Hi all
Can you please advise me on how to connect the Beocenter 2300 so that the output sound is via the 2 x Sonos Five set up as stereo pair?
Thank you in advance
Best answer by Stanley_4
View originalHi all
Can you please advise me on how to connect the Beocenter 2300 so that the output sound is via the 2 x Sonos Five set up as stereo pair?
Thank you in advance
Best answer by Stanley_4
View originalYou might try flipping one power plug, see if the hum stops. If not flip it back and try flipping another. Try flipping them all - BUT - only one at a time. That will find any single problem device that can be cured this way.
Yup..beocenter 2300 has line out at bottom right corner. You only need 1 line in to one of the Sonos if they are stereo pair.
Thank you for the answers folk.
Turn out it is quite easier then I thought. Just use the line in and set the pairs of Five on stereo pair. However I needed to add a ground isolator block to stop the buzzing noise. Works like a champ now !
If you have an output on that device you’d likely want a Stereo RCA male to Stereo 3.5 mm male cable.
Plug it into either Five and select the Line-In to listen to it.
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.