I recently plugged a TV into one of my Play 5s and was pleasantly surprised to discover it automatically transmitting the line-in audio over all of the SONOS system, throughout the house. I previously assumed that the line-in would only work for the individual speaker that I plugged into. Now I can hear the television audio in multiple rooms.
The problem is that I'm getting frequent, brief, dropouts. They only last for a a half-second before recovering, but I would like to get things a smooth as possible.
I should note that I am not experiencing dropouts when I listen to music via the SONOS connector.
Does the SONOS Boost benefit audio that transmits via line-in?
My current setup:
2 Play 5s
3 Play 1s (2 more on the way)
The speakers only cover a small area of about 1000 sq feet.
Question
Will SONOS Boost help with line-in drop-outs?
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
If you use the Boost plugged into the router it does two things. One, it activates the Sonosnet mesh, which allows every Sonos device to talk to eachother instead of all going through the router, and two, it allows you to put Sonos on a channel separate from your standard WiFi. Theres no guarantee, but in general, this means a much more reliable network for streaming.
Thanks for the response.
As a workaround, I plugged one of the Play 1s directly into the WiFi router, via an ethernet cable. Oddly, this seemed to make the dropouts worse, until I turned compression on. This immediately resolved the drop outs.
Is there a way to confirm if you are actually running on SONOSNet vs the general WiFi?
As a workaround, I plugged one of the Play 1s directly into the WiFi router, via an ethernet cable. Oddly, this seemed to make the dropouts worse, until I turned compression on. This immediately resolved the drop outs.
Is there a way to confirm if you are actually running on SONOSNet vs the general WiFi?
I just unplugged and plugged-in all of the SONOS speakers, according to the BOOST setup procedure in this technote:
https://sonos.custhelp.com/app/answers/detail/a_id/1072#setup
As far as I can tell the dropouts have stopped, though I'm not 100 percent sure that they are on the dedicated SONOSNet.
https://sonos.custhelp.com/app/answers/detail/a_id/1072#setup
As far as I can tell the dropouts have stopped, though I'm not 100 percent sure that they are on the dedicated SONOSNet.
+10If you go to the Sonos app and find "about my Sonos system" you will see a listing of all your products (serial numbers, software version, etc...) if it says "WM:0" for your products, you know they are in the SonosNet network and not connecting directly to the router. (Which I suspect they are).
To make sure they stay connected to SonosNet, you can go into Settings, Advanced Settings, Wireless setup and reset (i.e. delete) your home wifi credentials.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.