ZP100 to integrate a turntable without preamp?
![Carving it out I Badge](https://uploads-eu-west-1.insided.com/sonos-en/attachment/5c110f10-f355-4814-9f4a-4da0a0ef737f_thumb.png)
I'm considering adding a turntable to my Sonos setup. There seem to be some good deals on the old ZP100 on eBay currently. Would a ZP100 enable me to add a turntable without the need for an additional preamp?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
No. No line-level input would allow you to dispense with a pre-amp.
A phono pre-amp does two things: boost the signal from the cartridge, and apply RIAA equalisation to counter the pre-emphasis used when the groove was cut. Without a pre-amp a phono signal would be too faint and sound bad.
Either you need a turntable which already includes a phono pre-amp or you'll have to buy a standalone unit.
A phono pre-amp does two things: boost the signal from the cartridge, and apply RIAA equalisation to counter the pre-emphasis used when the groove was cut. Without a pre-amp a phono signal would be too faint and sound bad.
Either you need a turntable which already includes a phono pre-amp or you'll have to buy a standalone unit.
![Carving it out I Badge](https://uploads-eu-west-1.insided.com/sonos-en/attachment/5c110f10-f355-4814-9f4a-4da0a0ef737f_thumb.png)
Thanks for the advice Ratty, looks like I will need to definitely factor a preamp into the equation!
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.