Recently moved an audio system to run off the sonos port. Have 7 in total. We have a playlist from apple music of around 350 songs (about 22 hours) and the sonos keeps stopping before the playlist ends. The sonos settings are on repeat and shuffle. I am at a loss to get this to keep playing. The goal is to have the music playing 24/7 streaming from the sonos. Checked in the apple music app and cannot find anything to set the list on repeat or change any settings like that. Any suggestions would be helpful.
Hello!There is a new Sonos Port in our office. The Sonos Port is located in the server cabinet, connected via an ethernet wire to the nearest switch. The network is new and the Internet is about 200 Mbps. There is only one subnet. There are no conflicts on the network. The network engineer confirmed it. I noticed a problem connecting to the Sonos Port with the new S2 version (updated). The updated Sonos Port (with S2) is not detected on the network. I tried to connect from my smartphone (Sonos S2 App), and also tried to find it from my computer (with Sonos S2). A long search for the device, eventually not to be found. Then I made a rollback (Downgrade) to the S1 version. After the rollback, the Sonos Port began to be detected normally on the network. In the previous version, an update message is intrusively coming out. Dear developers, please check this situation, it is necessary to fix the bug and optimize the new version of S2 for Port. Thank you!P.S. Please move the topic to Audio C
Hello - hopefully a straightforward question. Is the ZP90 compatible with AirPlay 2? The reason I’m looking at one of these is to stream audio to my HiFi as it has both optical and coaxial audio out, where the Port is limited to coaxial only. Thank you
I have 4 Play 1 speakers, I also have a projectorI would love to be able to connect the sound from the project to at least two of the Play 1 Speakers. is there any recommendation, I am willing to buy Bluetooth receiver, streamer, etc.
The subject line says it all. I have been using Sonos 1 and SonosNet because my CR-200 is a heck of lot more convenient than messing with my cell phone every time I need to interact with Sonos. The problem now is that SonosNet has become more problematic with multiple dropouts. I was about an hour on the phone with tech support (thank you, Sonos) but to no avail. Rather than continue to troubleshoot this (and I’m sure there is ultimately a solution since it used to work flawlessly), I’ rather switch to WiFi if it’s more robust. Thoughts?
Good morning,When I listen to albums from my music library I click to launch them and then the application shuts down and restarts, this is each time I launch the application for the first time of the day on the Windows desktop.Then I noticed there on the Android phone application, that if I select a Radio from Sono Radio which is systematically a favorite on each first launch it will launch me the last radio that I listened to while I click of course on a different radio.Thank you in advance for your assistanceActarus Moderator Note: Modified in accordance with the Community Code of Conduct - mention of Beta program
I have a Symfonisk (Gen2), brand new. I can set up the Symfonisk up in the app, however upon completion it states I may need to unplug and then replay the speaker for it to show in my system.It doesn’t show in the system. I have unplugged it for for varying lengths of time. I have tried on both an iPhone and android phone. I have tried resetting the Router/WAP. I have factory defaulted the speaker and reset it up with the same issues. The device is on the other side of the wall from the WAP.My router/WAP as well as the ISP is AT&T , the network name has no spaces or special characters. My password has special characters. I have even take. The steps of assigning a static IP and when that didn’t resolve it, I even MAC filtered the device so it’s always allowed. I also adjusted the channels on both 2.4 and 5 to mitigate interference.I can set the speaker up just fine but then it vanishes the moment setup is complete. Any help would be appreciated. I remember Sonos being a pain in the
I’ve had my Sonos system working ok until recently. Underwent an ISP change that threw some things for a loop.Where I’m at now is….I have an Apple Music Subscription. What I’d like to be able to do is download one of my Favorites playlist to the local hard drive. Then, add that folder or playlist to My Library in Sonos so I don’t have to rely on streaming as much but rather play these local files that Apple lets me use for offline use. Is this possible with Sonos/Apple? I’ve been trying my best to add it and it does not work. It will however recognize files I uploaded to Apple Music (so I guess they look at them as mine), but I can’t get the other local downloaded files to appear. Any way to do what I’m thinking? Thank you!
I have 4 Play 1’s, a Boost and a Connect. Wife and I both have iPhones with the app. Her phone has no problem connecting and using the speakers. My phone says it can't connect to the system. When I go to trouble shoot it says it says it see all of my units but when I go through the steps to reconnect, it says it can't connect. Tried uninstalling and re-installing the app. No good. I love my speakers but I have more issues like this over the last couple years than I care to remember. Anyone have any ideas why my phone would have problems and not my wife's? Any solutions for a fix?
Why not Sonos play in Spanish ?
I won’t repeat what MANY have described in detail and (for years) regarding the Sonos app’s inability to shuffle >500 music service songs. My question is rather straightforward..what is Sonos doing to fix this long-standing issue? And why do Sonos support reps not understand this major software issue and are able to acknowledge it even without a fix? BTW and working in software myself, this feature gap seems something Sonos should prioritize. This is something one shouldn’t encounter with a premium brand. Frankly I’m a bit embarrassed having invested thousands of dollars outfitting my new home with 11 Sonos speakers.
Noticed the new “Info Hub” button at the top of the page? We're excited to introduce the Info Hub, our new knowledge base for essential "how-to" guides.At the moment it contains guides on “How to use the community”, but this hub will expand in the future to cover a wide range of topics.Feel free to browse the articles and tell us what you think. Did you learn something new? Or do you have ideas for other guides you think would be useful for other users on the community?Reply in the comment section below and see if other users agree and we might create such a guide for the Hub. No promises though 😉
I have a pair of Apple AirPods Max and was hoping there was a way of making them work with my Sonos Amp to get wireless sound to them via a line in source. I stumbled upon this link which made it appear it was possible using Bluetooth 5.0. No luck so far, is this fake news?https://soundscapehq.com/can-i-connect-bluetooth-headphones-to-sonos/For what they say, Sonos would have to output bluetooth which I’m not convinced is possible.
Good morning,For 2 days the Sonos app has no longer worked on my Ipad Mini 2 (12.5.7). The Sonos logo appears then the app closes but remains active.Thank you for your reply
Already have an account? Login
Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.