Having trouble with your Sonos system in any way? Ask your questions here. The more detail you can provide, the better.
- 24,102 Topics
- 118,116 Replies
J'ai une question. Lors de la lecture d'un morceau de musique, l'appli stoppe le morceau et me donne un message comme quoi il a arrêté la lecture parce que le morceau n'est pas correctement codé. Il fait cela avec un morceau sur deux depuis deux jours, peu importe le morceau. Quelqu'un a une idée de ce qui se passe?
I’ve recently received a Sonos Roam SL as a birthday gift, I’m having issues turning it off and it remaining off, as per the instructions I push and hold the on/off button for at least 5 secs (minimum) until I hear the second tone, indications are that it has turned off, even the app says it’s off line, after about 5 to 10 mins the white status light comes back on and the app I dictates it available. Any ideas please.Thanks
We have one of our Sonos Amp’s connected to outside speakers and it seems that the volume has to be over 50 (on the iPhone app) in order to hear any music. But the rest of our amps and speakers don’t go much over 20ish and have good sound. Do you think its a problem with the amp? or the speakers? any suggestions...
I have a Beam (Gen 2) hooked up to my Samsung TV and Apple TV box. Everything has worked like a charm for the last year or so.Having changed nothing, as of last night, I suddenly have no sound through the Anynet+ (Samsung HDMI-CEC) connection. Sonos still works fine via Airplay 2 with other devices. The TV sees the Sonos Beam, but when I increase the volume, rather than registering a volume number, I get a series of dots sweeping up and then it disappears (see image 1).I have spent several hours trying everything I can think of. I’ve powered everything off, removed the HDMI cables, turned everything back on and reconnected step by step. Everything is working -- except the sound through the Beam.I’ve tried re-setting up the TV through the Sonos App, but I get stuck at images 2 and 3.I’m stumped and very frustrated. If anyone could help I’d be truly grateful...Apple TV iOS 15.6Samsung TV 6100
Hi all. I've been experiencing this for a while now. I'm not sure if it's normal or not. When I open the sonos app on my iPhone 13 pro max it will refresh or search for the sonos system for a while. Initially saying no system available or errors are present and then eventually everything works fine. It's not really a big issue but sometimes it can take a while to open up and control the system. I've screen recorded what I mean. See the link here: https://drive.google.com/file/d/1ieZo8X4MTgK1MB9V4fBP-gng_AWi_T6Q/view?usp=drivesdk My system is a playbar, two play:1’s and a sub. They're all in the same room as my router. Playbar is connected to TV and wired to the router. Does anyone know if this is normal or if it is an issue with my system? Is there a fox for this? I have reinstalled the app and factory reset all speakers. TIAMike
I own a yoga studio and have 6 Play 3’s, a Connect, and a Boost. The issue I have is very specific and I am not sure how to resolve it. Inernet speeds are in excess of 350MB consistently. What happens is that when you play a song, the next song in the queue will play just fine, but the following or 3rd song will not play, and I will get a message that says “connection to Spotify was lost” then switches tracks to the 4th song. In a studio where the next song being in sync is very important this is a big issue that comes and goes. Anyone heard of this?I have tried deleting everything then reassigning it all back, this works for a short period then back we are back to this. I have tried resetting both the router and modem to no avail. For a studio this is a difficult problem but one that is so specific that there must be a solution to this, any ideas? Best!
Hoping someone can help (I’ve tried Sonos Support but couldn’t connect through to a live person)… My Sonos Roam has stopped charging entirely. I’ve tried different chargers - the same charger is still powering other devices, so that doesn’t seem to be the issue. I’ve also tried holding down the button at the back, holding down the play/pause button and pushing on the button at the back. It is making no sounds/ no lights etc (I figure because it is out of charge? maybe?). I don’t seem to have anyway to get it to work! Ideas/suggestions would be very welcome! Thanks :-)
Hi Folks, I’ll share some general advice about how Sonos products connect to your network, and the kind of network problems that can result in dropping rooms, to help you understand and solve some challenges with your Sonos system. 5GHz bandMost older Sonos devices will only connect to the 2.4GHz band, whereas some newer ones will connect to the 5GHz band broadcasted from your router. A full list of which devices will connect to 5GHz can be found here on our Sonos system requirements page, under “Products that support 802.11a/b/g/n”.It’s important to note that all (apart from early Connect, Connect:Amp or ZP models) Sonos products have 5GHz radios, but typically reserve them for talking to each other. Home Theatre products will not connect to 5GHz, as the 5GHz radio is often busy with talking to two surrounds and a Sub. Sonos prefers to use 2.4GHz as it fundamentally has a better range and a stronger solid-matter penetration ability (it gets through walls, ceilings and furniture easier
Hi. For some reason my Sonos Sub 3 has stopped working on WiFi but I have since solved the problem by connecting my Sub directly to my router.However I am curious as to why this should happen on WiFi but not on an ethernet connection?I now have my Arc and Sub connected directly to my router with just my 2 One SL's connecting via WiFi as I have had no issues with my 2 surround speakers!It was only with the Arc and Sub that I had connection issues.It was strange as when I had the problem the Sub was showing on the Sonos app but no sound was coming out of the Sub whilst it was on WiFi.Just curious. By the way I have tried all the usual things like rebooting my router etc.Just to add that before when I only had the Arc on a wired connection (I think it's called SonosNet), on the Sonos app under 'About My System' I only used to have the Arc on WM:0 but now not only is the Sub on WM:0 but the 2 SL's are as well and they are still on WiFi?How is that?I would have thought that my 2 SL's would
This question has been asked myriad times in slightly different formats/ contexts but here goes again; how do I print off the track list from a Sonos playlist so I can share it with someone else? Adding a layer of complexity, can I share it with another Sonos user?
