Components and Architectural

Let's talk about Sonos Connect, Connect:AMP, Sonos AMP, and setups using Sonance architectural, or your own speakers and components.

  • 2,176 Topics
  • 16,542 Replies

2176 Topics

A
Andy617Contributor I
posted in Components and Architectural

Integrating sonos into existing surround sound speakers and amp

I understand that I can convert my existing wired speakers to Sonos with a Sonos connect device however I can't find info about how to connect an existing five speaker (5.1 surround driven by an existing Yamaha receiver/amp) to sonos. Can this be done and maintain 5.1 ? Is it as simple as using a sonos connect along side my amp? I also have other existing in ceiling speakers in other parts of the house and realize to integrate them to sonos app for zone control I need more sonos connects but that's another topic (as well as adding sonos speakers for new zones etc). For now it's about my ability to use sonos to drive my existing 5 speaker sourround system. Th for any help.

3
J
6 years ago
J
jeff_151Contributor I
asked in Components and Architectural

my connect amp has a blinking white and amber light?

18
N
6 years ago
Z
ZkiiFreakAvid Contributor I
asked in Components and Architectural

Connect:AMP and 4 speakers. Safe?

Hi everybody I would like to hear about experiences from connecting 4 speakers to a Connect:AMP. Both good and bad! I’m building a new house and are able to wire exactly as I’d like. I would like to connect 4 B&W M-1 8-Ohm speakers to my Connect:AMP. According to Sonos this is doable, https://sonos.custhelp.com/app/answers/detail/a_id/269/kw/connect:Amp%202%20pairs%20of%20speakers?&_ga=2.142373233.2117714235.1518856759-457690909.1481985784#4_speakers , but my local hifi-pusher says it’s gonna blow the speakers with 70% certainty... I’m a little reluctant to connect 4 speakers then... Or is my hifi-pusher playing it safe or not a hifi-pusher at all :8 All replies with thanks in advance!

10
I
4 years ago
K
KalikratesContributor I
posted in Components and Architectural

Surround setup with single Sonos Amp

Is the following setup possible with a single Sonos Amp? From press releases about the Amp I thought it was, but I find it strange that it's not mentioned in the online manual (https://www.sonos.com/support/en/sonos-user-guide/index.html#t=sonos-user-guide%2Famp%2Famp.htm): - TV connected to Sonos Amp via HDMI arc. - Passive wired speakers connected to the Sonos Amp wired terminals, providing two front channels + phantom center. - Sonos Sub connected to the sub terminal, providing the .1. - Two Sonos wireless speakers connected wirelessly to the Amp, providing the rear channels. I know is otherwise possible to get surround sound with two Amps or with a Playbar/Beam + Amp, but I would like to avoid that (both for price reasons and because I prefer rear speakers to be wireless, so as not to have visible cables through the room). So I was hyped on the possibility of the above setup. I hope it's possible even if it doesn't appear in the manual. Also another question (secondary)

6
melvimbe
4 years ago
A
Atrzop1Contributor I
asked in Components and Architectural

Music works fine but tv sound won't play

Just came home from vacation and now my tv sound won't come out of my playbar or sub....music works fine. It worked fine now it doesn't. Any suggestions?? Thanks!

10
AjTrek1
5 years ago
J
jhzarchContributor I
asked in Components and Architectural

How to connect Outdoor speakers to Sonos

What is the best way to hook up my outdoor speakers to my existing Sonos network? I have a Sonos Connect in my living room for my home theater and 2 Play1's throughout the house...Is there an AB selector that I can get to install between the Connect & my outdoor speakers / home theater? I was thinking I could use this to separate the signal or have both "zones" play at the same time. Then I would buy a cheapo amp to power the outdoor speakers. Any help would be great!

5
K
6 years ago
M
MorhausContributor I
asked in Components and Architectural

Sonos: Amp - connect with bluetooth receiver

I just put the Sonos:Amp when I was told it could pair with bluetooth items, namely my outdoor receiver connected to speaker on deck. I can't figure out how to do it though!!

6
S
3 years ago
N
nbnverbContributor I
asked in Components and Architectural

Will 2 play 5's Work with playbar? Or did I make a mistake?

I just bought into the Sonos Experience on New Years. The sales rep. said their was rumor of the playbar..which led to my decision to buy (2) play 5's, in hopes that in the near future I could also use them for Hometheater experience. What I have read thus far concerns me. No mention of Play 5 combined with Playbar.?? Will they work, or did I make a mistake....??

58
K
6 years ago
G
geodrAvid Contributor I
posted in Components and Architectural

Connect vs Port vs Bluesound sound quality?

