Truplay with Amp locked to Sonos branded Sonance speakers only?

  • 7 February 2019
  • 28 replies
  • 3942 views

Userlevel 2
Badge
  • Trending Lyricist I
  • 15 replies
Announcement of the new Sonos external speakers (made by Sonance for Sonos to be sold as a Sonos branded product) has the hidden tidbit that with this setup Truplay will work to tune the speakers attached to the Amp.

There is mention of automatically detecting the signature of the Sonos-specific Sonance speakers. This sounds like a DRM to purposely prevent Truplay from working with any other 3rd party speakers connected to the AMP - including standard Sonance speakers already sold and being sold.

Is there any technical reason or is this a marketing ploy to push the new Sonos/Sonance speakers as "better" for Sonos Amp? I think allowing Truplay with any speakers attached to the Amp would be more customer friendly.

All existing AVR receivers with sound correction work with any attached speaker since most AVR makers don't make any speakers they obviously assume the customer will be choosing their own brand of speakers.

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

28 replies

Userlevel 6
Badge +11

 

Hope that’s helpful for someone. Feel free to ask any questions about the setup or experience.

How is Truplay with the speakers?

My wish list from Sonos:

  1. Make volume level for TV input independent from when playing music (i.e. have it jump back to the prior level used for that input/source). We have to crank up the volume up much higher for TV and have to quickly crank it down when regrouped it to music. Would be nice if it just remembered where it was last time the TV input was being used.
  2. It’s great that the Amp can ungroup itself from other rooms when the TV is turned on...but can we get it to re-group once the TV is turned off? What ends up happening is the wife/kids turn off the TV and it never goes back to music until I get around to regrouping...so using less than I would like to (i.e. getting less value out of it). This would by my #1 request, but without the volume jumping back down to the “music level” this would actually be a nightmare if it just randomly jumped back into the music grouping at full blast.
  3. Center channel support by pairing a Beam, etc. This is a distant #3, but might be nice….you can see below I’m not a huge multi-channel guy.

 

These are things that have been requested before.  I think they appear pretty simple, but get more complicated when you explore them more deeply,  Mostly because I think there’s going to be a wider variety of what people actually want in these areas.  For example I get that you would want a separate volume for  TV and music playback, but I would want something slightly different.  I want a default initial volume every time I turn on music, and the same for TV, depending on the time of day.  I don’t want my TV linked room to join the prexisting group when the TV is turned off.  I actually want the entire existing group to turn off when the TV is turned on...depending on what’s in the existing group.

Perhaps it would be nice if Sonos built in the ability to setup your own routines based on certain triggers.  You can do a lot of stuff with 3rd party controls, but to my knowledge, you can’t trigger events based on actions that happen on your Sonos speakers.

As for the Beam as a center channel only, I won’t go there.  I would claim it’s never going to happen for various reasons, but now we have the dual sub option that I thought would never happen.

 

Final thoughts….if you’re comparing this to the Arc I would think about your room size more than having all these separate channels from Dolby Atmos. You likely have more stereo content you are listening to than even “regular old” 5.1 content, and good stereo separation likely makes a bigger impact (IMHO). I haven’t listened to an Arc, and it wasn’t available when I bought my setup, but other than weighing the install hassle (which is real) I think I would still go with the Amp. Just for kicks I wired an old Connect:Amp as rear surrounds (before the S2 upgrade) and threw up some old surround monitors and watched an action flick (yes, it allowed surround TruePlay tuning even with my old Polk Audio surround attached to the Connect:Amp)….having the surround channel wasn’t even worth the wires going everywhere. There just not enough actual content being directed there to justify it. The sub on the other hand makes a big difference, and not just for movies of bassy music. It just allows the full depth of whatever your listening to to come through. - Just my opinion!

Hope that’s helpful for someone. Feel free to ask any questions about the setup or experience.

 

There’s some assumptions about how people watch TV here that I don’t think necessarily apply.  For me personally, I stream a lot and get a lot of surround audio.  Having the rear speakers there are worth it.  As well, my room layout makes using a soundbar a lot more reasonable than wired left and right channels.  But you’re point about considering the room playing in, and what content you have most of the time, is absolutely true.  There is no one size fits all, which is why we have options.

Badge

Thought I’d follow up here (~1 year later) to give my experience.

