Ask a question or start a conversation about our Sonos One, Move, Five, Play:1, Play:3, or Play:5 speakers. Get your Sonos answers here.
- 4,462 Topics
- 28,316 Replies
My home theatre room drops out intermittently (Playbar + Sub + 3s as surrounds), while playing music or radio, not while watching TV. This has happened for the last couple of weeks. All other rooms are solid. This problem started after replacing to a new Sony TV, which is also at the same time has we got new neighbours in the house next to house. So not easy to figure out, I guess. I’ve unplugged speakers, changed WiFi channel and also the SonosNet channel, and the problem persist. Looking for other solutions. Diagnostic 124111491Thx
Hi,Before i take the plunge and buy an additional Sonos 5 to create a stereo pair, will this work if i only use one speaker with aux input?To elaberate a little, i’m currently coming out of a mixer with RCA to jack cable into aux input of a single Sonos 5, but want an addtional Sonos 5 to create a pair.I used to use a connect to two 1’s but the delay from mixer cue to actual speacker output was hiddious so switched to a 5 with aux input, which still slightly delays but tollerable. Just dont want to get into that situation again (if its even possible).Cheers guys
I got a Play 5 recently and have been trying to play from my record player on it via aux, I'm currently living in the dorms at uni and am unable to connect to wifi to enable auto-play. I only want to use my speaker through my aux so I refuse to spend $50 on a travel router and never use it, my last option I believe is to use my hotspot from my phone to get the speaker setup and on autoplay so I can listen through aux but it hasn't been working and fails to connect and I need help getting it setup through hotspot. Thanks
Please help, I’m going crazy with this. I have multiple Ports and a Move (no soundbar), and I can’t get the Sub 3 to connect to anything. I’ve reset the Sub countless times, but it can’t get assigned to anything. So it just sits there like a paperweight laughing at me. Any help would be great, thank you!!
Hi, My Sonos Move is connected to my windows 10 laptop using bluetooth. Everything works fine, I can play movies with VLC and hear sounds, listen to music etc. UNTIL I launch my browser (chrome but same problem with edge).For example if i launch a video on youtube, while the video is playing I have all the sounds of my computer with the sonos move, but if I pause the video, I won’t hear any other sounds coming from my computer. That means that if I’m watching something with VLC and i pause a youtube video, i have to close my browser, disconnect and reconnect the sonos move via bluetooth to the laptop to be able to hear the sounds from VLC again.I think it can be due to some controls done in youtube or netflix websites, but i’m not sure how to fix it. Any ideas ? Thanks
Bonjour,Je viens d’acquérir un HP SONOS ONE SL que j’ai placé dans la cuisine.Ce HP doit me servir à écouter des émissions TV lorsque je suis à table (par exemple le journal télévisé).Mon SONOS a bien reconnu mon réseau WiFi et ma TV est une SAMSUNG dernière génération et compatible WiFi également.Je ne parviens pas à configurer mon SONOS pour que le son de ma TV soit diffusé.Merci pour votre aide et Bien à vous.Hello, I just bought an HP SONOS ONE SL which I placed in the kitchen. This HP should be used for me to listen to TV programs when I am at the table (for example the television news). My SONOS has recognized my WiFi network and my TV is a latest generation SAMSUNG and WiFi compatible too. I am unable to configure my SONOS to play sound from my TV. Thank you for your help and Best regards.Marc Manandise
For all the times when I forget to manually put my wireless speaker into Sleep Mode: I’d like to request settings in the app that let you select the amount of idle time before Sonos Roam automatically goes into Sleep Mode. Half an hour after music stops is a long time for me and eats up battery power, and some flexibility here would be great. PS. First Sonos product and I’m very impressed so far!
I need some help please because I have 3 sonos connected (2 play 1 and 1 play 3) and I always hase connection issue with Wifi. Several time by day, i lost the connection with my wifi for a few minutes. I always have the 1001 and 1002 error message. I tried to reconnect my sonos a few time but with no effect.Some help ?
