I have ray and era 100 how do I set up for surround sound have paired them but I think they're working as stereo not surround ?
Bonjour, Le Sonos Port est il compatible avec la Sonos Arc ?Le Sonos Port peut-il envoyer du son ( en wifi) sur la Sonos Arc ? Merci d’avance . Moderator edit:Google Translate-Good morning,Is the Sonos Port compatible with the Sonos Arc?Can the Sonos Port send sound (over wifi) to the Sonos Arc? Thanks in advance
Howdy folks - Love the Sonos S2 app but it’s had a bug for a while that has gotten on my nerves. With the Sonos S2 App open, you can use the physical hardware buttons on the phone to increment the volume. Every press on the up button increases volume of the selected group, every press on the down button decreases the volume of the selected group. This works fine! The trouble is the selection of the volume increment. When adjusting the volume from a volume of 1, up will increment by 1. 1 goes to 2, 2 goes to 3, etc. Once the volume is above 10, it begins to increment by 2. 10 goes to 11, 11 goes to 13, 13 goes to 15, etc. Once the volume is above 20, it begins to increment by 4. 19 goes to 21, 21 goes to 25, 25 goes to 29, etc. It also works the same way for decrementing but I don’t think this is ideal behavior. It seems the logic is implement like this:Volume 0-10 → increment is 1Volume 11-20 → increment is 2Volume 21+ → increment is 4But that means the behavior is different for up an
Helloi have an amp connected to 4 sets of in ceiling speakers that was working great and now suddenly when I put the volume past 70ish the sounds cuts out. When I unplug the right banana clips I can go up to 100 volume. I understand this to be a safety feature so the amp doesn’t break beyond repair but I can’t fathom what has happened to the right cables to cause this issue. We had some construction work done and new lights installed but I don’t see how it could be related. Does the community have any ideas what the issue is in the connections/cables to cause this? thanks in advance for the help
Hello! Just a question. I have an Arc, 2 Play:1 and a Sub (gen 2). Is it 5.1 or 7.1 ? Thanks in advance!
Hello, I’ve never used the S1 app, but I’m looking into buying a ZP90. Can I stream Apple and Amazon music on S1? Just looking at getting an audio signal into my old hifi system. It has an optical input, but not coaxial, so I don’t want to get a Port. Thanks
What is the purpose of Bridge if it prevents updates from downloading and installing on Sonos products. The support site recommends permanently disconnecting the Bridge
I’ve had my Sonos system working ok until recently. Underwent an ISP change that threw some things for a loop.Where I’m at now is….I have an Apple Music Subscription. What I’d like to be able to do is download one of my Favorites playlist to the local hard drive. Then, add that folder or playlist to My Library in Sonos so I don’t have to rely on streaming as much but rather play these local files that Apple lets me use for offline use. Is this possible with Sonos/Apple? I’ve been trying my best to add it and it does not work. It will however recognize files I uploaded to Apple Music (so I guess they look at them as mine), but I can’t get the other local downloaded files to appear. Any way to do what I’m thinking? Thank you!
Have a Playbar, no issues. Not sure if upgrading to Beam2 or Arc would be improvement. we are seniors.
Hello!There is a new Sonos Port in our office. The Sonos Port is located in the server cabinet, connected via an ethernet wire to the nearest switch. The network is new and the Internet is about 200 Mbps. There is only one subnet. There are no conflicts on the network. The network engineer confirmed it. I noticed a problem connecting to the Sonos Port with the new S2 version (updated). The updated Sonos Port (with S2) is not detected on the network. I tried to connect from my smartphone (Sonos S2 App), and also tried to find it from my computer (with Sonos S2). A long search for the device, eventually not to be found. Then I made a rollback (Downgrade) to the S1 version. After the rollback, the Sonos Port began to be detected normally on the network. In the previous version, an update message is intrusively coming out. Dear developers, please check this situation, it is necessary to fix the bug and optimize the new version of S2 for Port. Thank you!P.S. Please move the topic to Audio C
Hi, today I upgraded my Beam 1 to a Beam 2. I have two One surround speakers and a mini sub.I’m using a 2022 LG Oled with earc, I own, Switch, PS5, Xbox series X and Apple tv. Now, since upgrading I’m totally lost what my settings for each should be :( Currently with switch I’m getting Multichannel PCM 5.1. Which is what I should be getting.But on PS5 I set my settings to Dolby Atmos but the sonos app tells me that the audio is multichannel PCM 7.1. Even when using a Atmos game. Apple TVis also showing as multichannel PCM 7.1 Is that the correct audio that I should be getting as my system is only 5.1? Why 7.1 and not dolby?On Xbox, I have set it to Dolby atmos and with that it shows as Atmos in the app. But then I read that atmos on Series X has a delay. So, I'm lost as to what my best settings should be. Can someone here please be kind enough to what the best TV/console settings are for each device? I’ve done a search but there does not seem to be any PS5 settings suggested after it
The microphone in my Beam gen 2 won’t turn on. Is this fixable?
I’m having an issue with low bass above 50% volume. Sounds great until the 50% mark, then the bass progressively gets lower as the volume goes up to 100%. By full volume there is basically no bass.Is this just a trait with this speaker or do I have an issue?Thank you.
I've used the Sonos arc, sub mini, and one SLs for over a year and I've never had any issues. Last week I decided to get two era 300s to replace my one SLs because I watch a lot of Atmos content. After I installed the era 300s, the whole system's sound cuts out randomly, and does not come back. I'll be watching a movie on say Disney+ and the sound will just cut out, not just in the 300s but all of the speakers, and the tv will continue to play the movie. All speakers are connected via wifi, I have rebooted my router and unplugged everything and plugged in the router, then tv, then the arc and each speaker to make sure they're all connected to the same network (2.4ghz). The Sonos arc is connected to my LG G2 77 tv via the hdmi cable that it came with to the tvs eARC port. One way I've found to get the sound back, as it doesn't ever come back on its own, is I go into my TV's sound settings - > click on digital sound output - > change the sound from pass through to auto, and then b
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.