Looking to get started with Sonos? What Sonos product is best for you? Get help and advice here.
I currently have my Sonos Connect connected to a Sony STR-DH590 receiver to power my Living Room in ceiling surround speakers. Is there anyway to connect my Sonos Arc to this receiver so I can have the ceiling speakers and ARC play together?
I’ve just installed BT full fibre with their Smart Hub 2 router, and initially, it could not connect to my Sonos Arc. (The sonos app could not see the network). I read all the suggestions online, that all seem to date from about a year ago, and nothing worked - I unplugged the digital voice adapter for the phone, I turned off 5 ghz, but it still didn’t work.I then switched the router to ‘mode 3’, and it connected fine, and is now working fine. Looking at BT’s advice, it seems that ‘mode 3’ means the router is working in ‘b/g and a’ mode, rather than ‘g/n and a/n/ac’, which is apparently better. I’m wondering what the differences are between these modes, and if, now that the Sonos has recognised and connected to the network, I can try switching it back to the better mode?
HejJeg har en Sonos Play:5 som tidligere har fungeret fint over wifi, nu har jeg skiftet wifi og nulstillet min play:5. Den vil nu kun oprette forbindelse til mit internet via kabel. Når det så er oprettet og jeg prøver at få den koblet på wifi så lykkedes det ikke. Når konfigurationen når til punktet hvor højttaleren skal forbindes til det midlertidige wifi “SONOS” så forsøger den men skriver at det mislykkedes. Jeg har aktiveret wifi i indstillingerne for Play:5 i Sonos appen. Jeg investerede i en Boost i håb om at den kunne redde det, men det kunne den ikke. Hvad kan der være galt siden wifi ikke virker i højttaleren?
Hi. Can I use Sonos Arc + Sonos Amp for Indoor Ceiling Speaker + Sonos Amp for Outdoor Speaker all connected together to a single TV..? Can I play independently OR merge the TV Sound on Sonos Arc / Sonos Amp for Indoor Ceiling Speaker / Sonos Amp for Outdoor Speaker when I have connected all 3 Sonos product on Wifi Network..?Thanks in advance.
Diagnostics: 1020127941Hello!So my problem is the following:I have an IKEA symfonisk lamp/speaker. I recently needed to change internet providers so I have a new router. Today I wanted to connect for the first time since that change to my device when I was unable to find it in the system without an Ethernet cable. To be able to connect again through Wi-fi I had to: Reboot my speaker to factory settings Change my SONOS account to a different email.After that and at least 2 hours of troubleshooting I managed to reconnect my speaker to my phone. However, as it is a new account I need to add Spotify. I have tried to connect to it many times but once I finish setting it up on Spotify’s end, I come back to the app at it gives me this “Connection Error” to Spotify and I am unable to add my account. My speaker is currently connected through Wi-fi and is able to play music through the Spotify App but not through Sonos due to this issue.I don’t know what’s happening and what I must’ve done wrong
Just tried to use Trueplay Tuning on my Arc system and I got the message regarding it is not yet supported on this iPhone. I have the iPhone 14 Pro. I assume a software update will be coming soon for Sonos similar to what happened with the iPhone 12. Less of a question and more of a PSA
Howdy,I currently have a Denon AVR with Connect so I can listen to the multiple speakers in the room through Sonos and I use the “Media Player” button and corresponding input on the back of the Denon for this. My turntable is currently hooked up to the Denon AVR and I press Phono on the remote to listen to the turntable. I can only listen to the turntable in this room, not through Sonos.How would I add the turntable to Connect? And would it not run through AVR any longer? If it goes straight to the Connect, do I need to press anything on my Denon Remote to hear the turntable? How would I connect this and what would I have to push to hear it? Thanks!
I have recently swapped from Virgin to BT broadband with a smart hub 2. I can’t get my Play3 to connect to the new router. I have read multiple threads on here and the firmware is up to date. I have tried disabling the 5ghz channel on the router but it makes no difference. I get an error message each time. Any advice greatly appreciated.
