Talk Sonos Products
What Sonos product is best for you? How do you expand your Sonos system? Have a Sonos tip or trick to share? Show off your setup and your products here.
Can we do this setup ? In Front Right and Left with Sonos Amp connected to the TV along with the Sub and at the back (Rear) will take Era 300 or Sonos 5 , is this setup will work as 1 Surround setup or not ? I don't want to use Arc , I want to use Right and left in wall Sonance Speakers with Sonos Amp + Sub + rear, back Speakers either Era 300 or Sonos 5 , can we do this setup or not.
Now that Spotify issue has been resolved, I have a question for Amazon Music users. I use to pay $10 for Amazon Music along with $10 for Spotify until I dropped Amazon for Spotify. Back in April I joined Amazon Prime & paying monthly for now. My understanding is that joining Amazon Prime gives me access to Amazon Video & Amazon Music. I installed the Amazon Music on my Sonos app so I could access the music while listening Sonos. When I select the band/artist it goes into shuffle mode. I cannot access the album in song order. Even if I were to go to Amazon Music app & Airplay it to Sonos app it tells me I’m in shuffle mode and if I want to listen to the whole album in order I would have to sign up for their upgrade? I don’t want to pay extra to use Amazon Music if I already have Prime.
Hi, ive got a Sonos Beam (Gen1) and a REL sub (Active Sub with Line-In). The Beam has no output sockets, and my LG OLED TV only lets me use 1 sound output at a time, hence i’m using HDMI arc currently to the Sonos Beam I see a Sonos Connect (not the amp version) has a ‘sub line out’ which i assume will allow me to get the sub working. However i’m confused, how does the Sonos Connect get a line-in (the actual sound feed), or does the sonos software use its magic and take it from the network cable and see the Beam on the network and play the music in sync via the sub? please advise/help if you can please before i commit to buying a Sonos Connectthanks
I just found out that sonos now supports Apple Music.I have spotify but everything else in my house is apple.I was thinking of making the switch to apple music now that it is supported but I have an older system currently and wondering if I will need to upgrade.I have one generation 1 with alexa, Play 1, Playbar and 2 Play 3 Thanks
I know the Roam has Battery Saver and Wifi Power Saver, but it should have the ability to choose to complete power it off after lets say 30min.If i power it off and keep it in the charger stand, it will indicate on Sonos app that it is off and not response, while it still charges to full and stay off.I dont need it to be “online” all the time like the rest of my Sonos One system, and it should have a feature like that, to also save the battery in the long run, and not force me to have to remember to turn it completely off.
I have more than 20 Sonos speakers finally working together in our home. For a vacation rental next week I’d like to take a couple of speakers for use there. I have one Move and know that w its Bluetooth, I could easily use that without messing with any rental WiFi matters. Does the Move provide a means to incorporate additional Sonos speakers? Or is it the usual process of taking an Ethernet cable and hoping for success w the rental’s router?Would a « travel router » be a good idea to purchase and take with us?And lastly, if we set up a new Sonos network at the rental, will that negatively affect out home’s network when we return and set up our speakers to work again with the residence setup?
I have a Samsung TV and a Beam Speaker. When I turn on the TV, the Sonos App on my iPhone no longer recognizes that the TV is on and I am unable to control the TV (Beam) volume with my iphone Sonos App. I am still able to use my Samsung remote to adjust the Beam volume, but I prefer to use my iphone Sonos App to adjust the volume . How do I get my iphone Sonos App to recognize that the TV is on? I already checked Settings on the Sonos app, and “TV Autoplay” is turned on. I tried turning the TV Autoplay on and off, and I tried turning off and on my iPhone, but this did not help .