First, I was wrong about the Sonance speaker pricing...that was per speaker (single). With my 30% trade-up credit from an old Connect (was using with an aging 5.1 receiver) going to an Amp+Sonance In-Walls speaker package, I found the price to be quite reasonable and went for it. I tried to save on the sub and bought a Klipsch 12”...which my wife hated. I can confirm the system would let me TruePlay with the 3rd party sub, but ended up returning that and buying the Sonos Sub when they had a refurbished deal on Gen 2s (right before the Gen 3s came out). Much prettier looking and the wife approved. The white version blends into the corner quite nicely (thought it would look stark and stand out more than black, but it does not).

I love the in-wall setup. One thing I would HIGHLY recommend are the back-cans that Sonance makes for the in-wall speakers (found mine on BestBuy for ~$50 for the pair). Made a huge difference in projecting sound into the room (and away from the bedroom on the other side of the wall). Sonance makes big ones that install behind the dry wall for new build installations, and small ones that screw into the back of the speakers for old-work installs. The screws perfectly align with the Sonos-Sonance speakers and the cans seal well around them (Sonos should sell or include these!). I TruePlay tuned them after the back-cans were installed and it sounds amazing. I’m not a supper hi-fi type guy, but can say that TruePlay does make a noticeable difference in our living room that has wood floors and a high-pitched ceiling. Your mileage may vary.

My wish list from Sonos:

  1. Make volume level for TV input independent from when playing music (i.e. have it jump back to the prior level used for that input/source). We have to crank up the volume up much higher for TV and have to quickly crank it down when regrouped it to music. Would be nice if it just remembered where it was last time the TV input was being used.
  2. It’s great that the Amp can ungroup itself from other rooms when the TV is turned on...but can we get it to re-group once the TV is turned off? What ends up happening is the wife/kids turn off the TV and it never goes back to music until I get around to regrouping...so using less than I would like to (i.e. getting less value out of it). This would by my #1 request, but without the volume jumping back down to the “music level” this would actually be a nightmare if it just randomly jumped back into the music grouping at full blast.
  3. Center channel support by pairing a Beam, etc. This is a distant #3, but might be nice….you can see below I’m not a huge multi-channel guy.

Final thoughts….if you’re comparing this to the Arc I would think about your room size more than having all these separate channels from Dolby Atmos. You likely have more stereo content you are listening to than even “regular old” 5.1 content, and good stereo separation likely makes a bigger impact (IMHO). I haven’t listened to an Arc, and it wasn’t available when I bought my setup, but other than weighing the install hassle (which is real) I think I would still go with the Amp. Just for kicks I wired an old Connect:Amp as rear surrounds (before the S2 upgrade) and threw up some old surround monitors and watched an action flick (yes, it allowed surround TruePlay tuning even with my old Polk Audio surround attached to the Connect:Amp)….having the surround channel wasn’t even worth the wires going everywhere. There just not enough actual content being directed there to justify it. The sub on the other hand makes a big difference, and not just for movies of bassy music. It just allows the full depth of whatever your listening to to come through. - Just my opinion!

Hope that’s helpful for someone. Feel free to ask any questions about the setup or experience.

Badge

I have a set of VP66s hooked up to the new sonos amp and when I hit detect sonos architectural they are not picked up. The VP66s appear to be higher in range from a sonance perspective than the sonos colab so it appears they do lock it out to that 599 set only which is disappointing. Just an FYI for anyone who wasn’t able to find confirmation.

Thanks for that - have been trying to figure out what actually happens when you plug it into other Sonance speakers of similar spec. From what I can tell their set are VP62...which retail online for about $350. I spoke with Sonos sales today and they told me they worked with Sonance to specifically engineer these for Trueplay and the ability to chain three sets together (which sounds expensive). Curious what your view is on using the Amp with the ‘66s and if you think Trueplay is worth paying more for the lower spec ‘62s.

Also, anyone out there actually use these with the Sonos/Sonance speakers and can attest to what improvements Trueplay gives you vs. the stock setup? And if so, can you say if it still works if you plug in a 3rd party amp (sales person said it would, but I read online that it would not).

Thank you!!!

When I said “3rd party amp” at the end, I meant a 3rd party powered subwoofer...meaning if you have the Sonos/Sonance speakers, and plug in a non-Sonos sub can you still Trueplay calibrate the system? Thanks. 

Badge

I have a set of VP66s hooked up to the new sonos amp and when I hit detect sonos architectural they are not picked up. The VP66s appear to be higher in range from a sonance perspective than the sonos colab so it appears they do lock it out to that 599 set only which is disappointing. Just an FYI for anyone who wasn’t able to find confirmation.

Thanks for that - have been trying to figure out what actually happens when you plug it into other Sonance speakers of similar spec. From what I can tell their set are VP62...which retail online for about $350. I spoke with Sonos sales today and they told me they worked with Sonance to specifically engineer these for Trueplay and the ability to chain three sets together (which sounds expensive). Curious what your view is on using the Amp with the ‘66s and if you think Trueplay is worth paying more for the lower spec ‘62s.