Hi did a search but couldn't find this topic. Very basic question but my app can't connect to either the amp or arc soundbar for setup. The green light is flashing on both. Tried while connected to my regular wifi and also wifi 2.4 GHz. The wifi signal is fine at the location. Eg my TV streams things fine here. Any suggestions or mistakes I'm making?Thanks!
I recently changed my wifi password. WHAT A MISTAKE. Something that must be done by thousands of people regularly shouldn't be a complicated issue for Sonos products should it? Every other system and device I own was able to accommodate the change easily. However, sonos products wasted 4+ hours of my life that I will never get back. Self troubleshooting, reading online forums, sonos' own app provided no help. It took one hour just speaking with a customer service agent and physically moving my sonos equipment across the house to hardwire it via the ethernet first, then reconfigure the wifi. Absolute joke. It seems the only option available is to move your equipment from wherever it is located and plug your devices in individually via ethernet and try to navigate through the app. Good luck.
hi everyonei had to move in another city as a teacher, i took my play 5 with me, i dont think i’ll rehister to an internet provider. Do you think it is possible to use my device on the shared internet connection on my phone? I tested it many times but seems like it is impossible :(
Hi, I have a pretty simple issue which became complex enough to ask the forum. I have few SONOS speakers from IKEA (shelf and lamps) and want to connect them to my TCL TV (not Roku). The aim is to use a speaker from TV and SONOS (not SONOS only). I tried to find speakers via same WiFi - that didn`t worked. I tried to connect SONOS speakers via Apple TV (airplay) - that didn`t work, and as far as I read in that case you can only connect SONOS speakers, but TV speaker won`t work together. I can buy BEAM or RAY SONOS speaker - but as far as I`ve read I won`t be able to use my TV speaker together with other SONOS speakers. So, what is the simplest (and cheapest) solution to use in the same time fabulous TV speaker with Dolby Atmost, with IKEA SONOS speakers as rear speakers (without delay between TV and SONOS speakers) ?
Two simple questions:1.- Is it possible to combine a Paybase with a Submini?2.- Can a roam speakers be integrated also in the lan of speakers that I now have? Can I use a roam speaker from the sonos app and joining it with other speakers e.g. one that i have in the kitchen?ThanksICF
I have a large(ish) Sonos system locked down at 8.4 (because I still use CR100 controllers). The bridge has finally died so I have temporarily wired one of my ZP Amps as a bridge. Is it possible to buy a boost and use it, or will it need me to upgrade the system version (which obviously I cannot do).I don’t want to accidentally trash the CRs by adding a component that needs a higher software version.
Hello all. I’m working to rip an old non-functional crestron system out and simplify. What we haverack with 3x gen1 sonos zone units, ie unamplified devices that go into a crestron audio matrix. Plan to remove all of this and replace with 3x of the newer ‘AMP’ models. These run to 3 speaker zones.2x Direct TV receivers in the rack, routed through crestron. Looking for options here. Willing to move DTV boxes to each TV, but then how to get audio into Sonos. ‘Port’ units? What if I put a soundbar in at the TV and used that for input, can sonos take input on the sound bar and distribute it to the other speakers etc? ie, DTV->Arc->AMP1 and AMP2 and a Sonos One?Alternatively, keep DTV in the rack and figure out how to stream the video to each TV. Can’t figure out if there is an ‘on net’ streamer for DTV i can use or not. If they are in the rack, can I double duty the AMPs as inputs? For instance, DTV1→AMP1 then stream anywhere. And.. if so… can the AMP’s input be separate
i have Sonos Move but because of my OS (12+ on iphone 6) have to downgrade it to S1 in order to use it. I understand this means certain Move features may be lost but can’t find any info about what they might be. Anyone know? Another related question - if I downgrade to S1 can I then upgrade it back to S2 if I get the suitable OS (14+)?
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.