Has anyone upgraded from Connect to Port and noticed any appreciable improvement in sound quality (with same source material and speakers, of course)? How about any audible difference between these Sonos products and the Bluesound node 2.0i, preferably using same source?  (I would expect Bluesound with Hi-Res streaming to sound better than Sonos)

34
B
3 years ago
P
Psy_boyContributor III
asked in Components and Architectural

Nvidia Shield and Sonos

Hi there. So, I have an Nvidia Shield, and 3 Play:1's (one of them is being used in the kitchen only). I really want the sound from my shield (when using Kodi etc) to go out through the Play:1's I know this is not possible without another Sonos Product. This is why Im strongly considering buying the Connect. My question for you is: Will I be able to output sound from my Nvidia Shield, when the Connect is plugged into my Smart tv?

10
J
6 years ago
P
PlexioContributor I
asked in Components and Architectural

Sub Watts?????

What is the watts output on the Sonos Sub?

5
K
4 years ago
B
Big SteveContributor I
asked in Components and Architectural

SONOS integration with Denon AVR for multizone audio

New to sonos having recently purchased a PLAYBAR and PLAY1 for my main living room tv and dining area. I am enjoying the ease of use. I need some help on integrating sonos into my new pool house and dedicated media room. I have very limited knowledge of AV equipment. Brief description of setup-with a goal of 3 audio zones: ZONE 1: Media room with Denon AVR X3400H and 5. 1 surround set up (not using sonos speakers for the surround set up). Denon AVR output to projector and outdoor tv. Cable box, DVD player, and Roku input to receiver. Sonos CONNECT hooked up to AVR-*see below ZONE 2: outdoor tv, one pair of outdoor speakers( wired into closet in media room). Outdoor speakers powered by CONNECT:AMP ZONE 3: 2 pairs of in ceiling speakers indoors in the pool house-but separate from media room (again wired to av closet in media room). In ceiling speakers powered by CONNECT:AMP My goals are: 1) Be able to stream music from sonos app to one or any combination of the audio zone

1
Chris
5 years ago
E
erbem8c0Contributor I
posted in Components and Architectural

Sonos Connect Amp and Speaker Volume

I just got a connect amp and wired it up with a pair of outdoor Polk Atrium 4 speakers. After I got everything installed I went to play some tunes... I had to have to volume to about 50% on the slide bar on the app before I really heard any music out of the speakers, and even then it wasn’t very loud and I was standing right next to the speakers. If I had the volume up to 80% or higher it got closer to a normal listening level, but didn’t leave much room for advancement. I typically listen to my play 1 or sound bar between 30-50% unless we are having a party. I’ve read other reviews where the Sonos amp and a pair of outdoor speakers is blowing their neighbors away, I don’t feel like mine are getting that loud. Do I need better speakers or is it the amp?? I bought the amp open box excellent condition from Best Buy, I just want to make sure something isn’t wrong with it before my 15 day return window is up. Any feedback would be appreciated!

39
K
3 years ago
J
jmaContributor I
posted in Components and Architectural

Issue with Connect:AMP and Volume

I'm a few months into my Sonos setup, and absolutely love it. Yes, my first (two!) cars didn't cost this much, but I consider it one of the best investments I've ever made. I have 5 zones with a mix of Play:5 and Play:3 speakers, and also using my own speakers -- which is where the trouble is. In my living room, I have a Connect:Amp hooked up to a pair of Polk RTiA1 speakers ([url]http://www.polkaudio.com/products/rtia1[/url]). The sound is... disappointing. I should clarify: The sound is spectacular, certainly more sophisticated than from my Play:3 or Play:5 speakers, which already sound great. But it doesn't seem as "powerful" as it should be, for lack of a better word. For one thing, with all zones on the same volume setting, my living room speakers are noticeably quieter than the others. I have to turn up the volume in that room by perhaps 20% to equal the volume being played elsewhere. Also, with the volume set somewhere around 5% maybe, there's not really any music coming o

40
S
5 years ago
G
gordonpmTrending Lyricist I
posted in Components and Architectural

Sonos App on TV?

I very much expect this has been asked for before, but is there any way to display/use the Sonos controller on the TV? I'd really like to see the album art, queue etc and be able to have a good way for guests to see/choose music and for that to be a conversation point even! An app shouldn't be too hard to implement on the major brands of smart TV. Much of the industry is driving towards making the TV the entertainment hub for the home.

21
Chris
5 years ago
C
charger28Contributor I
posted in Components and Architectural

"Jukebox" Mode

I have a number of clients that have installed Sonos in their bars/restaurants. A lot of them wanted us to recess an iPad into a wall (using Sonance mounts) and use the Rhapsody service exactly like a jukebox. The only issue is that the customers would constantly override the existing song by selecting "Play Now". Would you consider adding a "jukebox" setting that would only allow the user to "Add to Queue"? The "Play Now" feature is also an issue at my house when there is a party. Most people do not have the patience to listen to a song picked by another individual. I would love to be able to lock down this behaviour.

31
jgatie
6 years ago
P
PaperDandelionContributor I
asked in Components and Architectural

Why can't I just use you like any other speakers?