Also, anyone out there actually use these with the Sonos/Sonance speakers and can attest to what improvements Trueplay gives you vs. the stock setup? And if so, can you say if it still works if you plug in a 3rd party amp (sales person said it would, but I read online that it would not).

Thank you!!!

Userlevel 5
Badge +1
I have a set of VP66s hooked up to the new sonos amp and when I hit detect sonos architectural they are not picked up. The VP66s appear to be higher in range from a sonance perspective than the sonos colab so it appears they do lock it out to that 599 set only which is disappointing. Just an FYI for anyone who wasn’t able to find confirmation.
So pretty much what Sonos does BEFORE TruePlay.
Indeed. It's called an 'active speaker'. 😉
It looks like Devialet measure the speaker's effective transfer function in the lab then apply the inverse in the amp, so as produce linearity in ideal conditions. Quite how that deals with real room resonance modes, or compensates for a speaker stuffed inside furniture, is unclear.

So pretty much what Sonos does BEFORE TruePlay. Great if you're in a room with good acoustics, but not room correction. BTW, Alan Shaw of Harbeth wasn't terribly pleased about Devialet doing this for his speakers, without his consent.
I'd still vote for multiple 'levels' of tuning available based on what speakers/equipment you have, and what mics you're using. Then again, I can't really say if lower levels of tuning make a big enough difference to be worth doing.
Userlevel 2
Badge
Yeah, the obvious elephant in the room is how much do any of these systems use science/tech or just voodo? How much difference does it really make and how much is just clever sounding marketing BS.

At least as far as the normal consumer is concerned, not the "vinyl versus digital and tubes versus transistor" ultra fanatic crowd.
It looks like Devialet measure the speaker's effective transfer function in the lab then apply the inverse in the amp, so as produce linearity in ideal conditions. Quite how that deals with real room resonance modes, or compensates for a speaker stuffed inside furniture, is unclear.
Devialet's SAM system has templates for every speaker they've measured, so their "secret sauce" is specific to certain speakers, too. Lots of marketing BS here, but may be some sound engineering behind it: They do tend to market to "high end" customers, so I take them with huge grains of salt.

https://www.devialet.com/en-us/expert-pro-sam/
Userlevel 7
Badge +26
It's great that they offer such flexibility, that's a level of compromise worth respecting. I'm happy to pass along the message to the team that you'd like to see more flexibility here. I can only assume what their tuning does is different from what we do with Trueplay, similar intent, but different ingredients and process. Yes, the reason that we're only using iOS devices only for Trueplay is that we found too much variety with Android devices.
Userlevel 2
Badge
I understand the microphone bit (hence only iPhones and not Android?), but I use Anthem ARC and it works well with any brand of speakers. I know this is apples to oranges (standard AVR amp with 3rd party speakers versus proprietary
Sonos Amp/Speakers), but I am just pointing out that Anthem's "secret sauce" works with any speaker and for microphones, they actually now offer a mobile app but strongly suggest buying their calibrated microphone as they believe there is too much variability in the built-in iPhone microphone.

So kind of interesting - they have the "secret sauce" to do audio correction with any speaker but must use their special microphone, while Sonos "secret sauce" with work with vanilla iPhone microphone but only Sonos or Sonos/Sonance speakers.
Userlevel 7
Badge +26
So can the new speakers be used with existing Connect:Amp and allow TruPlay to be used?
The Connect:Amp isn't able to run the room that's going to Trueplay with these new speakers.

The continued use of the word "unlock" sure sounds like an artificial DRM-style restriction to me.
In order for Trueplay to work, we need to know some specifics about the speakers and the microphone that's being used. It's part of how our Trueplay algorithms are designed, but I can't go into the details of the "secret sauce". This is one of many reasons why we've worked to specifically design these speakers with Sonance.
Userlevel 2
Badge
The continued use of the word "unlock" sure sounds like an artificial DRM-style restriction to me.
Userlevel 2
Badge
So can the new speakers be used with existing Connect:Amp and allow TruPlay to be used?
Userlevel 7
Badge +26
Lots of wild speculation around here. Why not simply ask Sonos?

Hey Sonos, do these Sonance speakers include a special chip which identifies them as TruePlay-compatible zone players within an existing Sonos household?


It's not exactly "a special chip", but there is a way built into the Sonance and Sonos Architectural speakers which allows for the Amp to identify that it's connected with them, and will unlock Trueplay for that room.
Lots of wild speculation around here. Why not simply ask Sonos?

