Answered

Connect AMP Hookup to AVR

  • 30 May 2018
  • 2 replies
  • 203 views

Hi Folks,
I have a query. I have a connect Amp driving a B&W 685 S2. I would like to connect an AVR to the entire setup so I can play the audio coming from PS4, Chromecast etc through the AVR.
My question is, if the AVR supports Pre outs, will I be able to connect the preouts to the Line-In of the Connect Amp?
If it works, Is there any other parameters such as impedance I would need to be aware of while doing this?
Thanks in advance.

-Regards,
Tejas
icon

Best answer by Stanley_4 30 May 2018, 06:55

Shouldn't be a problem, nothing to worry about as far as the connection.

The pre-outs will be after your volume control so you'll have to crank that up a bit if you find the Sonos volume low even with the Sonos volume at the top of the range. You might try using a tape-out instead that is ahead of the AVR volume control and see if you find that a better option.
View original

This topic has been closed for further comments. You can use the search bar to find a similar topic, or create a new one by clicking Create Topic at the top of the page.

2 replies

Userlevel 7
Badge +21
Shouldn't be a problem, nothing to worry about as far as the connection.

The pre-outs will be after your volume control so you'll have to crank that up a bit if you find the Sonos volume low even with the Sonos volume at the top of the range. You might try using a tape-out instead that is ahead of the AVR volume control and see if you find that a better option.
Great! Good to know. Thank you Stanley.