No sound coming out of sonos move when connected tov Sony PS-LX310BT Turntable via bluetooth

  • 24 November 2021
  • 9 replies

I have connected my Sony PS-LX310BT Turntable via Bluetooth to Sonos Move. Both devices say they are connected yet when I play a record no sound comes out of the Sonos move speaker, please can someone help ?

9 replies

Userlevel 7

What color is the light on the Bluetooth indicator? Is it solid blue or flashing blue? Also make sure the Output Select switch is set to LINE on the back of the turntable.

It is flashing and then makes a sound and turns to solid blue. I have OUTPUT SELECT switch is set to line. Only a faint sound coming out of the turntable itself…

Userlevel 7

Is the light on the Move solid blue? Have you adjusted the volume on the Move? Are you 100% certain that the Bluetooth device paired with the turntable is the Move or could it be paired with another Bluetooth device nearby?

Yes and yes. I have turned Bluetooth off on all other devices and turned on Bluetooth pairing on both the Sonos move and turn table at the same time and lights have turned solid at the same time so can’t imagine they’re connected to anything else.

Userlevel 7

Try deleting all information for paired devices on the turntable by pressing and holding the Bluetooth button for about 10 seconds and then releasing it. Then unplug the turntable from power for a couple of minutes and reboot the Move by following these steps:

  1. Take Move off of the charging base.
  2. Hold the power button for at least 5 seconds, or until the status light turns off.
  3. Wait 10 seconds.
  4. Press the power button or place Move back onto its charging base.

Then redo the Bluetooth pairing process with the turntable and test again.

Hi there,


followed all your instructions successfully but the same problem still occurs…

Userlevel 7

Strange. I have a Move and the same turntable. I just paired them over Bluetooth and it worked perfectly.

When you put the turntable in pairing mode, are you pressing and holding the Bluetooth/pairing button on the turntable for about 2-3 seconds until the blue light is blinking rapidly? By “rapid” I mean like 2-3 blinks per second. Because if the blue light is just blinking slowly, the turntable isn’t in pairing mode.

Yes doing exactly that and tried again just now. Blinking 2-3 times a second and then pairs (Sonos move makes pairing sound) , try to play vinyl and no sound other than a faint one out of the turntable. Really irritating ! Haha 

Userlevel 7

Have you tried pairing the turntable to another Bluetooth speaker and pairing the Move to your phone over Bluetooth?