before following the steps below, try to clean up the wireless in the area as much as possible.

Audio drops may also occur on larger systems when there are multiple rooms grouped together. When there is a large group with multiple speakers, there will be a greater strain on the wireless communication. To help mitigate that strain, there are two options:



  • Set the line-in level to 4. Using level 4 will increase the buffer size from 75ms to 500ms.
  • Adjust the audio compression. Use compressed rather than uncompressed or auto as it will increase the buffer size to 2000ms. This is found in a slightly different location, More > Settings > System > Audio Compression



No Audio


Check the connections. I know this sounds silly, but we’ve all been there. Connecting an In to an Out or just plain forgetting a connection altogether.

Use a different device. After making sure all cables are connected and seated properly, grab a device that can be used with a y or aux cable. Can you hear sound now? If yes, then there may be a setting on the turntable or phono preamp that needs to be adjusted or checked.


Speaker Placement


The subject of speaker placement is a very expansive topic, so I'm not going to go into too much of the nitty-gritty, but I still believe it's important to cover some of the basics. These are some of the best practices to make sure you'll get a great soundstage and imaging. This will also change from one Sonos speaker to another, or if you're using your own speakers with a Sonos Amp.




  • Make sure the speakers are away from the walls. Specific to Sonos, this will also help to reduce potential wireless signal loss.
  • You've gotta keep'em separated. As a general rule of thumb, place the speakers as far away from each other as the distance they'll be from where you'll be listening.
  • Keep them at ear level.



This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

237 replies

Userlevel 7

 @mdmike1 Double check your connections and make sure the 3.5 mm cable is fully inserted into the line-in port of the speaker. Also be sure to adjust the line-in Source Level and set Audio Compression to Uncompressed in the Sonos app.


Badge +1

Forgot to mention that my 3.5mm is hooked up to a Sonos 5 speaker which is connected to the rest of my Sonos system.  I have 10 different rooms with a Sonos speaker and I can play vinyl in all of the rooms if selected so it’s just the volume and the missing parts of the music that is missing.  MG

Badge +1

I just got a Fluance RT-85 and went with the Fluance external preamp since the Pluto 2 was not available until July.  Everything is hooked up correctly and I have the Line-In Voltage level  set to 10 but the volume is still not there.  I have new vinyl as well.  It cuts out the vocals for example ie certain ranges are absent or barely audible.  Any suggestions?  MG

I’m going to guess that “sounds is extremely coming” to be perhaps “quiet”?

I’d be looking at turning on the pre-amp if there is one on that turntable (from Phono to Line), and if there isn’t, adding an external pre-amp to get the phono level output from the turntable to a line level output, which is what the Sonos is expecting.

Just as a note, some turntables “hide” that switch under the platter, they’re not always on the back of the device. 

Thanks mate … Yes, the sound coming out is quite low ! ;) 
Just ordered a Phono Pre-Amp that will be connected to the turntable and the Sonos Amp. 
Thanks for the feedback

I’m going to guess that “sounds is extremely coming” to be perhaps “quiet”?

I’d be looking at turning on the pre-amp if there is one on that turntable (from Phono to Line), and if there isn’t, adding an external pre-amp to get the phono level output from the turntable to a line level output, which is what the Sonos is expecting.

Just as a note, some turntables “hide” that switch under the platter, they’re not always on the back of the device. 

Got something similar to you guys. 
Just got a Sonos Amp, Sonos One SL and a Turntable Pro-Ject …. but sounds is extremely coming out of the Sonos One SL. 

Everything works fine, it is connected, the Amp recognises it but sounds is quite low compare to Streaming.
Tried to change the Line-In and the Source Level to 10 (High) … but doesn’t seem to work. Sounds is still at 30% of what it could be.

Any Advice ? Will try to connect proper speakers to my amp and give it a try

Userlevel 1

Maybe it’s mentioned and I just didn’t see it, but to get the sound from the receiver to my Sonos Connect I needed to connect the tape out on the receiver to the audio in on the Connect (after connecting the turntable to the receiver’s turntable jacks). The connection is working fine, but if there’s a better way (or if the Sonos support article says this), please let me know.