Is there a way to remote disconnect a specific speaker or music service in order to turn off an alarm while I’m traveling (ie not home on the network)? I’m trying to figure out how to spare my poor neighbors in Brooklyn from the alarm currently going off in the apartment. I’ve truly had it with this system…
So i have several Sonos setups. I have a surround one SL pair, one play5 and a Beam plus One SL surround combined for tv. My iPad will let me airplay to all three setups but when i select any of the three setups on my iPhone (airplay sees them just fine) i get an Airplay passcode request.please don’t tell me to reboot or re setup the sonos devices because this was done multiple times and is annoying to do. it works perfectly fine on iPad but on iPhone it asks for passwords. I have no password requirement setup in AppleTV or on Airplay.Everything is setup on the same (and only) WiFi network available. And as said it all works fine on iPad why is airplay asking for passcode on iPad?
Hi We are currently building a 3 level townhouse . On the bottom level I will have a high end hiding system inside . There will be 3 balconies and I am looking for a good sound system on each of the 3 level balconies, it needs to be based on wireless speakers as I do not want to run anymore cables from inside to out . I will have a very good wifi mesh system. Each balcony is outside with ocean views but undercover . I have allowed to have power outlets 2 metres above ground on each side of each of the balconies . My high system DAC uses tidal and Roon . my question is : would era 300 or Sonos 5 or move Pairs on each balcony be best ? Or is there a better solution . I want to be able to control what balcony is playing at any time and if at all possible have different things playing on different balconies cheers and thanks for any input Warren
Hey Sonos support, please note that the string table for PowerApp has invalid xml in it. Specifically this:<?xml version="1.0" encoding="UTF-8"?><!--rev numbers are to be ignored, and should not be used.--><stringtables xmlns="http://sonos.com/sonosapi"><stringtable rev="1" xml:lang="en-US"> <string stringId="ServicePromo">PowerApp - Unlimited Music & Video</string> <string stringId="Button_Register">Sign up For PowerApp</string> <string stringId="Button_Login">I already have an account</string> <string stringId="Error5Message">Access token not found, retry</string></stringtable><stringtable rev="1" xml:lang="da-DK"> <string stringId="ServicePromo">PowerApp - Unlimited Music & Video</string> <string stringId="Button_Register">Sign up For PowerApp</string> <string stringId="Button_Login">I already have an account</string> <string stri
The AMP connects to the TV using ARC which means it should be able to receive a higher quality audio signal from streaming and local media.Even the first generation Sonos Beam supports it, yet the more expensive AMP does not. Is there any reason why this is the case?DD+ is vastly superior to DD, and considering most people who have the AMP pair higher end bookshelf speakers with the device, we should have the option to listen to DD+. What do you guys thing?
Hello All, Looking for advice.Current setup: I have a Sonos AMP connected through the ARC port to my LG TVThe Amp is connected to my 3rd party Kenwood Sub and also 2 kenwood L & R speakers on either side of the TV. Proposed budget setup: I wish to get 2 sonos play 5 speakers to replace the L & R speakers.Would this be a resonable setup? Thanks
When playing on-demand streaming music via Spotify or another source I can skip or rewind tracks using the Next/Previous touch controls on the top of my Sonos. Thus I can change the music without getting my phone out or going to a computer or yelling at Alexa, ect. When listening a streaming radio station, the Next/Previous controls do nothing except flash an orange error light. I would love to be able to use Next/Previous touch controls to cycle through my saved streaming stations!My $20 FM radio can change stations without requiring the use of a smart phone app, it will be cool if my Sonos could do that too! 😁
Hi all,I’m new to this forum. My name is Mark, and I need some advice on the setup with a high ceiling. I was looking to buy Arc or Beam, but not sure if Dolby Atmos would work in this setup. The top of the ceiling in the middle is 4m.Soundbar preferred as I want to minimise cables, but open to other configurations if the ceiling is an issue. Assume windows would be closed while watching TV, and the view here is from the wall closing the room.Any suggestions on the recommended setup would be much appreciated.Cheers,Mark
Let's talk business
Sonos is looking for engaged business owners and installers in the EU and the USA to influence Sonos’ product development.Take the survey
Take the survey and you could join the Sonos Professional Sounding Board, an exclusive online research community.
Members have the opportunity to participate in discussions, surveys, focus groups and more. You’ll be rewarded for your time and efforts with points that can be exchanged for rewards, plus you’ll have the chance to win Sonos product and swag!
Login to the community
Log in or register to reply
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.