Problems finding Sonos system when using powerlink adaptor to extend home network
My kitchen is a wifi blackspot and so I have used a TP-LINK AV200 power-line adaptor to extend the range of my wifi to that room. So I in effect have two wifi access points (for present purposes, lets call them HomeNet and HomeNet-TPL). My kitchen is the room we use the most and the Sonos Play 5 we have there connects to HomeNet-TPL. At least, I assume it does since they are next to each other and HomeNet doesn’t normally reach the kitchen. The Sonos Bridge connects by Ethernet cable to the Homenet Router. The problem is that my iPhone App doesn’t always find my Sonos Network when it connects to HomeNet-TPL (as it normally does when I am in the kitchen) and so I cannot control Sonos. I normally fix this by walking towards the HomeNet Router and then when my iPhone connects to that part of my network it then finds Sonos. However, this is an intermitted problem. Sometimes, my iPhone app does succeed in finding Sonos when it connects to HomeNet-TPL. Any ideas to avoid this annoying problem? It is embarrassing when I have friends around and show off my Sonos system and then my controller app can’t connect! They aren’t impressed.
This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.
Already have an account? Login
Login to the community
Log in or register to reply
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sonos do not support connectivity via powerline extenders, but this is clearly a problem for larger houses where the router wifi does not cover certain parts of the property. My problem mirrors that of the raiser of this ticket - Sonosnet works fine in my kitchen (Play:3) but I stuggle to connect to it via iOS apps through my powerline extender.
My extender has the same SSID as the main router, the security settings are fixed and match, I have reserverd IP's for all Sonos and mobile devices and channel separation is good (Router-1, Powerline Extender-6 and Sonos-11).
Basically I have to renew the wifi lease in order to connect to Sonos via the wifi extender in my kitchen. This is done my turning wifi off/on on the mobile device or going into wifi settings and selecting 'Renew Lease'. Once connected I have no issues until I leave the property or shutdown the device. I then get the issue again.
This is an annoyance and not good user experience considering the relative value of the equipment.
What's really weird is that the Sonos Play has absolutely no trouble connecting trhough the powerline extender. Its only the Sonos App on the iPhone (or on a laptop) that can't connect to Sonos through the powerline extender.
I gave up with Sonos help line, whose suggestion in the end was not to use powerline extension.....
I'm also on the Beta programme and updated to apps v5.2. I don't know if this had any impact on my connection.
The downside is that the wifi repeater signal is weaker than the wireless powerline extender signal - effecting the performance of all other apps that use the signal.
Sonos is a product predicated on wireless. The product documentation and support material should be much clearer and detailed about connecting Sonos controller apps to Sonos Players in locations that are out of range of the primary router wifi signal.
Sorry to revive and old(ish) thread, but i have the exact same issue as described by the original poster.
This thread is marked as solved, but the only solution I can see is to remove the extender. Is that correct? If so its a fairly unsatisfactory solution because no one installs an extender unless they need it.
@TheManOnTheBus, did you get to the bottom of this? If so how please?
Thanks a lot for any help, its driving me mad!
So Graham - no I didn't get to the bottom. As Stephen says, it won't work with a powerline connector. I have not yet got round to getting a wifi range extender, but it is on my "to do" list.
Agree that Sonos - at its price point - should solve this.
Do they read these forums?
User127.. Your solution might the one i use for now and hope that Sonos make an effort to solve the issue in future, so thanks!
The problem is we're all invested now. If i had know this up front i might have thought twice about sinking almost £1000 into the system. It should be written very clearly on the box/website etc that Sonos does not work with powerline extenders, which i am sure is a common setup.
I think Sonos need to to be more proactive or they will see their market share dwindle as new contenders come into the multi room streaming space, Panasonic, Denon etc...
Further to User127..'s suggestion to renew the lease, it transpires that turning aeroplane mode on then off does the same thing as the steps mentioned above. I have tried this a few times and it has worked every time.
Whilst still not perfect, it makes connecting much less clunky.
Hope thats helpful, let me know how you get on with this.
PS a SONOS technician pointed this out to me..
Another solution I am thinking off is to hire wire an Ethernet cable into the location I currently have a PowerLine adaptor. I assume that will work (ie the iOS device can connect to Sonos through an appropriate ACcess Point). Anyone any experience of tat?
Nevermind, they have at least changed the controller app a few times and made it less user friendly instead. Go Sonos, you have your priorities just right! 😉
Resolved what issue? Sonos has always been clear that Powerline connections aren't officially supported, though some people get good results nevertheless.
For streaming purposes Powerline has highly variable available bandwidth, and some models block broadcast traffic making it impossible for a controller to discover the Players. Neither are Sonos' fault.
Why would they spend the time to update software to support a configuration that they officially do not support? There is a reason powerline adapters are not supported, it is because their performance is greatly dependent on the age and usage of your electrical system, for which there are no standards. Programming to and/or supporting that type of non-standard infrastructure would be a support nightmare, which is why they do not support it.
Power lines were designed over a century ago to supply 50Hz or 60Hz energy for lights, appliances, and industry. There was no anticipation of a future attempt to stuff music and video onto these wires too. Using some very sophisticated technology, we can superimpose a high frequency "carrier" on the power lines to facilitate sending some data over the power wiring, but this is a very fragile situation because, to some extent power wiring picks-up stray radio and TV transmissions and this can cause interference with electronic devices such as TV's, radios, and computers. To mitigate this interference we install filters to strip this stray high frequency energy from our power lines. This is a touted feature of all of the up scale surge suppressors -- resulting in better audio and TV and more robust computing.
On one had we are stuffing a high frequency carrier on to the power lines, but "best practices" suggest that we should strip all high frequency information from the power lines. Even if we don't explicitly strip the carrier, large appliances such as microwave ovens, furnaces, and air conditioners tend to absorb the carrier -- unless they have been specifically designed not to do this.
Bottom line, transmitting audio, video, and data over power lines is hit or miss and very much depends on the local situation. Some users report success while others report frustration. Further, a working situation could be disrupted after the installation of a new appliance as simple as a modular power supply. Personally, I would not design a system to rely on EoP (Ethernet over Power Line), but EoP is worth a try in situations that are too hostile for WiFi or SonosNet wireless and pulling Ethernet cables is not practical. Sometimes EoP is a miracle, mostly it is a frustrating waste of time.
I use Sonos to distribute wifi throughout my house this way. I have Sonos everywhere to create the sonosmesh, then connect a wireless access point a sonos on each floor.
Interesting thought from Buzz to get an access point connected to the SonosNet which I will immediately try and sort out. Does an "Access Point" have the same network name as the main wireless point? Will devices get confursed "roaming" from one to the other. I really don't know. I assume not but will give it a go.
One point though on your earlier comment that electrical wires were not designed for audio etc. All that seems to be going over it though as far as Sonos is concerned are instructions to the SonosNet since the audio doesn't use it. So rather simple and presumably non-intensive audio. So still surprised that Sonos do not somehow fix the lack of network "purity" with some software fix.
But thanks anyway.