Answered

Port/Play 5s


I have a turntable that I want to play over my pair of Play 5s. Bought a Port, plugged in and it's only playing over one Play 5, but other sources still play as paired. What am I doing? 

icon

Best answer by kjc52000 4 January 2021, 00:02

View original

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

13 replies

Built in preamp. It was using the Port as the Room instead of the Play 5s that was the problem. Works great now

Userlevel 7

You need a pre-amp between the TT and the Port. It can be outboard or built into the TT. After correct setup you would designate the stereo paired Play 5’s (or any Sonos...either single or stereo paired) as the auto play room.

That’s strange. Having the Port play its own Line-In, grouped with a Play:5 pair, should have played both channels as normal. Only if the Play:5s were unpaired could one work and the other not.

I figured it out. It was how I was using the app. I was grouping the Port and the Play 5s when I should have been using the Port as a source under line-in. They really leave that open to interpretation. Oh well, I'm good at other things 🙄

Thanks for the assist 

Nevertheless, if the problem switches sides when the cables are swapped L<->R something upstream of the Port must be causing it. If replacing the cables has no effect I’d be suspecting the turntable. 

I tried the ones that came with the Port. Same deal. 

I’d still suggest you try alternative cables. 

I was using an adapter on the Play 5

The Play:5 takes a 3.5mm input. The Port takes 2*RCA. Different cables.

Problem is I've been line-in direct to the Play 5s the last week with the same turntable and cables and it worked fine. The only new variable is the Port. I'll try the Sonos cables and see if that does anything. Thanks 

Then the problem is outside the Port. Either in the turntable itself or the connecting cables. 

Basic fault isolation.

Yes it did. 

Swap the turntable’s cables left-to-right on the Port’s inputs. Does the problem switch sides on the Play:5 pair?