Hello All, I have a Sonos setup in my home with a Play5, 3 Sonos One, and a Sonos Port connected to powered monitors. I have successfully run with no issues for years on my Netgear Orbi Mesh.Since the last Sonos update, each speaker drops connection randomly every day or so. The only way to recover is to power down and reboot the device. I show no issues in the network or router, have done packet tracing etc (Im an engineer) and there is no anomaly in any other device on the network (PCs, TVs, cell phones, etc). Even though it was a waste of time, I reset and re-setup all devices on the network, but the problem persists ONLY with the Sonos devices and the Sonos app. Anyone else seeing similar issues?
Hihave spend a whole day trying to figure out what the problem is. But didn’t succeed, so I hope maybe someone here could help me out. my problem is that in my Sonos app Dolby Atmos is not displayed when watching movies from my Apple TV 4K. It only displays Dolby Digital plus 5.1.alle the movies in different apps (Netflix, Disney, HBO) shows the Atmos option in the info title. Normally when this is displayed I am also receiving Atmos on my Sonos app. when using the mentioned apps from my tv instead of Apple TV 4K I am also getting Atmos on my Sonos app. Anybody who can tell med what the h… is going on :)
Hi everyone.I have an issue each time when I turn on my TV, because I lost the sound. The Sonos beam is connected to HDMI 2 (eARC/ARC) port, however It seems the TV doesn’t recognize the system. Simplelink on the TV is On and in the Sonos app TV Autoplay is On.The only way to solve this problem now is activate eARC compatibility, TV automatically move audio settings to internal speakers, and then I need to change again audio settings to HDMI and deactivate eARC compatibility in order to beam works.Its important to say the sonos app doesn’t recognize that beam is connected to an HDMI ARC port.Have anyone the same problem and found a solution?
I have a Sonos Ray hooked up to a TCL Roku TV.I like it a lot ~ but have 2 problems that did not exist before the soundbar. 1)The Volume Level is not displayed on the TV.2)The Volume does not increase when you hold it down. You need to keep pressing it.Is that correct. If I upgraded and got a Beam with an HDMI cable will that solve the problem?
My Sonos Beam is connected to my Samsung TV. It is plugged in to the TV using HDMI. When I am away for an extended time, I sometimes unplug the TV. If I do not use the Beam for an extended time, will it go into a sleep mode or is it better to un plug the power too.Thank you, Irwin
Previous (now closed) question from another user notes this problem. Suggested solution is to use Sonos app Line-Out setting as Fixed and not as Pass-through. Both that user and I have followed this fix and still unable to control Sonos Port volume using physical volume control knob. any other ideas? Thank you
Using my roam on blue tooth. As soon as screen on my pixel 5 goes black (as in goes to sleep) my roam keeps stopping for a couple of seconds then carrying on where it left off ( as goes silent for a second or 2). It does this about every 10 seconds. When I turn off automatic sleep so my phone stays on it keeps working normally although this drains my phone battery. It does it even if my phone is within 1m of the roam. There is no WiFi network where I am so that is not an option. No other device is linked to roam. Any help gratefully received.
Sonos version: 11.2.13Plex version: 18.104.22.16882 (same issue encountered with 1.24.x.x)Plex running in Docker container on an HP MicroServer serving music stored on same server. Plex app works fine and can browse/stream music from internal LAN and from outside LAN. Sonos app can browse music on Plex fine.Until recently, I’ve been able to stream Plex music to SONOS without issues. It stopped working a couple of days ago. A new Plex update became available today and I’ve tried that with no success. Problem description:I believe the following are related issues as they started at the same time.Variant 1:Using the SONOS appFind and select track from Plex. When Sonos attempts to play track it reports error:Unable to play track '<track name>' - the connection to Plex was lost.Variant 2:Using the Plex web app, the cast locates SONOS boxes but when trying to connect reports:Playback ErrorAn error occurred loading the media being played on "<sonos device>". Expected behaviour:SONOS p
Basically every other time I turn on my TV the Beam(Gen 1) will not connect with the TV. I then need to unplug the HDMI cable from the TV and plug it back in for it to connect, or doing the Tv setup in the SONOS app also helps with this issue. If I try to fix it within the app, I also need to do the TV setup two times, the first time it will say there was an error, but when I try again it works. I usually just end up removing the cable and putting it back, since that is much quicker.The annoying thing is it happens basically just every other time I turn on the TV. Both the Beam and the TV are running all the latest updates, this has now been going on for about a year. I have tried resetting the TV but that did not help.I have also noticed that when I turn off the TV, sometimes the LED on the Beam turns green, sometimes it stays white.I'm using the HDMI cable that came with the Beam to connect the TV, but maybe changing the cable could help.TV model: TCL 50P815 Running Android TV
I have had my Playbase for about six years and love it. I added a Roam SL just before Memorial Day to replace a dead Bluetooth travel speaker. All of the devices are on an isolated Wi-Fi network and are within 15 feet of each other and the router. We have three iOS controllers- fifth gen iPad, iPhone 13 Pro Max and an iPhone 6S.Some days all of the controllers see the Playbase/Roam pair which is nice.Other days not so much. If lucky on those days at least one controller will see the pair while the others only see the Playbase. Start playing music on the working controller and magically after some period of time the others controllers will see the pair. If unlucky, all of the controllers will only see the Playbase and we have to go through the Support/Find Missing Products routine. If very unlucky, a controller will appear to see the pair and actually start playing music, but you cannot adjust the volume and if you even touch the Rooms button the Roam will stop playing and back to the S
I have 2 hard wired non-Sonos speakers that were working fine for almost a year and then one stopped working. I reset the amp and then the one that wasn't working started to work and the other was silent. On my app in shows no line-in connected but I checked all of the connections. Any ideas?
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.