Occasionally my Move will stop playing in the middle of a local playlist. The screen below pops up and suggests some things to try.Before following step 1, to unplug your router which will disrupt your entire network, just power your Move OFF and ON.That simple step works for me.
Among all the units I have, I have two PlayBars. They're good, but I find there isn't much stereo image. I think this is purely because the L and R speaker sets are close together.My suggestion is that for this product and any stereo pair you have an option to enhance the stereo.This can easily be done in DSP by matrixing to L+R and L-R, increasing the gain of the L-R, then matrixing back to L and R.Maybe an option in the app - ideally with an ‘amount’ setting which would control the amount of extra gain applied in DSP to the L-R.There are cleverer ways of enhancing stereo, like only amplifying the L-R when there’s a peak, but I think for most situations, the simple approach would work well.Then we could 'widen' the stereo image.
Can I purchase a Sonos Roam and be ably to play the same music with my 2 room set?In other words, will the Roam sync with my current 2 room set of speakers?I want the versatility of taking the roam to my porch and have it playing the same musicas my living room. Is this possbile? John
I bought the MOVE to use as a sound source for when we have outdoor movies however we’ve been really frustrated to find out that when you airplay the sound or bluetooth the sound from a movie played on a MacBook Air the sound from the MOVE is at 50% of what it typically would be if you were playing music directly from the app. I called SONOS & they have no idea why it does this. Very frustrating because the MOVE could be ideal for this if it worked at it’s typical volume.
4 years ago I installed a playbase, woofer and 2 alexa-enabled Sonos Ones (1st gen) in my family room. Since in this configuration only one of the two sonos ones will respond to alexa, I think I will relocate one to my study and replace it in the family room with a speaker that is not voice-enabled. I have two questions: 1. what is the best choice of speaker to purchase to substitute the existing sonos one, and 2. Can I configure a single speaker in the study to play mono, or can it only be configured to play either left or right?TIA .... Greg
I am enjoying listening to Amazon Unlimited Music on my Sonos Move speaker on the patio. Since I can just say “Alexa, play oldies on my Sonos Move,” I am insulated from the details of the connection, but I am curious. I assume this connection takes place over my home WiFi network, but I wonder if it is possible, after my Amazon music session has been shut down, if my friend can then pair his phone (which has no Alexa app and no Sonos app) with the Sonos Move speaker. Thanks for helping me understand the details. Ken Traynham
I have a house with an excellent wifi system, 8 AMP units hooked to ceiling speakers, and everything plays fine and is reliable.I am trying to add 2 SL-One speakers.They won’t join, I go through the procedures but they never show up in the list of rooms after I am done.I take them to the wifi rack, hard wire them in and they join and work. Unplug them from the Ethernet wire, and they still play in the system. Unplug them from power, take them upstairs, and plug them back in and they are gone.
Hello Everyone,We will be installing in a Museum gallery several SONOS 5 speakers. They will be above guests heads on one of the walls of the gallery and will require a secondary safety mechanism in case the mount fails.Usually, we would attach a safety cable between the speaker and the mounting surface, but I have not found a mounting point on the speaker to do this. Short of drilling a hole in the cabinet (which would void the warranty) or using some sort of super adhesive mount that could hold the weight of the speaker (might also void the warranty), I am kind of short on ideas.If anyone has experience with this, I would appreciate any and all suggestions.Thank you.
Bonjour à tous..Je voulais savoir quelle était le meilleurs compromis quand on possède une barre de son arc est un sub gen 3 , je voulais installer 2 enceintes five avec... mais les vendeurs dans certains magasins mon dit que sa ne ferait pas le boulots comme prévu.... Quelqu'un a un avis concrets ? Si jamais 2 enceintes five ne font pas le taff, quoi prendre ?
A software update has meant my play:1 is not connected to my WiFi and needs some love to get going again.Sonos app is trying to achieve this via Bluetooth which is not available on a play:1.this is not just an annoying pop up like the other posts, my product does not work at all while the play:1 remains unconnected to WiFi and neither my or my partners phone can help.
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.