Let's talk about Connect, Connect:Amp, Sonos Amp, Sonos Port, and setups using your own speakers and components.
- 3,499 Topics
- 19,983 Replies
Greetings All, I've just recently purchased a connect and a play 1 as my starters. Everything set up fine and I'm pleased with the sound quality. My difficulty now is getting sound out of my receiver (reason I purchased connect so as to "connect" with my A/V receiver) I have it connected with the supplied RCA cables to my CD line in. No sound coming out of my wired speakers on receiver. I've connected several audio components into that CD line in and PRESTO, I have sound. Connect cables back to the connect unit and nothing (music is still coming from play 1 speaker though) Any suggestions? I'm I missing something blatantly obvious? Thanks MRod
Hello, I am considering adding a Sonos Connect (not Connect AMP) to my Sonos setup at home. It should output using the analog RCA to a pair of ROKIT 4 G3 (http://www.krksys.com/krk-studio-monitor-speakers/rokit/rokit-4.html) I was wondering if it would work? I know that the Rkit is powered, but the Connect is meant to be attached to a receiver and not directly to speakers. Any idea? Thanks
I have some speakers wired to a sonos ConnectAmp through a speaker selector. What I want to do is to put a switch in each room to cut the line of each speaker in a room so I can switch off the speaker. Will this be possible to work without any problems? If I will have switch off all the speakers in every room and I start the sonos ConnectAmp to play sth from the controller will it be ok or it will do any problem to the system? Thank you in advanced, Antonis Georgiou
So about a year ago I bought into sonos with a play1 in the kitchen. Great speaker, play Spotify and all good. Then came Alexa dot into the kitchen, excellent device and the way ahead, can play Spotify, radio etc all with a simple command. Sound is pretty crap though. Can't connect dot to sonos as latter has no connectivity options. So I have an excellent music interface (Alexa dot) and an excellent speaker (play1) but they don't connect. Alexa voice is the way I'm going for ease of use. I could buy an echo for bit better sound quality, or wait for next round of products. But what do I do with what's becoming a redundant play 1? It's like having a smartphone with no touch screen.
hey everyone, I am designing a wall from my TV, this wall will have a fireplace below the TV, the goal for the wall is simplicity. Ideally, I'd like to just have the fireplace recessed into the wall, and the TV above it. That being said, what are the issues or drawbacks to positioning the PlayBar on top of a cabinet that is directly to the right of the TV? from the right edge of the TV to the start of the cabinet will is about 6-8 inches.
I currently have a few Sonos speakers throughout the house (PLAY1, PLAY3, PLAY5) and really enjoy them. I have an older 7.1 Surround Sound Home Theater system that works just fine for our needs, so I don't want to completely replace it yet, but I would like to add SONOS capabilities to it and pair it to our other speakers when we would like. I've included a link below to the system we have. If I understand correctly, would simply purchasing the SONOS:CONNECT Receiver be what we need to accomplish our goal here? The existing system has a receiver, so my understanding is that I would not need the SONOS:CONNECT AMP for this purpose. Just wanted to make sure! https://www.amazon.com/Samsung-Electronics-HT-D6730W-Theater-Version/dp/B004OCN6ZG Thanks in advance!
I have a REL Strata 3 subwoofer which is self powered and can accept both high level and low level inputs. Is it possible to use the low level outputs of a Connect to power the sub or must I go with a Connect Amp and use the high level outputs? Anyone have experience with this? Thanks for any advice and I apologize if this has been asked and answered previously...
Hi I have turntables & a Traktor z2 mixer plugged in (with phono cables) to a Sonos connect, playing wireless from 2x grouped play1 speakers. I'm experiencing a lot of delay between the music I can hear directly through my mixer (with headphones attached) and the music that plays through songs speakers; causing beat matching issues etc. Is there anything I can do to improve this? I ran a diagnostic & the number is 5248173. Thanks, Alex
Hello friends. I have an old Sansui G-4500 Pure power Stereo Receiver (connected) to a Dual turntable and an AKAI cassette deck) and I am considering replacing the speakers with Sonos equipment. I believe I need CONNECT with my set-up, not CONNECT AMP. My speaker wires are older school, i.e. naked ends both sides. And the Sansui has a set-up to receive naked wire ends at the back. What do I do? Do I get speaker wire with RCA in one end, and naked wire ends at the other? Do they exist? I appreciate your input and i hope I am clear in my question.
My issue is I have three Play 1's and one Connect with a turntable/preamp connected to it. My internet/router is plugged into a single Boost and I direct connected my Connect to the Boost. My turntable cuts out though and I have to jack the volume way up. I'm wondering if I have it set up correctly. Might need some walking through. Help!
I have a pair of Bose 251s out in the backyard. I just purchased the Sonos Connect:Amp. After the fact, I noticed that the Boase 251s are rated 6 ohms and the Connect:Amp is rated 8 ohms. I'm not too familiar with the ohms issue, but know enough that I risk burning out the amp. Can the Connect:Amp safely power the Bose 251s?
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.