Hey Sonos, do these Sonance speakers include a special chip which identifies them as TruePlay-compatible zone players within an existing Sonos household?
Userlevel 2
Badge
Just a minor clarification - although Yamaha and Denon (I think) have you keep the microphone in one place), Anthem gives you a tripod to hold the microphone at ear level, but you move around and take samples from multiple physical listening locations in the room.

And Anthem also has an app that runs on iOS devices using either the built-in Apple microphone or a calibrated external microphone.

They were very clear that they felt using the internal microphone was not ideal because of manufacturing variability and the internal mic can degrade over time and if the vents are clogged, etc.

In case you were not aware, Anthem, unlike most AVR's, uses a separate user-suupplied PC and a special individually calibrated microphone to perform the ARC calculations and not the internal DSP/CPU in the receiver. They claim more accuracy and horsepower, sounds right, but I have no data to prove/disprove that.

All existing AVR receivers with sound correction work with any attached speaker since most AVR makers don't make any speakers they obviously assume the customer will be choosing their own brand of speakers.


Which actually makes me speculate that Trueplay is not exactly the same as the typical sound correction you get with other AVRs. Trueplay has been out for several years, long before these Sonance speakers were even thought of. If Trueplay could work with any 3rd party speakers, why didn't they give the Connect:amp Trueplay capabilities? There would be no sales benefit to Sonos with that exclusion, since they couldn't profit off sales of their own passive speakers. Perhaps they wanted to discourage sales of the Connect:amp in favor of their own smart speakers that do have Trueplay? Perhaps the Connect:amp itself wasn't capable of Trueplay tuning for some reason?

Another difference between Trueplay and other AVR sound correction tech is that Trueplay asks you to move the microphone about the room, while other tech has the mic stationary throughout tuning. So clearly they are not synonymous. Doesn't prove that Sonos isn't putting an artificial restriction either.

There are other features of Sonos products where they could have easily put in artificial restrictions to boost sales, but didn't. Things like music services available, voice control, airplay compatibility. Although in fairness, the benefit of restrictions would be minimal, and probably not worth any potential loss in customer goodwill.

Also worth noting that the outdoor Sonance speakers do not say they can be trueplay tuned. Sounds like trueplay won't work well in an outdoor environment.

All that said, since you clearly can do some form of tuning with any speakers, it seems like it would be a win for Sonos to offer a level of tuning for those with third party speakers, if Trueplay isn't an option. If it could be particular useful as an option for android phone users. But maybe Sonos doesn't feel like such an option is up to their standards.
Userlevel 2
Badge
The reply above "unlocks Truplay" sure sounds like DRM (artificial technical restriction) to me - untypical or not.
OK so you have some business gripes with Sonos. I said it would be untypical of Sonos to deliberately limit the experience of the bulk of users under the excuse of technical limitations, and I stand by that.
https://investors.sonos.com/news-and-events/investor-news/latest-news/2019/Sonos-Unveils-Sonos-Architectural-by-Sonance-the-First-Premium-Architectural-Speakers-Designed-for-use-with-Sonos-Amp/default.aspx

When paired with Sonos Amp, the In-Ceiling and In-Wall speakers’ unique hardware signature unlocks Trueplay™ which accounts for the size, construction, and furnishings of the room where the speakers are placed, and automatically adjusts the EQ for optimal sound.

This suggests something electrical rather than an audio watermark (which could be obscured by the room effects). Perhaps the Amp recognises a unique impedance characteristic. I suppose it's also conceivable that the speaker senses a low DC voltage and responds in some way to basic signalling. Intriguing.
Userlevel 2
Badge
Mainly business issues revolving around inventory levels, pricing and pricing/adjustments, availability, and channel conflict. Most are historical and hopefully no longer apply, and it isn't appropriate to discuss here but very common chatter in any dealer forum or discussion group.

Also a lot of historical issues with not providing an official API and cutting off, with very little warning 3rd party integrations that used widely known but unsanctioned integration methods, etc.

I came into the game later (last few years) so I don't have most of that baggage and unlike traditional dealers, I don't rely on selling products on big markups for profit so all the pricing complaints are not an issue for me.

Not promoting here or trolling, but since you asked, I charge for my time/design/install/support and client can buy all the equipment themselves while traditional dealers still want to make a large profit on the equipment which can be impossible when Amazon, Best Buy, and others sell everything close to dealer cost, in some cases.

That's an industry problem, not specific to Sonos but when you start out with big profit margins to dealers and they get squeezed, they have long memories 🙂