You may need to adjust the settings for the line in. See the FAQ for more details. 

Thanks for the info, the turntable works great. Although the sound is good the volume on its highest is only about 40% of the volume when streaming. Is this normal and is there anything I can do to improve. I have a Audio Technica ATLP5X so a decent TT/pre-amp

Yes for not needing to remove the plug, but no, you’ll still need to switch from the line in to streaming in the app. It doesn’t happen automatically. 

I've read the various comments about connecting a TT with pre-amp to a Play 5 via a line in. I wish to do this and group through all Sonos speakers in the room. Will I be able to switch seamlessly between Vinyl and streaming without having to unplug TT from play 5 and change settings in the app? 

Hello everyone!

Thanks a lot for all of your messages. 

I want to connect my mk2 technics turntable (without preamp) to my son's play 1s

I have been advice to buy a Sonos, I received it yesterday. 

I have a amplifier pioneer vsx921 for my TV, can I use this one to get music from turntable to my Sonos speakers?

What kinfof connections do I need to do on amplifier, and Sonos port?

I tried to simply connect mk2 on rca in of Sonos port and I can get sound on play 1 but the sound is very very very very low even if I put at maximum sound level... 

I am completely lost here :(

Can someone help me please? 

Thanks a lot and happy new year!


Hi all, I’m wondering if I could get help with confirming what I need:

I’ve got an existing system I’m trying to integrate with my SONOS system:

  • pair of KEF Q150s
  • Onkyo TX-8020 receiver (has a Phono input and Tape out)
  • turntable (no inbuilt phono, so this would be routed to receiver’s phono input)
  • Polk HTS 10” sub (routed to receiver as well) 
  1. If I understood the article correctly, what I need is a port - correct? 

    I would use RCA cables from my receiver’s Tape out, and plug these into the inputs on the port.
  1. This will allow me to play vinyl across my SONOS system, and vice versa, i.e. stream Spotify through my KEF speakers. Is this correct? 

Thanks for your help!! 


Any Sonos device with an analog line in would work with your turntable. So a Port, an Amo, or aSonos Five would all work, from the current devices. Or a used CONNECT that is S2 capable would work as well. 

All the analog inputs are the same, the only difference is the form factor of the connection. All would sound equally good. 

Hi everyone, I’m new to this community.

As I’m getting really into vinyl, both vintage and new (something I never thought I’d ever be again), I've bought a Pro-Ject Debut Recordmaster with a built-in pre amp (plus USB). I have two Sonos Ones and a Beam.

I’m looking at the different ways of integrating my turntable into the Sonos ecosystem (and have major sticker shock!), so thinking of the cheaper solution, which is the Port. Will this give me a decent quality? 

Hoping for some good Black Friday deals! 


Userlevel 7
Badge +17

If you need a pre-amp depends on you turntable. Low volume from the turntable is a sign you could need one.

yep I have those … take it I dont need a pre amp on the turntable 

ive set it up to auto play through the Beam and surround sub etc that are in my main group 


Ive had some success using the LINE IN in the browse menu but the volume is very low so assume I need to plug in my pre amp into the mix  

Userlevel 7
Badge +17

Just to be sure. When you choose the Port in the Sonos app, you do not have the option I’ve circled in the picture above?

Or the option I’ve circled in this picture in the settings for the Port (these are the settings for my Connect, they are in Dutch, my native language):


yep followed those steps and I dont have the “groups” in the settings menu in the app … I have just updated the app 

I have added the Port into its own group but I have had no success in getting the technics deck to play through the main system 

Userlevel 7
Badge +17

And if you follow these steps:

how do you group the Port with the beam … I dont seem to have that option 


Userlevel 7
Badge +17

@Selected It should work. You connect the Port to your source and group it with the Beam.

In the Sonos app you can also choose to let it play to the Beam automatically.

ive just bought a port to join it up with a beam and surround system … seems like it doesn't work with a beam setup ???? 


is there anyway to connect my deck with the main system or is not just not possible ???

Sorry to hear that. Hope you can find a more suitable system for your needs.