So it's Boxing day, and I've just received a lovely big SONOS Play:1 speaker for Christmas. I set the speakers up and try to find them on my system. Nothing. I do some research, trying to figure out why I can only play through SONOS app and verified programmes approved through the SONOS app. Why something which clearly cost more than a few pretty pennies is essentially useless for anything other than playing music. No live sound, no video sync, nothing but music through SONOS. So the decrepit old speakers I have had since 2000 are essentially doing a better job than the basic model of SONOS. Not only this but my cheap shower bluetooth speaker I bought for my boyfriend (£5.99) can do what this supposedly amazing modern and high quality technology cannot. Which is play ANY sound off of my computer or phone that I want it to. How is this a complicated concept and why, after literally years and years of community comments and wailings and clearly strong customer dissatisfaction hav

120
chicks
6 years ago
T
thetimallenAvid Contributor I
asked in Components and Architectural

How to remove items from list of my devices

I have been going through my many Sonos devices trying to upgrade the ones that need it.    When I am on the Sonos site looking at my devices it lists several that I threw away years ago. A bridge, a ZP90, the original remote control.    Is there any way to delete these devices?   In searching for this question on this forum, all I see is that if the device is given to somebody else, it will be removed from my account when they activate it on their account.  But in this case, I threw the things away. So there is no new account.    And yes, I know having the old devices listed does not hurt much; but it hurts my need for organization!

7
106rallye
3 years ago
P
pciavContributor I
posted in Components and Architectural

Would You Buy an Ampless w/Digital Out "Zone Player Pro"

This topic has been beat to death on this forum. I am hoping this thread generates enough interest to at least peak the interest of the money makers at Sonos and hopefully this or a version of it is put into production. [b]A "Zone Player Pro" would be Ampless and have One (1) Coax and One (1) Optical Digital Outputs in a standard 17" Audio/HT component case.[/b] Forget any and all other requests, for now, such as rackmount, color, additional features, or a Price Reduction. Lets assume it will cost the same as the current Zone player $499, anything less would be a bonus. [b]Simply put, do you want and would you purchase a "Zone Player Pro"[/b].

73
J
17 years ago
G
Grant BContributor I
asked in Components and Architectural

Extremely Low Volume on Speaker

I have a bridge and connect which are both showing as active and setup correctly (I've had my Sonos for 4 years with no issues until now). However, suddenly the volume on my speakers is insufficient (like a whisper even when turned to max volume). Any suggestion please? I tried calling the 800# but the wait time was well over 30 minutes.

11
John_314
4 years ago
T
tomcross7Contributor I
asked in Components and Architectural

Setup unexpected error

Trying to setup 2 Sonos play 1 through iPhone app following the steps in the standard set up I choose my first play 1 it deosnt ask me to press anything on the device goes straight to airport setup gathering information about my network asks me to set the name then try to set the play one to my wifi info on screen says waiting for sonos 1 AND THEN unexpected error try different setup how do I setup the up with iphone

7
Chris
5 years ago
S
Stefan5474Contributor I
posted in Components and Architectural

New Sonos Connect?

I have been wondering for a few years now. Will there ever be a new Sonos Connect? Something comparable to the Bluesound Node 2 in sound quality and design. The Connect seems so hopelesly outdated.

47
chicks
4 years ago
X
Xpert PopoContributor II
posted in Components and Architectural

Connected ZP120 to 220V in 110V setting

I got a ZP120 in 110V mode and connected it to a 220V current. Now, unsurprisingly, it does not work anymore. I could obviously bring it in for repair but I am wondering whether I could take care of that myself in a more timely fashion. Obviously I will loose my warranty by opening the ZP but I don't mind as long as I know for sure that I can fix the problem myself (otherwise I would loose the warrenty AND not got the ZP working again!). Could someone tell me whether there is something simple like a fuse or so inside that I could simply replace?! Does anybody have experience? Sonos staff, can you help me? I am surprised anyway that the controllers ship with 110-220V adapters while the ZP have to be switched manually. But that is another discussion... Thanks for any help!

17
I
6 years ago
S
Sonos IdeasSonos Employee
posted in Components and Architectural

One SUB for Two Rooms

Customer suggested adding the ability to bond a SUB with 2 different Sonos devices.

113
Zjoskuh
2 years ago
Wheezy Rider
Wheezy RiderContributor I
asked in Components and Architectural

Solid red light on 'Connect' after failed update

Hi Guys, hoping somebody may be able to help me out here please. On Sunday my system prompted me to update, which I did but then the update failed to complete, which is a new one on me. The 'Connect' in my system has now disappeared from the controller and has a solid red light on the front, I have tried various reboots and even tried a reset but the unit appears unresponsive to even this. I have 2 x play 3, 1 x play 5 (mk1) along with the connect controlled by iphones. I've had various intermittent problems over the years with all of it, mostly local network issues but this is the first time a unit appears to have failed completely. Any thoughts would be gratefully received. Bill

4
Z
5 years ago
Terms & ConditionsCookie settings